Installation of PVC louvers on front wall inside PPA and renovation of roofing with polycarbonate sheet.

Demolishing brickwork manually/ by mechanical means including stacking of servicable materials and disposal of unservicable materials with in 50mtr lead as per direction of Engineer in Charge

Demolishing cement concrete manually/ by mechanical means including disposal of materials with in 50mtr lead as per direction of Engineer in Charge. Cement concrete 1:3:6 or richer Mix

Dismantling tile work in floors laid in cement mortar including stacking materials within 50mtr lead. For thickness of tile above 10mm and upto 25mm

Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50mtr lead as per direction of Engineer in Charge.

Dismantling wall panelling /aluminium /gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservicable materials and stacking of servicable materials within 50mtr lead as directed by Engineer in Charge.

Conveyance of dismentled materials, rubbish etc. including labour for loading and unloading beyond initial lead all complete as per direction of Engineer in charge. truck load upto 3 km.

Diluting and injecting chemical emulsion for POST-Constructional anti-termite treatment at points of contact of wood work by chemical emulsion chloropyriphos/ lindane or emidoclapoed (oil or kerosene based solution) @0.5 litrs per hole by drilling 6mm dia hole at downward angle of 45 degree at 150mm centre to centre and cealing the same all complete as per direction of Engineer in charge.Chloropyriphos /Lindane emulsifiable concentrate of 20% with 1% concentration OR Imidaclopid 30.5 EC.

Providing and finishing with 12mm cement plaster of mix 1:6 ( 1 cement : 6 Sand)

Providing and fixing aluminium work for framing with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene flt etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge. Powder coated aluminium (aluminium thickness of powder coating 50 Micron)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. 12 mm thick