SPECIAL REPAIRS TO MD ACCN NO 650 4 650 9 650 10 NEW RANGE LINE OF NO 1 TRG BN BEG AND C ROORKEE AND PROVN OF DRAINAGE SYSTEM FROM BLDG NO P 202 TO T 11 TECH STORES OF 9 HORSE LENGTH 350 MTRS AT ROORKEE UNDER GE ROORKEE

Amount

Taking down Chowkats or frames exceeding 1.5. Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.50 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

Taking down & Refixing in the same opening shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

M&L for MS framed work of angle, tee, F.I conforming to Fe 290 Gde E-165 as in door bchowkats, gates etc including welding complete all as specified and directed.

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneer complete all as specified and directed.

M/L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having aPVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F steel windows with side hung shutters including pintal type hinges with MS handles and tower bolts complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.

M&L steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Dismantling Wrought iron or mild steel work of any description not otherwise provideded for complete all as specified and directed.

Resecuring or Easing and adjusting of steel window without taking off glazed & gauzed shutters including oiling, greasing and welding if required and make it functional complete all as specified and directed.

S&F in repairs steel window handle(pressed handle stove annealed black ) right and left all as specified and directed

M&L in repairs 18/19mm thick pre laminated particle board, water proof and termite proof, exterior grade, pre laminated on both side with decorative choice lamination fixed with nails all as specified and directed

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and directed.

S&F Hasp and staple of size100mm, safty type aluminium anodised with steel hinge pin including bolt hinge plate and fixed with screws all as specified and directed

S & F MS Chowkhat Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 gGde E-165 complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repairs Galvanized mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed type C-21 complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 200 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.

S & F 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F in repairs 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed.

S&F harison rail MS CP with fixing bracket, stops etc. all as specified and directed by Engineer-in-Charge

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismatling of PVC water tanks of 500ltrs capacity all as specified and directed

S & F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Hexa nipple suitable for HDPE water tank (min weight 20mm-45gms) complete all as specified and directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

Refixing 15 mm steel tubing and connection in new or old position wall, celing, floor complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and directed.

S&F in repairs 100mm bore cast iron (sand cast pipe) soil waste and vent pipe with cement joints laid in trenches or floor all as specified and directed

S&F in repairs100mm bore cast iron (sand cast pipe) soil waste and vent pipe with cement joints fixed to wall all as specified and directed

S&F in repairs 75mm bore cast iron (sand cast pipe) soil waste and vent pipe with cement jointsfixed to walls all as specified and directed

S&F in repairs 50mm bore cast iron (sand cast pipe) soil waste and vent pipe with cement jointsfixed to walls all as specified and directed

S&F in repais 100 mm dia., Cast Iron Bends (any Radius) with oval access door, diminishing pieces or tapers complete all as specified and directed.

S &F in repais 100 mm dia., Cast Iron Bends (any Radius) , diminishing pieces or tapers complete all as specified and directed.

S &F in repais 100 mm dia., Cast Iron Branch pieces, Single (equal or unequal), ordinary or inverted (spigot or socketed type) or with parallel branches with oval access door complete all as specified and directed.

S & F 75 mm dia., Cast Iron Spun Bends (any Radius) with oval access door, diminishing pieces or tapers complete all as specified and directed.

S & F 75 mm dia., Cast Iron Spun Bends (any Radius) diminishing pieces or tapers complete all as specified and directed.

S&F cast iron cowls 50mm dia bore complete all as specified and directed.

M & L in repaisfor Cast Iron Nahani trap of 75 mm outlet plain with grating including jointing to waste pipe in run leadfixed in cement mortar complete all as specified and directed.

M & L in repairs for Cast floor of 75 mm outlet plain with grating including jointing to waste pipe in run leadfixed in cement mortar complete all as specified and directed.

Extra over Cast Iron Pipes and fittings if lead joint is provided I lieu of cement joint for 100 mm bore pipe complete all as specified and directed.

Extra over Cast Iron Pipes and fittings if lead joint is provided I lieu of cement joint for 75 mm bore pipe complete all as specified and directed.

S&F in repair 110 mm dia PVC rainwater pipes etc complete all as specified and directed.

S&F in repair PVCbends 110mm dia complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orrissa" patttern size 580 x 440 mm white integral foot rest water closet (squatt pattern) including connection to trap and to flushing pipe, anty syphonage pipe complete all as specified and directed. Make:- Ist Quality of Hindware/Parryware/Cera

S&F in repair, PVC valveless, syphonic action type flushing cistern low level white with intel ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor complete all as specified and directed. Make:- Ist Quality of Hindware/Parryware/Cera

Material only flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

S&F in repairs CP stop cock 15mm bore of approved quality complete all as specified and directed.

S&F in repairs 15 mm dia chromium plated shower rose 125 mm size with CP arms for shower complete all as specified and directed.

S & F chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handfle screwed down, screwed for iron pipe or brass for ferrule and fixed complete all as specified and directed.

S&F in repair PVC connection 450 x 15mm dia PTMT (PVC) all as specified

S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F 20 mm Gun Metal, globe or gate valve with iron wheel head, screwed both end for iorn pipe fixed complete all as specified and directed.

S&F in repair stainless steel Kitchen sink (solo regular) Single Bowl, size 405 X460X 178 with Coupling 32/40 mm with rubber & washer including angle barcket with faster & nut and bolts and all other accessries with necessary drilling/cutting holes into brick or concrete wall etc, all as specified.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15 mm thick onf brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and directed.

Rendering 10 mm thick on concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.

Preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls complete all as specified and directed.

M&L for three coats of white washing on newly plasterd ceiling surfaces complete all as specified and directed.

Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion on surfaces of walls complete all as specified and directed.

Preparing old painted surfaces of wall and applying two coats of cement base paint on surfaces of walls complete all as specified and directed.

Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and directed.

Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of un-reinforced cement concrete above ground floor of any description and thickness complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 using integral water proofing compond for both floor and sides of wall in sunken floor (WPC shall be measured separately) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0(Using 12.50 mm graded stone aggregate) in sub base of floorings of tiles complete all as specified and directed.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 Kg of cment per Square metre all as specified and directed.

M&L Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 18mm thick white marble (table rubbed and polished) in cooking platforms etc, in CM (1:4), including pointing in white cement (1:2) using marble dust wuith admixture of pigment to match with marble shade

Dismantling /taking down of wall plaster/terrazzo cast-in -situ/tiles or any other finish incldg bedding but not backing and rubbish complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and directed.

M&L for glazed ceramic colour tiles in verticle surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Supply & Fixing Plate Rack made of stainless steel 1 mm thick for kitchen overall size 900mm X 600 mm X250mm fixed to brick wall or concrete surface with fastner 100 mm long, complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) filling and mass concerete, complete all as specified and directed

M & L for concrete interlocking coloured tiles 80 mm thick with grey cement and pigment laid dry including 25 mm thick sand cushioning over PCC bed ( PCC bed to be paid sapretely) complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundation and mass concrete/filling complete complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

M&L PCC 1:2:4 type C-1 (using 20 mm graded stone aggregate) as in drains/surface channel complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in coping and the like including weathering slightly rounded/chamfered angles with & including necessary use complete all as specified and directed.

Extra for forming fair finished channel 75 cm inner girth in cement concrete using extra cement, including moulds mitred stopped ends etc complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 complete all as specified.

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as specified and as directed. (Note : Reinforcement to be measured and paid separately).

M&L for mild steel TMT bars 10 m dia and over , cut to length bent to shape required incl necessary cranking, bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L for MS framed work of angle, tee, F.I conforming to Fe 290 Gde E-165 as in hold fasts fixed independently complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete incl fixtures and fittings suze as swithes, ceiling rose, pendant, regulator, ssockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M & L Point wiring with 1.5 Sqmm(Nominal area) PVC insulated and PVC unsheathed FRLS multi stranded copper conductor single core cable drawn through (consealed) and including PVC non metallic conduit of 20 mm dia ISI marked with complete accessories,including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick bakelite sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly ,making good surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following :- Make of Cable- Havells /policab/Finolex, Make of PVC conduit -Plaza /Kalinga/Polycab

(a) One light point controlled by one one way switch

(b) One fan point controlled by one one way switch

(c) One bell/buzzer point controlled by one push button

(d) One 3/5 pin socket outlet 5 Amp on the same board with other swithes.

(e) One 3/5 pin 5 Amps socket outlet on indepandant board.

(f) One 3/5 pin 5 Amps socket outlet indepandant but below the switch board in the vertical plane.

All as per item No. 185.00 above here in but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor green as colour for earth contineuity all as specified.

Taking down sub main wiring and S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be incl and shall not be measured separately. Earth wire shall run inside the conduit pipe (Note :- Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.) Make of Cable- HPL/Havells /policab, Make of PVC conduit - Kinjal/atul/plaza Plast/Kalinga

S&F switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed. Make: Havells / Anchor (Penta) /Legrand”

S&F switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified and directed. Make: Havells / Anchor (Penta) /Legrand”

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed. Make: Havells / Anchor (Penta) /Legrand”

S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type complete all as specified and directed. Make: Havells / Anchor (Penta) /Legrand”

S&F bell push flush type 5 Amps complete all as specified and directed. Make: Havells / Anchor (Penta) /Legrand”

S & F Bell electric AC 230 Volts single pole ding dong type complete all as specified and directed. Make: Havells / Anchor (Penta) /Legrand”

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed. Make: Havells (ROHS)cat part No . AHLHXCW000 or equivalent in Anchor (Penta) /Legrand”

S&F electronic fan regulator 230 volts, step type (5 step) socket type, hum free 100/300 watt complete all as specified and directed. Make: Anchor(Penta)/Havells(REO)/ Legrand

Supply & Fixing Angle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete with LED bulb all as specified and directed. Make: Havells(ROHS) cat part No AHLHXAW000 or equivalent in Anchor( Panta)/ Legrand”

S&F in repairs LED tube light fitting 1x20 Watt box type industrial batten type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycabonate complete all as spd and directed. Make : C&S cat part No. LTIC00120WLED/WD or equivalent in Havells/Philips

S&F in repairs security light fitting versatile pressure die-cast aluminium with high power LED 25 W as light source complete with LED 25 W 5000K including brackets made out of GI pipe light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as spd and directed. Make : C&S cat part No. LTESSE25WLED or equivalent in philips/Havells

S&F in repairs LED bulk head with PDC aluminium milky diffuser light fitting 1x12 Watt white complete with all accessories internally prewired and incl connecting up three core single wire complete all as spd and directed . Make : C&S cat part No. LTB12WLED or equivalent in Havells/Bajaj

S&F in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall complete all as specified and directed MAKE-LEGRAND/HAVELLS/C&S

S&F in repairs MCB single pole,6 to 32 Amp 240 volt B curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. MAKE-LEGRAND/HAVELLS/C&S

S&F in repairs Miniature circuit breakers ( isolater) ISI marked 240 Volt, 50 Hz, double pole 25/32 Amps, breking capacity 10 KA.MAKE-LEGRAND/HAVELLS/C&S

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit.

M&L for excavation in trenches n.exc 1.5 m width and n.exc 1.5 m in depth in any type of soil/strata and getting out complete all as specified and directed.

Returning, filling in and including spreading over, leveling, watering and well rammming in layers n.exc 25 cm thick complete all as specified and directed.

Removal of surplus spoil from excavated site to a distance n exc 50mtr complete all as specified and directed.

S&F LED lamp 12 watt.B22 complete all as specified and directed. Make : C&S/Havells

A ONE BUILDERS AND ENGINEERS

nautiyalandcompany

M/S IRFAN AHMAD CONTRACTOR

M/S. DEV ASSPOCIATES

M/S Ex Soldiers Mechanical Works