Periodical Maintenance on Kheel Bhagelu road VR-005229203 (SH Providing and Laying 30 mm bituminous concrete, profile correction,Thermoplastic paint V-shape drain in Km. 0/0 to 2/500)

Amount

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.on bituminous surface @0.25 Kg/ Per Sqm (zero point two five kilogram per square meter) as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Providing and laying 50 to 100 mm (fifty to one hundred) average compacted thickness with bitumen of grade VG-30 (VG-thirty) @3.50%(at the rate of three point five zero percentage) by weight of total mix) prepared in Batch Type Hot Mix plant of 100-120 (one hunded to one hunered twenty) TPH Capacity bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.on bituminous surface @0.25 Kg/ Per Sqm (zero point two five kilogram per square meter) as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Providing and laying 30 mm (thirty millimeter) compacted thickness with bitumen of grade VG-30 (VG-thirty) @ 5.5% (at the rate of five point five percentage) by weight of total mix) and lime filler @ 3% (three percentage) by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charg

SURESH SHARMA GOVT CONTRACTOR

PUNEET GOVT CONT