REPAIR/REPLACEMENT OF GEYSER, EXHAUST FANS, CEILING FANS AND ALLIED WORKS AT LOWER GARRISO UNDER AGE E/M GE (KH) YOL

Taking down carefully the existing aluminium/copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets, ceiling rose, fan regulators, lamp holders, call bell, bell pushes any type etc by unscrewing and taken away from site, complete and make good the disturbed surface as existing, complete all as specified and directed.

Point wiring with 1.5 sqmm (Nominal Area) FRLSH PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including concealed PVC conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc.; of suitable size including concealed MS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including continuous earth wire FRLSH PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/exhaust fan point controlled by one switch, complete all as specified and directed. Note : i)Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained. ii) Rate of cutting chases, cement plaster, white wash and making surface good as existing surface included in quoted rate. iii) Point wiring is considered for Modular Switches and sockets. Rate of Metallic Sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate. iv) Rate of modular switch and sockets will be paid seperately under relevant item.

All as per item No 2 above but for 3 pin 5 Amp socket outlet on independant board.

All as per item No 2 above but for 3 pin 5 Amp socket outlet on same board .

All as per item No 2 above but for 3 pin 15 Amp socket outlet on independant board with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLSH PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continuos earth on independent board, complete all as specified and directed.

S&F Modular Switch one way 6 Amp, one module 230 Volts, complete all as specified and directed.

S&F Modular Switch one way 16 Amp, one module 230 Volts, complete all as specified and directed.

S&F Modular socket 6 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.

S&F Modular socket 6/16 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.

M&L for providing the MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate, complete all as specified as directed.