PROVN OF APPROCH ROAD AND WIDENING OF PRESENT APPROACH ROAD AT BINNAGURI MIL STN UNDER GE (N) BINNAGURI

Amount

Schedule 'A'

Surface Excavation 30 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas n.exc 1.5 m deep and getting out in soft/ lppse soil complete all as specified

Formimg embankments including raising (or lowering) earth spreading in layers n.exc 30 cm thick watering, ramming/rolling and finishing to required size shape etc n.exc 1.5 m high from base complete all as specified and as directed.

Removing excavated material (soil) exc 250 m but n.exc 500m depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed by Engr-In-Charge.

M&L 150 mm thick Soling (or sub base) with broken boulders or quarried stone,inter stices filled,surface formed spreaded rolled and consolidated to required gradient and camber. complete all as specified and as directed.

M&L 150 mm thick WBM (Compact thick ness) in two layers with coarse aggregate of sand stone of grading 2 (63 mm to 40mm size) rolled and consolidated to required gradient and camber with 8 to 10 tonne power roller etc.. Complete all s specified and as directed.

Preparing Water bound macadam surface by brushing with wire brush for removing caked material, sweeping with brooming & finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, and applying a priming tack coat with cationic bitumen (RS-1) @ 3.50 kg/ 10sqm by mechanical sparayer etc all as spd and as directed

M & L premix bituminous macadam using paving bitumen of grade VG-30 @ 4% by weight of total mix, laid /rolled and compacted to required gradient and camber with 8 to 10 tonne power roller compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with cationic bitumen (RS-1) @ 2.50 kg/ 10sqm by mechanical sparayer over black top surfaces complete all as specified and as directed.

M&L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder content of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid with mechanical paver, finished including rolling to required gradient and camber with 10 to 12 tonne power roller to required compaction complete all as specified in the relevant clauses of SSR Part-I (2009) and as directed. (Note: Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi dense asphaltic concrete to be laid.) complete all as specified and as directed.

M&L of continuous brick edging (sub-class 'B' brick old size bricks) with width equal to the width of the brick, laid dry on end vertical bricks laid dry., complete all as specified and as directed.

S & F of dual direction road studs, cats eye of impact ABS plastic/polycarbonate studs 100x90 mm having colour (white, red, yellow) to a side provided with steel zink plated nails of dia 4mm and length 60mm for fixing to road by hammering with adhesive including taking down old one). complete as specified and as directed

M&L for 2.5mm thick painting to road surfaces as in lines, dashes, arrows, letters, zebra cross etc. on roads, pavements and the like etc with thermoplastic road marking paint. Make : STP or equivalent) @ 5 Kg/Sqm and applying glass grit @ 300 gms/Sqm over painted surfaces while the painting surfaces are hot including cleaning surfaces complete all as specified and directed. (both application shell be carried out through meachanical application by the approved applicator of manufacturer of paint)..

S&F of energy saving, eco friendly water tight solar road studs made of aluminium die cast matt finish (Sand Blasted), conforming to IS 617:1994 Designation 4520 Compressive strength 179 KN with min 125x125x20mm with shank 56.8mm long. tested as per IP 65 in accordance with ISI 12063 ;1987 Category 2 for protection against water ingress. Tested as per IEC 1215 (between -40 to +85 degree centigrage) found be working satisfactorily for 125 hrs. tested as per QM333 including taking down old one. Make: 3M/TATA BP SOLAR/STP/DARK EYE. complete all as specified and as directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed by Engr-In-Charge.

M&L for PCC in cement concrete in foundation filling and mass concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation ,and bedding and haunching of hume pipes complete all as specified and directed.

M&L for formwork to sides of concrete foundations,footings and base of columns pillars etc surface of concrete flat complete all as specified and directed

M&L for brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:4 complete as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces finished even & fair without using extra cement all complete as specified and as directed

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cemeny concrete using extra cement including forms, moulds mitred/ stopped ends etc.complete as specified and as directed

Add or deduct for each 25 mm girth or part there of over or under 30 cm ditto

M&L for PCC in cement concrete type B-1 ,1:2:4 using 20 mm graded aggregate as in coping complete all as specified and directed.

M&L 600 mm dia reinforced concrete hume pipe class NP 3 laid and jointed complete with collars complete all as specified and directed by Engr-In-Charge.

RCC Type A1 (1:1.5:3) (using 20mm graded stone aggregate) in foundations, including rafts,footings foundation beams etc. complete all as specified and directed.

RCC Type A1 (1:1.5:3) (using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-In-Charge.

All as per item above 8 but 8mm dia and over TMT bars upto and including 10mm dia in stirrups, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd & directed by Engr-In-Charge

S&F Framed work as in doors or gates of angle or other section Fe-410-W(Gde-E-250)Quality-B with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coats of red oxide primer complete all as spd & directed by Engr-in-charge.

M&L 20 mm thick Granite jet black colour (table rubbed and polished) for wall lining (veneering to wall) over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete as specified and as directed

S & F 110mm PVC (SWR) pipes for weep holes complete all as specified and directed.

M&L Broken stone or boulders for Hand packing any thickness at back of wall over weep holes etc.Complete all as specified

M&L for prepartion of newly plastered or un plastered surfaces of walls and three coat of white wash complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including removal to a distance exc 1.5Km but not exc 5 Km complete all as specified and as directed.

Dismantling of Steel poles/struts, any size/type after demolition of foundation and re-fixing of serviceable pole of any size any type where directed within five KM distance from the work site complete all as specified and directed.

Supply and erecting steel tubular swaged pole (type 410 SP - 31) , 9.0 meter overall length confirming to suitable IS complete with cast iron base plate, finial taper plug bolts, nuts and screw including painting all external exposed steel surfaces with two coats of aluminium paint over a coat of red oxide zine chrome primer and all internal surfaces & external surfaces in contract with concrete with two coats of black bituminous paint complete all as specified and as directed Make: CALCUTTA POLE/KWALITY POLE/ BANSAL METAL WORKS

Supply and fixing LED Street light luminaires 90 Watts IP 66 type with lens incl standard fittings pressure die cast aluminium housing with heat reistant toughened front glass housing with epoxy powder coated finsh and , complete with control gear box and all accessories duly prewired and connecting to junction box and testing complete all as specified and as directed.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated,FRLS screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 16 sqmm 4 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: KEI / POLYCAB/RR Kable/Havells) (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule 'A' part).

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx15cmx7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 with 40 mm graded stone aggregate infoundation filling for steel pole complete all as specified and as directed.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'. complete all as specified and as directed.

Supply and fixing 50 mm dia GI tubing light grade ISI marked laid in trenches/ laid under floor for protection of cable including all fittings such as elbow, bends, etc and short length complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate for coping / pedestal of poles including necessary form work, fair finishing to exposed surfaces by using extra cement complete all as specified and as directed.

M&L for one run of 1.5 Sqmm 2 Core (Nominal Area) PVC Sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) in existing position from pole junction box to light fitting all complete as specified and directed. Make : Plaza/MESCAB/Polycab/HAVELLS

Supply and fixing unplasticised PVC pipes of pressure rating 10kgf/cmSq of 20 mm bore and 3mm thick fixed with MS flat iron clamp of size 20X3 mm in every 1.5 meter length of pipe including dismantling of old unserviceable any size and type pipe complete all as specified and directed. Make: ISI marked.

Taking out old serviceable cable of any size carefully from trenches after disconnecting electrical connnection and relaying of serviceable cable in trenches or passing through pipe of any type/size with and including all fixing and connecting accessories such as alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and as directed Note : The excavation and earth work shall be mesured and paid separately under relevant item of Schedule.

M & L for street light bracket made out of GI pipe light grade 40 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.5m length by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer. complete as specified and as directed

Supply & fixing pole junction box (Loop IN Loop OUT) of size 250mm x 190mm x 150mm , made out of 2.00 mm CRCA sheet CPRI approved factory made, weather, dust & vermin proof with front door and suitable locking arragement including applying two coats of Powder coated paint over exposed external & internal surfaces with three phase and neutral busbar of size 20x3 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and one no SP 6 Amps ‘C’ series mounted on DIN rail including dismantling / taking out old unserviceable any type of busbar box from existing position all complete as specified and directed. (Note :- Making suitable nitch to taking out the junction box from existing position and cutting the existing pole foundation and making good disturbed surface with required PCC /Plaster work and the same shall deem to be included in the unit rate.)

Supply and Install street light Panel 3 phase with max load 6 KW having digital timer, MCB TPN 40 amps with contractor rating 32 Amp TP complete as specified and as directed . Make - Havells. Cat No - IHXTS03060

BHANU GAJMER

M/s PATEL ENGINEERING

M/S East India Traders

P .BANERJEE AND CO

S. G. CONSTRUCTION

KAMALA INDUSTRIES

M/S MAJUMDER CONSTRUCTION

M.P. SITANI AND SONS