Construction of 15 nos Non Type and Type-VI quarter at Agartala, West Tripura /SH Modification and maintenance of (14 plus 1) quarter complex at Bhallukiya Tilla under Capital Complex Sub Division No.II under Capital Complex Division during the y

Providing and fixing factory made uPVC white coloursliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 8.159.D.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Providing and fixing glazing of approved quality in aluminium /u-PVC doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid separately ) With Toughened glass panes of 8 mm thickness ( weight not less than 20 kg / sqm )

Providing and fixing in position Phenol bonded Bamboowood panelled or panelled and glazed shutter for door ,windows clerestory windows with pre - molded 30 mm thick planks in approved colours texture & finish .It shall have 10 mm wide 25 mm deep grove to fit in panels the bamboo wood shall have minimum density of 1000 Kg /cum minimum hardness 1000 Kgf .All styles and rails shall have profiled interlocking system locked in place by bamboo pins all complete as per direction of Engineer in charge (the panelling will be paid for separately )

Providing and fixing in position Phenol bonded Bamboowood panelling of 10 mm thick in 25 to 40 mm thick panelled or panelled and glazed shutter for door ,windows clerestory windows in approved colours texture and finish . The bamboo wood planks shall have minimum density of 1000 Kg /cum minimum hardness 1000 Kgf . The panels shall have profiled interlocking system locked in place with bamboo pins all complete as per direction of Engineer in charge (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)

20 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

32 mm nominal outer dia .Pipes.