Welcome maintenance to Offrs Md accn and Day to Day maintenance petty repair and repair to joinery flooring sunken floor plumbing etc of certain unit at Misa Camp area under GE S Tezpur

Amount

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each.Complete all as specified and directed.

Taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm .Complete all as specified and directed.

Taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm but n. exc 2 sqm.Complete all as specified and directed.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water.Complete all as specified and directed.

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat ), removing serviceable tiles to store and rubbish off the premesises Complete all as specified and directed.

Dismantling water tanks and removing exc 500 but n exc 2000 ltrs capacity Complete all as specified and directed.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking down and refixing of Shutters of any description exc 1 sqm but n. exc 2 sqm each in same opening with necessary hinges , screws complete all as specified and directed.

Dismantling Plain or Corrugated AC/ Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed wiith L type J type or cranked hook bolts as specified and directed

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete all as specified and as directed.

M&L Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note :- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate.

M&L Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note :- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate

M&L PCC 1:3:6 type C1 20mm grade aggregate as in filling of chowkhats hold fast or any other work or similar work complete all as specified and directed.

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side.

S/F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified and directed

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S & F 125 mm x 63 mm double rebate factory made 100 % solid wood polymer composite (WPC) lead free , termite proof , water proof , fire retardant door frame in desired colour complete all as specified and directed. (Note - minimum density 750 Kg /Cum). (Note - Contractor to submit MTC from factory)

S & F 30 mm thick moulded factory made 100 % solid wood polymer composite (WPC) lead free termite proof , water proof , fire retardentand door shutter in desired colour complete all as specified and as directed.(Note - minimum density 600 Kg /Cum ). (Note - Contractor to submit MTC from factory)

S&F in repair Prelaminated particle board 12 mm thick, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as specified & directed

S&F in repair laminated PVC kitchen cabinets of depth 300mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves of density not less than 600 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes. (Note : Only front face is to be measured)

S&Fin repair laminated PVC kitchen cabinets of depth 610mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves of density not less than 600 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes.(Note : Only front face is to be measured)

S&F Stainless steel medium weight cold rolled butt hinges 100 mm long and fixed.Complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long.Complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised.Complete all as specified and directed.

S & F Floor door stopper 14cm long of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in repairs in floor.Complete all as specified and directed.

S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate.Complete all as specified and directed.

Supply & fix radiant door bottom sealing strip guard (door seal) complete all a specified and directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F in Repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

M & L for Hacking out old broken glass (any hickness, size, quality or description) from Metal Frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as sfd and directed

S/F 4 mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty Complete all as specified and directed.

S/F 4 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty Complete all as specified and directed.

S & F 15mm dia GI water tubes medium grade with all necessary fitting all as reqd complete of and fixed in walls/floor etc.Complete all as specified and directed.

S&F 20 mm dia GI water tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors .Complete all as specified and directed.

S&F 25 mm dia GI water tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors .Complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified

S&F 750 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F 2000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) .Complete all as specified and directed.

S&F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) .Complete all as specified and directed.

S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

S&F vitrified Ceramic tiles 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set over 15mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

All as per Item No 50 abobe but on skirting/dado over 10mm thick backing coat in CM 1:4

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over 15mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

S&F for colour Glazed ceramic tiles (450x300) of 7 to 8mm thick, in dado/skirting and jointed in neat cement slurry and pointed in white or coloured cement to match set over 10mm thick backing coat in CM 1:4 all as specified and directed.

M&L for heavy duty non skid coloured digital printed floor tiles of size 300 mmX300 mm ,8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 complete all as specified and directed.

M & L for machine cut kota stone on flooring/staircase 18-20mm thick set including over 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as specified and directed.

M & L for machine cut kota stone on skirting 18-20mm thick set including over10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as specified and directed.

M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like icluding over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Taking down existing damaged IWC/EWC alongwith complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :-(i) 15mm thick plastering in CM (1:3) with WPC mixed @2% by weight at all around and base of sunken floor with proper slope.(ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive.(iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm.(iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or padestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete (1:5:10) type E1 using 40 mm graded aggregate complete all as specified and directed(v) 40 mm thick PCC flooring in cement concrete (1:2:4) type B-1 using 20 mm Graded aggregate complete all as specified and directed

M&L for taking down of existing Roof treatment from roof and fence and covering surface of old concrete roof by picking , sweeping clena and washing down with water remove dust, etc and applying roof treatement with the following specifications: (a) Rendering 15mm th in cm (1:4) fixed with water proofing compound as per manufacturers instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plaster surfaces for 7 days by ponding water over the roof (leveling coure) (b) Applying evenly one coat of cold bituminous primer conforming to IS- 3384-1088@ 0.30 litre per sqm on th cleaned plastered surfaces (c) Applying layer of APP based polymeric membrane 3mm th (minimum) weighing 3.50 kg per sqm (reinforced with polyster non woven fabric weighing not less than 160 gms per sqm by torch application . The overlap shall not less than 100mm onn the reverse direction and 75mm longitudinal direction and sealing overlaps. (d) Applying evenly one coat of aluminium paint of 0.10 ltr sqm over APP based polymeric membrane. Please Note:- W.P.T. to be done from authorised applicator and necessary MTC to be submitted prior to execution of work to Engineer-in charge.

S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling and PVC Waste pipe fixed.complete all as specified and directed.

S&F in repair Vitreous China EWC wash down water closet (padestal pattern, white) including PVC Sheet cover and civil work as required.complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2 complete all as specified & directed

S & F Vitreous China wash down water closet pan (one piece), white connection to trap, and to flushing pipe, anti-syphonic pipe, etc complete including making good of floor (Excluding fixing bolts, flushing cistern and flush pipe) complete all as sfd and directed.

S & F in repair PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets.complete all as specified and directed.

S &F in repair brass CP shower rose swivel type fix to iron pipe all as directed.

S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed .

M&L replacemnet of damage concealed stop cock with demolition or existing tile area and replacement the connected stope cock with required water pipe and making good with PCC (1:3:6) cement concrete and fixing the tile with maitching the existing tile over 10mm thick backing coat of plaster in CM (1:4) (Maximum area is approx 0.54 cum) complete all as specified and as directed by Engr-in-charge

S & F in repair 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed .

S&F Two way bib cock with flange brass chromium plated fancy type screwed for 15 mm bore etc.as in repair complete all as specified and as directed.

Dismentling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 110mm bore.

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to fioors ,75 mm bore .complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm bore.

S&F in repair PVC (SWR) bends any radius 110mm bore with access door.

S& F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete fixed.

S&F in repair CP fancy pillar cock / Swan neck type 15mm dia complete all as sfd and directed.

M & L 10 mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement.complete all as specified and directed.

M&L rendering 20 mm (10mm + 10mm) thick cement plaster in two layer on brick wall in CM 1:4 mixed with WPC @ 2% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately)

Supply only integral water proofing compound.

M&L 5mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement.

M&L Applying a layer of sika latex or equivalent make (liquid) mixed with cement slurry (as per manufactures instructions) for bonding of existing and new concrete complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M/L two coats of synthetic enameled painting over 1 coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth complete all as specified and directed.

M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

M&L two coats of cement base paint over a coat of primer including preparation of new surfaces complete all as sfd and directed.

M&L preparation of newely plaster surfaces and appplying two coats of weather coat (Apex) over one primer coat of damp shealth over a coat of 1 mm thick wall care putty by smart painting method to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth primer by smart painting method to old plastered walls as per manufacturer instrcution including properly fillings the cracks with white cement/putty etc complete all as specified and directed.

M&L Applying two coats of acrylic emulsion distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer by smart painting method including preparation of newly platsered wall all as specefied and directed.

M&L Applying one coat of acrylic emulsion distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old surface of wall by washing/rubbing down and scrapping old loose material, smoke, soot, moulds,moss and efflorence etc including crack filling and stopping the rough surface/nail holes with white cement/ putty and patch putty by smart painting method complete all as specified and directed.(Note- Contractor to submit warranty from manufacturer)

M&L complete removal of existing treatment and appplying two coat of acrylic emulsuin distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

Material and Labour for applying two coats of plastic emulsion paint by smart painting method including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed complete all as specified and directed by Engr-in charge .

M&L for preparing new plastered surface of wall and applying three coats of white wash incl cornice complete all as specified and directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash all as specified and directed. preparation of new surfaces.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms).

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes.

S&F in repair Tubular towel rail 20 mm dia with brass chromium plated complete all as sfd and directed.

S&F in repair Tubular Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)complete all as sfd and directed.

S & F in repair CP Brass health faucet with 1.00 mtr tube and hook complete all as specified and directed.

S&F in repair mild steel CP jet spray with 1.0 mtr long CP pipe and CP connector all as specified.

S & F CP Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws

supply and fix toilet paper holder of vitrious china fixed to wall with chromium plated cp brass screw in repair complete all as specified and directed

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.

Supply and fix as in repair, PVC cabinet looking mirror with inner shelves for holding bath/saving kit of size 300x450mm complete all as specified and directed

S&F in repairs 20 mm dia decorative curtain rods of MS conduit with polymer linning etc. with decorative side dome and brackets complete all as specified and directed.

M & L for Door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and directed.

S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F in repairs 32 mm Waste coupling of brass chromium plated (half or full threaded) complete all as specified and directed.

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as directed.

Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in Repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix Plate rack made out of Stainless steel sheet 0.5 thick overall size 900(H)x900(W)x300(D) including brackets or fitted with existing shelves in repair complete all as specified and directed

S & F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S; type for monkey protection etc complete all as specified and directed

S & F in Repair 15 mm CP Brass wall mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and directed

S&F in Repair 15mm dia Basin Mixer cast copper alloy, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks complete all as specified and as directed.

S&F in Repair 300mm long brass sliding door bolt with with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F in Repair Mortice lock of brass of four levers ,vertical type, size 100 mm, complete all as specified and as directed

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified

S/F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete.

S & F Powder coated aluminium grill of design DG-104 pattern made out of 10 mm dia rod fixed withand including stranded aluminium frame of F section of size 23.40 x 15.3 x 1.4 mm thick all as per manufacture instructions complete all asspecified and directed

M&L chequred cement concrete tiles 25cm X 25cm X 25mm thick, with grey cement and pigments, set, jointed and pointed bedding layer of mortar 15 mm thick in cement mortar 1:6 in neat cement slurry in floors complete all as specified and directed.

M&L PCC 1:3:6 (nominal mix) Type C-2 using 40mm size stone aggregate finished and smooth without using extra cements as in base complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as ceiling roses,pendants etc. and making good disturbed surfaces of walls, floors etc all as specified and directed.

M & L for point wiring for one light/fan/bell point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through and including PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings including such as modular switches, sockets and regulators with including Modular PVC flush box and Modular White Cover plate with frame all as specified and directed including taking down old unserviceable point wiring.complete all as specified and as directed.

All as per Item No 132 above but one socket outlet 5 pin 6 amps on independent board.

All as per Item No 132 above but one 5 amps socket outlet on same board with other switch.

Material and labour for point wiring for one 15 Amp indp Socket with 2.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn with PVC casing/caping with all accessories incl 2.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly, complete all as specified and directed.

Supply and fixing in repair Modular switch one way 6 Amp complete all as specified.

Supply and fixing in repair Modular switch one way 16 Amp complete all as specified.

Supply and fixing in repair modular switch 2 way 10 Amp complete all as specified.

Supply and fixing in repair modular bell push 10 Amp complete all as specified.

Supply and fixing in repair call bell, AC 230 volts, single pole complete all as specified.

Supply and fixing in repair modular socket outlet 2 in 1, 3 pin 6 A complete all as specified.

Supply and fixing in repair Modular socket outlet 6/16 Amps complete all as specified.

Supply and fixing in repair Modular Fan stepped regulator, 120 W, 2 Module complete all as specified.

Supply and fixing in repair angular lamp holder, PVC/Polycarbonate type all as specified and directed.

Supply and fixing in repair ceiling rose polycarbonate isolated body 3 ways terminals.

Supply and fixing in repair modular white cover plate with frame 2 modules complete all as specified and as directed.

Supply and fixing in repair modular white cover plate with frame 3 modules complete all as specified and as directed.

Supply and fixing in repair modular white cover plate with frame 4 modules complete all as specified and as directed.

Supply and fixing in repair modular white cover plate with frame 6 modules complete all as specified and as directed.

Supply and fixing in repair modular white cover plate with frame 8 modules complete all as specified and as directed.

Supply and fixing in repair modular white cover plate with frame 12 modules complete all as specified and as directed.

Supplying and fixing in repair two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing and caping/conduit (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note : Two run of 4 sqmm wire with one run of 4 sqmm and one run of casing capaing / conduit pipe shall be measured against one unit.complete all as specified and as directed.

Supplying and fixing in repair two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC casing and caping / conduit (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note : Two run of 6 sqmm wire with one run of 6 sqmm and one run of casing capaing / conduit pipe shall be measured against one unit.complete all as specified and as directed.

Supply and fixed in repair18 W LED light fitting wall mounted batten 4'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixed in repair 09 W LED light fitting wall mounted batten 2'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 09 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixed in repair security light fittings minimum 30 watts, minimumm lumen output 110 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete including 25mm dia light grade GI bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

Supply and fixed in repair 12 W Surface panel mounted round LED downlight, aesthetically designed aluminium die-cast enclousers, with seperate replaceable constant current driver 12 watts, including necessary connection complete all as specified and directed.

Supply & fix in replacement of LED bulb 10 watt 6500 k complete all as specified and as directed.

Supply and fixing in repair LED 9 W decorative wall light made up of high grade engineering plastic material suitable for LED 9W complete as per manufacturer's instructions all as specified and directed.

Taking down and Refixing at site ceiling fans 1200/1400 mm sweep including opening of fans and cutting down burnt winding, and rewinding with new super enameled copper winding of same gauge as per existing winding, varnishing, drying, replacement of ball bearing, replacement of condenser etc and re-assembling the same including necessary transportation etc complete including taking down all as specified and directed.

S & F of 3.15 Mfd Capacitor for Fan including taking out old unservicable one complete all as specified and directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 20 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

BCL (BID ID -3082930)

M/S Jiban Krishan Das and Co (BID ID -3072737)

D G Corporation (BID ID -3081495)

M/S Manjit Singh (BID ID -3081870)