GSB ROAD

Dismantling of existing structures like culverts, bridges, retaining walls and other. structure comprising of masonry, cement concrete wood work, steel work, including 1 T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviciable material with all liftts and lead of 1000M as per Technical Specification clause MORTH Cement Concrete M15/M20

Earthwork in excavation for Road way as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and 2 bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH

Construction of granular sub-base by providing well graded material/ close graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting 3 with smooth wheel roller 80-100 kN/ Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH for Grading - III material

Carting away the surplus excavated earth from the work site with a lead of 4 3.00 Km beyond initial lead including loading, unloading, conveyance and stacking charges etc., complete.

Bailing out water from the trenches with oil engine driven pump sets, including 5 hire charges, fuel charges and wages for Driver and Helper etc. complete as per directions of the departmental authorities

Collection, supply and filling of Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve including cost and conveyance of all materials, labour charges, watering and compacting etc., complete as per ss under bed concrete

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically 7 mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Drain bed

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically 8 mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Drain wall

Plastering with CM (1:3), 12 mm thick including Cost & Conveyance of all materials and labour charges for mixing and curing etc., Complete as per S.S

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically 10 mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Culvert bed

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically 11 mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Culvert walls

Vibrated cement concrete M 30 grade design mix using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, ting, curing etc., including all other incidental and operational charges of all T&P etc.. complete for finished item of work as per MoRT&H specification and as directed by the Engineer-in-Charge for C.C Pavement. For culvert slab

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-13 splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No. 126)

Vibrated cement concrete M 30 grade design mix using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, ting, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification and as directed by the Engineer-in-Charge for C.C Approaches.

Manufacture as per BIS: 12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes. H.D.-20 with 500mm dia. Clear opening