Special repair to Principal Office in Dr R.P.G.M.C. Tanda Distt Kangra (HP) (SH-Balance work of dismantling floor tiles repair of plaster, P/L floor tiles, Aluminium work, P/L Granite, panting and distempering in ground floor and first floor).

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material upto any lead as per direction of Engineer - in - charge un-reinforced cement concrete complete and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Repair to plaster with cement mortar 1:3 (One cement : Three sand) in patches of 2.50 sqm (Two decimal five zero) square metres upto any thickness including cutting the patches in proper shape and re-plastering the surfacing to the wall including disposal of rubbish to the dumping ground complete and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) complete and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand complete and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing anodised/colour cotaed aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames. All complete as per architectural drawings and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised/colour coated aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete as per architectural drawings and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 300x10mm (Three hundred into ten millimetres) aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as per direction Engineer-In-charge including carriage of material within all leads, lifts and other incidentals.

200x10mm size (Two hundred into Ten millimetres) nominal size

150x10 mm(One hundred fifty into Ten milimetres) nominal size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

125 mm (One hundred Twenty Five millimetres) nominal size

100 mm(One hundred milimetres) nominal size

75 mm(Seventy Five milimetres ) nominal size

Providing and fixing chromium plated brass sliding door bolts with nuts and screws etc. complete. as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 150mm (One hundred fifty millimetres) M.S. double acting spring hinges of approved brand with necessary screws etc. complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

150 mm (One hundred Fifty millimetres) nominal size

125 mm (One hundred Twenty Five millimetres) nominal size

100 mm(One hundred milimetres) nominal size

P/F 12mm mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing 4.4 mm (Four point four millimetres) thick Plain Glass panes with putty and nails including removal of broken glass panes wherever necessary as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing 5.5 mm (Five point five millimetres) thick Plain Glass panes with putty and nails including removal of broken glass panes wherever necessary as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 16 to 20mm (Sixteen to twenty milimetres) thick granite stone in flooring / staircase etc; 20mm (Twenty millimetres) (average ) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including moulding single/double layer rubbing and polishing complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing acid and/or alkali resistant tiles of approved make Kajaria/Orient bell/AGL simpolo/Nitco etc. having thickness as approved by the manufacture of size 300x300mm (Three hundred into three hundred millimetres) and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant floor tile complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing acid and/or alkali resistant tiles double charged of approved make Kajaria/Orient bell/AGL simpolo/Nitco etc. having thickness as approved by the manufacture of size 600x600mm (Six hundred into six hundred millimetres) and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant floor tile complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing acid and/or alkali resistant full body vetrified tiles of approved make Kajaria/Orient bell/AGL simpolo/Nitco etc. having thickness as approved by the manufacture of size 600x600mm into 200x1200mm (Shree hundred into six hundred millimetres into two hundred into one thousand two hundred millimetres) and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant floor tile complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing acid/alkali resistant tiles of make Kajaria/Orient bell/AGL simpolo/Nitco etc. having thickness as approved by the manufacture of size 300x600mm/300x450mm (Three hundred into six hundred millimeters/three hundred into four hundred fifty millimeters) dado/skirting / wall on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing acid/alkali resistant tiles of make Kajaria/Orient bell/AGL simpolo/Nitco etc. having thickness wooden shade as approved by the manufacture of size 200x1200mm (Two hundred into one thousand two hundred millimetres) dado/skirting / wall on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 6mm (Six millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per approved drawing, design and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Removing dry oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete complete, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. complete, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification One or more coats on old work complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work complete as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work complete as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses, tubular and framed work, including cutting, hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels, angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing ridges or hips 60 cm(Sixty centimeters) over all in 0.63mm(Zero decimal six three milimetres) thick plain galvanized iron G.I. sheet fixed with galvanized iron J or L hooks, bolts and nuts 8mm(Eight milimetres) diameters G.I. limpet and bitumen washers as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing valleys 90cm (Ninety centimeters) over all in 0.63mm (Zero decimal six three milimetres) thick plain galvanised iron G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8mm(Eight milimetres) diameters G.I. limpet and bitumen washers as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing edge moulding to single/double on marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite/marble work complete with all accesoriees as required as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying on wall face PVC (D-Plast) rain water working pressure not less than 4.50 kg/sqm (Four decimal Five Zero kilograms per square metre)including filling the joints with approved adhesive complete and as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

75 mm (Seventy five millmetres) dia

110mm (One hundred ten millmetres) dia

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) Cera or its equivalent approved quality tube fitting and clamps including making good the wall, ceiling and floor as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore TATA, JINDAL

20mm (Twenty milimetres) nominal bore TATA, JINDAL

25mm (Twenty five milimetres) nominal bore TATA, JINDAL

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe Cera or its equivalent in cement mortar 1:1 (One cement : One sand) Angle Indian Universal closet (Seat and over to be measured and paid for separately as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing plastic seat (Solid/Hollow type) and cover Cera or its equivalent for wash down water closet with C.P. Brass hinges and rubber buffers complete and complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing (vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white Cera or its equivalent including cutting holes and making good the same but excluding fittings and as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

550x400mm (Five hundred fifty five into four hundred millimetres)

400x400mm (Four hundred into four hundred millimetres)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm dia C.P. brass waste pipe for wash basin or sink:- 40 mm dia , as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diametres M.I. Union for wash basin or sink ISI make complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into Four hundred fifty milimetres) size bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing toilet paper holder C.P. brass as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass. (Heavy duty makes) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws as directed by the Engineer- in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera or its equivalent as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera or its equivalent complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve without nuts and pipe Cera or its equivalent complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm nominal bore PVC connection with brass unions. 300/450mm length:- complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing water closet flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern including entire carriage of materials within all leads, lifts and other incidentals.

. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing C.P. jet spray of approved quality and colour with one metre tube as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 1000 litres (One thousand litres) net capacity tank PVC SINTEX having capacity water storage tank of ISI : 9001 : 2008 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level, complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing G.I. TEES EQUAL 25mm dia:- as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing C.P. pillar cock of approved 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) diametres C.P brass grating for gully floor or Nahni trap ISI make 125 mm nominal dia with 25 mm waste hole as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) size C.P. Brass Towel rail Cera or its equivalent complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

VENYA CONSTRUCTIONS AND SUPPLIER

Abhishek