Construction of New Rest Room cum Toilet Block for IBP D.C Workers in KMML

Amount

Demolition of Existing CC

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Removing of Existing Soling

Demolishing stone rubble Soling manually / by mechanical means and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:

Earth Work

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Available earth filling

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Filling Red earth

Supplying & filling with red earth, spreading in layers, leveling the top at site and consolidation by plate compactor, ramming etc complete as per the instruction of Engineer in charge. Measurement will be taken for the compacted volume only.

Anti termite treatment

Providing and injecting with approved quality chemical emulsion as per IS 6313-1981 part 2 of pre-constructional anti termite treatment and creating a chemical barrier under the all around column pits, foundation, wall trenches, plinth filling, and floor as per the instructions of the engineer.

Random rubble masonry

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:<br>Cement mortar 1:6 (1 cement : 6 coarse sand). Cement shall be supplied by KMML.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size).Cement supplied by company.

Centering and shuttering

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Steel Reinforcement

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level<br>Thermo - Mechanically Treated bars of grade Fe-500D or more (TMT steel bars shall be supplied by company).

RCC for Plinth beam

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:<br>1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size<br>Required cement shall be supplied by KMML

Bituminous Painting

Painting with black bituminous paint of approved brand and manufacture on wet or patchy portion of plastered surfaces:<br>One coat

Solid block masonry 20Cm thick

Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete.(Cement supplied by KMML)

Solid block masonry 10Cm Thick

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete(The required opc cement for masonry work shall be supplied by kmml at our store)

Steel Reinforcement above plinth

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.<br>Thermo - Mechanically Treated bars of grade Fe-500D or more (TMT steel bars shall be supplied by company)

Centering and Shuttering for Sunshade

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

Centering and Shuttering for roof Slab

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

RCC for roof Slab,lintels,beams

Reinforced cement concrete work in beams, slabs, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).Cement and TMT bars supplied by KMML

6 mm cement plaster

6 mm cement plaster of mix:<br>1:3 ( 1 cement : 3 fine sand) The required cement will be supplied by the company

Plastering with 12 mm cement plaster

Plastering with 12 mm cement plaster of mix:<br>1:4 ( 1 cement : 4 fine sand)(The required cement shall<br>be supplied by KMML at our store)

M.S. Grills

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved epoxy primer and 2 coats of epoxy paint all complete.<br>Fixed to steel windows by welding

Wood frame

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

wood shutter

50.9.2.1 : Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge. using Anjili/ Jack wood/ Mahagony

Wooden paneling for door shutter

50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood/Mahagony

single molded fiber door

Providing and fixing single molded fiber door with frame and all fittings like latch, tower bolt, hinges etc. maximum size up to 2 sqm for toilet doors.

Providing and fixing mortise lock set of godrej or equivalent approved by Engineer in charge to the wooden door shutter (handle size minimum 8inch)

Tower Bolt

Providing and fixing bright finished Stainless Steel(SS) tower bolts (barrel type) with necessary screws etc. complete:<br>200x10 mm

Vitrified floor tile double charged 1.2x0.60 m size

Supply and laying first quality vitrified tiles of size 1200 x 600mm of approved make like Kajaria/Cera/johnson/somany/NITCO or other approved brand in approved shade and pattern for floors as per architectural design laid on 20mm thick cement mortar 1:4 (1 cement : 4 course sand ) with tile spacer and jointing with with epoxy joint fillers minimum of 5mm thick of matching shades of approved brand, complete.<br>(The required OPC cement shall be supplied by KMML at our store).

Vitrified skirting tile

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with epoxy joint fillers etc. complete.<br>Size of Tile 1200x600 mm( Cement shall be supplied by KMML)

Ceramic Floor tile

Providing and fixing premium quality ceramic digital anti-skid floor tiles of make<br>Kajaria-Alexis Decor/Nitco/Simpolo/Cera or approved brand conforming to IS : 15622 (thickness to be<br>specified by the manufacturer), in all colours, shades of size matching to wall tiles or as approved by<br>Engineer -in-Charge, over 12 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) with tile spacers<br>and jointing with epoxy joint fillers with pigment of matching shade of approved brand in approved pattern<br>with two or more desgin tiles complete. (The required OPC Cement shall be supplied by KMML at our store)<br>Details of cost for 1 sqm<br>MATERIAL:<br>Glazed Ceramic floor tiles 300x300 mm size = 1.00 sqm<br>Add for wastage & breakage @ 2.5 % =0.025 sqm<br>Total = 1.025 sqm

Ceramic wall tile

Providing and fixing premium quality ceramic digital wall tiles of approved brands like<br>Kajaria- Alexis Decor/Nitco/Simpolo conforming to IS : 15622 (thickness to be specified by the<br>manufacturer), in all colours, shades of size 30x60 cms or nearest as approved by Engineer -in-Charge, over<br>12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) with tile spacers and jointing with epoxy<br>joint fillers with pigment of matching shade of approved brand in approved pattern with two or more desgin<br>tiles complete. (The required OPC Cement shall be supplied by KMML at our store)<br>Details of cost for 1 sqm<br>MATERIAL:<br>Ceramic Glazed tiles = 1.00 sqm<br>Add for wastage & breakage @ 2.5 %<br>0.025 sqm<br>Total = 1.025 sqm

White vitreous china flat back urinal separation

Providing and fixing white vitreous china flat back urinal divider.

European Closet

17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Indian Closet

17.13.2 : Providing and fixing white vitreous china water closet squatting pan ( Indian type):Orissa pattern W.C. pan of size 580x440 mm

Health Fauset

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

Angle Cock

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Wash Basin

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:;White Vitreous China Flat back wash basin size 510x400mm or nearest size with single 15 mm C.P.brass pillar taps

Long Body CP tap

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Stop cock

18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

CP Shower

Providing and fixing C.P. brass shower rose with arm of 15 or 20 mm inlet:<br>100 mm diameter

Urinal

Providing and fixing approved model white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively with all fixtures including Flush pipe with union spreaders and clamps all in C.P. Brass, waste coupling and semi rigid waste hose etc, all complete.

Pipe 20 mm concealed

50.18.8.2.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2

Pipe 40 mm concealed

50.18.8.5.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2

Pipe 50 mm concealed

50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

Pipe 110 mm concealed

50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

Pipe 20 mm External work-exposed on wall

50.18.9.12.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12 Kgf/cm2 - External work - Exposed on wall

Pipe 32 mm External work-exposed on wall

50.18.9.14.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall

Pipe 40 mm External work-exposed on wall

50.18.9.15.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall

Pipe 50 mm External work-exposed on wall

50.18.9.16.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall

Pipe 63 mm External work-exposed on wall

50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

Pipe 110 mm External work-exposed on wall

50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

Pipe 32 mm Trenching

50.18.9.4.2 : Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2

Pipe 63 mm Trenching

50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

Pipe 110 mm Trenching

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

63 mm dia Elbow

50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

63 mm dia 45 degree elbow

50.18.9.20.2 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

63 mm dia bend

50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

63x63x63 mm dia Tee

50.18.9.20.5 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

63x63x63 mm dia door Tee

50.18.9.20.6 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee

63 mm dia vent cowl

50.18.9.20.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

63x50 mm dia reducer

50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

110 mm dia Elbow

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

110 mm dia 45 degree elbow

50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

110 mm dia bend

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

110x110x110 mm dia Tee

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

110x110x110 mm dia Door Tee

50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

110x63 mm dia reducer

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110x63 mm dia Reducer

110 mm Yee joint

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Yee

110 mm offset

50.18.9.22.9 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia offset

Floor trap

Providing and fixing PVC moulded Floor trap for sanitary pipelines, including jointing PVC pipes with PVC solvent cement and filling gaps with cement grout- Floor trap 4 way/3 way

CP gratings

Providing and fixing CP grating of approved quality.<br>Rectangular type with openable circular lid<br>150 mm nominal size square 100 mm diameter of the inner hinged round grating

Mirror of Superior glass

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with rubber sheet pasted on rear with hooks/holes, C.P. brass screws and washers complete.

Stainless steel soap dish

50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

CP Towel rod

50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

RCC Precast septic tank

Supplying and installing ready made RCC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 35 to 50 flush capacity

Soak pit

Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. (Cement required for fixing pipes etc shall be supplied by the company)

PVC Water tank

Providing and fixing rectangular/Circular high density polyethylene water storageof tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes ;for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for ;tank shall be paid separately.

ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

GM ball valve 25 MM

Providing and fixing GM ball valve of approved quality (screwed end) :<br>25 mm nominal bore

GM valve 40 mm

Providing and fixing GM ball valve of approved quality (screwed end) 40mm nominal bore.

Wall Primer

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

Primer for wood work

13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood)

Synthetic enamel paint

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Horizontal DB

Supply of 1 phase 240v distribution board in sheet steel enclosure with double door and detachable gland plate,complete with cable entry adaptor box, tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs etc.as required, without MCCB's/MCBs <br>For concealed flush mounting Make :Standard/havells/ABB/Siemens/hager/Schneider40A,1 phase 12 way Horizontal DB

Supply of double pole RCCB/MCB of the following capacity

Supply of double pole RCCB/MCB of the following capacity ;40 A DP Isolator;(Make:Standard/Havells/ABB/Siemens/Hager/Schneider)

Supply of double pole RCCB/MCB of the following capacity

Supply of double pole RCCB/MCB of the following capacity ;40 A,100 mA DP RCCB (Make:Standard/Havells/ABB/Siemens/Hager/Schneider)

Supply of double pole RCCB/MCB of the following capacity

Supply of double pole RCCB/MCB of the following capacity ;6A SP MCB 10kA ;(Make:Standard/Havells/ABB/Siemens/Hager/Schneider)

Supply of double pole RCCB/MCB of the following capacity

Supply of double pole RCCB/MCB of the following capacity;16A SP MCB 10kA ;(Make:Standard/Havells/ABB/Siemens/Hager/Schneider)

Supply of LED tube Light

Supply of LED tube light,20 W(Approximate),230V, 50 Hz AC supply,surface mounting,IP:20 or above;Warranty:Full warranty of 1 year or above

Supply of LED bulb

Supply of LED bulb,9W,230V,50 Hz 230V, 50 Hz AC supply, Pin type ,IP:20 or above<br>Warranty:Full warranty of 1 year or above

Supply of ceiling fan

Supply of ceiling fan 1200mm sweep. Make:Orient/usha/crompton/Bajaj/Khaithan

Supply of electric calling bell

Supply of Electric calling bell,230V,50Hz ;Make:Anchor/L&T/Legrand

Supply of Exhaust fan

Supply of Exhaust fan 300mm Sweep ;Make:Orient/Usha/Crompton /Bajaj/Khaithan/Almonard

Supply of 6A switch

Supply of 6A switch for 1 module, modular ;(Make: Legrand, Anchor, ABB, Honeywell)

Supply of 6A twin Switch

Supply of 6A twin switch for 1 module, modular ;Make;Legrand,Anchor,Anchor,ABB,Honeywell

Supply of 16A Switch

Supply of 16A switch for 1 module modular ;(Make: Legrand, Anchor, ABB, Honeywell)

Supply of 5-13A socket

Supply of 5-13A multi standard /international socket for 2 module , modular ;(Make: Legrand, Anchor, ABB, Honeywell)

Supply of 16A socket

Supply of 16A Socket for 2 module, modular ;(Make: Legrand, Anchor, ABB, Honeywell)

Supply of angle batten

Supply of angle batten fancy type ;(Make: Legrand, Anchor, ABB, Honeywell)

Supply of Fan step regulator

Supply of Fan step regulator for 2 module, modular(make: Legrand, Anchor, ABB, Honeywell)

Supply of concealed GI box

Supply of concealed GI box, Face plate and frame for 2 module, modular Make: Legrand, Anchor, ABB, Honeywell

Supply of concealed GI box

Supply of concealed GI box, face plate and frame for 3 module, modular ;Make: Legrand, Anchor, ABB, Honeywell

Supply of concealed GI box

Supply of Concealed GI box, face plate and frame for 6 module, modular. Make: Legrand, Anchor, ABB, Honeywell

Supply of concealed GI box

Supply of Concealed GI box, face plate and frame for 9 module, modular;Make: Legrand, Anchor, ABB, Honeywell

Modular type wiring

Supply of materials required for copper point wiring for lights, fans in PVC medium gauge conduit with modular type switch-using 1.5 sq.mm PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required to complete.(Excluding supply of Fans, Exhaust fans, Lights, Concealed mounting boxes, Plates and Frames, Switches, Sockets and Fan regulators)(Approximate 5 meters/point)

Modular type wiring

Supply of materials required for copper twin point wiring for lights, fans in PVC medium gauge conduit with modular type switch-using 1.5 sq.mm PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required to complete.(Excluding supply of Fans, Exhaust fans, Lights, Concealed mounting boxes, Plates and Frames, Switches, Sockets and Fan regulators)(Approximate 5 meters/point)

Modular type wiring

Supply of materials required for copper point wiring for lights, fans in PVC medium gauge conduit with modular type switch-using 1.5 sq.mm PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required to complete.(Excluding supply of Fans, Exhaust fans, Lights, Concealed mounting boxes, Plates and Frames, Switches, Sockets and Fan regulators);above for more than 5 meters

Modular type wiring

Supply of materials required for copper circuit wiring in PVC conduit-with 1.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit along with 1 no. 2.5 sq.mm. PVC insulated copper wire for loop earthing as required.

Modular type wiring

Supply of materials required for copper circuit wiring in PVC conduit-with 2.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit along with 1 no. 2.5 sq.mm. PVC insulated copper wire for loop earthing as required.

Installation of LED tube light

Installation, testing and commissioning of LED tube lights complete with all accessories etc. including connection with 1.5 sq.mm PVC insulated copper conductor single core cable etc. as required

Installation of LED bulbs

Installation, testing and commissioning of LED bulbs complete with all accessories etc

Installation of ceiling fan

Installation of ceiling fans, making connections, testing and commissioning, etc. with 1.5 sq.mm PVC insulated copper conductor single core cable etc.as required.

Installation of exhaust fan

Installation of exhaust fan upto 300 mm sweep in the existing opening including modifying the holes to suit the size of the above fan making good the damage, connections, testing and commissioning etc. with 1.5 sq.mm PVC insulated copper conductor three core cable etc. as required.

Installation of calling bell

Installation of calling bell making connections, testing and commissioning etc. with 1.5 sq.mm. PVC insulated copper conductor single core cable etc. as required.

Fixing of 6/5-13/16/25 amps modular type sockets

Fixing of 6/5-13/16/25 amps modular type sockets, switches, bell switches, fan step regulators, with inter connections etc. as required.

Copper point wiring

Copper point wiring in PVC medium gauge conduit with modular type switch<br>Wiring for light point/fan point/exhaust fan point /calling bell/socket point using 1.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required with modular type switch with non-metallic inner and outer cover (inner and outer plate) in suitable metal boxes etc. as required to complete.

Copper twin point wiring

Copper twin point wiring in PVC medium gauge conduit with modular type switch<br>Wiring for light point/fan point/exhaust fan point /calling bell/socket point using 1.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required with modular type switch with non-metallic inner and outer cover (inner and outer plate) in suitable metal boxes etc. as required to complete.

Copper point wiring more than 5 meters

Copper point wiring in PVC medium gauge conduit with modular type switch<br>Wiring for light point/fan point/exhaust fan point /calling bell/socket point using 1.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required with modular type switch with non-metallic inner and outer cover (inner and outer plate) in suitable metal boxes etc. as required to complete.for more than 5 meters

Copper circuit wiring 1.5 sq.mm

Copper circuit wiring in PVC conduit-Circuit wiring with 1.5 sq.mm PVC insulated, copper conductor, stranded cable in recessed PVC conduit along with 1 no 1.5 sq.mm PVC insulated copper wire for loop earthing as required.

Copper circuit wiring 2.5 sq.mm

Copper circuit wiring in PVC conduit-Circuit wiring with 2.5 sq.mm PVC insulated, copper conductor, stranded cable in recessed PVC conduit along with 1 no 2.5 sq.mm PVC insulated copper wire for loop earthing as required.

Installation of DB

Installation, Testing and commissioning (concealed flush mounting) Distribution board in sheet steel enclosure with double door and detachable gland plate , complete with cable entry adaptor box, tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs etc. as required40 A,1phase 12 way Horizontal DB

Fixing isolator

Fixing single pole/three pole/four pole RCCB,MCBs in the existing enclosure and giving connections as required ;40A DP Isolator

Fixing RCCB

Fixing single pole/three pole/four pole RCCB,MCBs in the existing enclosure and giving connections as required 40A, 100 mA DP RCCB

Fixing 6A SP MCB

Fixing single pole/three pole/four pole RCCB,MCBs in the existing enclosure and giving connections as required ;6A, SP MCB 10kA

Fixing 16A SP MCB

Fixing single pole/three pole/four pole RCCB,MCBs in the existing enclosure and giving connections as required 16A, SP MCB 10kA

Laying,dressing and clamping of cables

Laying, dressing and clamping of following cables through existing trays/structures/racks/columns etc to the new DB. Cable shall be supplied by KMML. All other materials required for clamping are under the scope of contractor.;4X10 sq.mm. AYFY/XLPE cable

Glanding and termination at DB's

Glanding and termination at DB's side of PVC cable using DC glands/ lugs including supply of cable glands, lugs, aluminum crimping sockets, nuts bolts etc. required for this work. Gland earthing as per standards shall be done by the contractor.;4X 10 sq.mm AYFY/XLPE cable

Preparation of all electrical drawings

Preparation of all electrical drawings and obtaining statutory approval from electrical inspectorate for the new DBs

Bidder Name

Sooraj P (Sivani Associates)