Supply of furniture for Construction of Interns Hostel for 125 interns at Medical College Kota

Amount

IRON COTS Overall size : 1892 L x 950 W x 460 H (mm ) Material description :- a ) I.eg frame tube 50.8x25.4x1.60 (mm) (16 swg) ERW rectangular tube and side frame thickness 50.8x50.8x1.6 mm b) Four number of support members 25x25mmx1.6mm rhick ERW square tube. C ) Angle support of 25.0x25.0x3.0 (mm) on head and leg side and the two long sides. d) 19mm thick (IS 710) water proof plywood (century, lit ply, green or equivalent etc. ) with a protective layer of melamine on top and below the plywood with IS signs and company mark should be clearly visible.e) All steel parts powder coated 50 to 60 microns (IS 13871) after pretreatment. f) Head and tail side need not be raised above the mattress level if this are raised above the top plywood level. g) 8 numbers of connectors connecting the top to legs with structural member equivalent to the top frame size and thickness of 100 mm and 16 swg respectively minimum inner sides or right-angle members i.e. leg and top frame. h)Nylon shoes for all four legs. i) Any color j) withrigid stiffener without screw.

Study Table Overall size: 915 L x700 B x 762 H (mm) Material description: -a) Main top writing surface board is made of 19mm thick water proof plywood BIS marked (century, kit ply, green or equivalent etc.) the top surface and the surface below the top are laminated with 1mm thick and 0.5 mm thick lamination of the desired shade and balancing white respectively. The open edges on all the four sides of the top are duly edge banded with PVC tape of 2mm thickness on a through feed machine. b) Tubular frame of the study table is made of 25.4x25.4 (mm) Square section CRAC ERW (Electric Resistance Welded) tubes in thickness of 1.6mm. c) Sir.gle Drawer unit made of 22gauge (0.8mm thick) Drawer with telescopic channel for easy smooth movement. Good quality drawer Hasp and staple (kunda) & handle, overall size of storage unit is not less than 250(W)x375(D)x100(H) (mm). d) Good Quality nylon shoes and cap. e) All steel parts should be powder coated in 50 to 60 microns (IS 13871) after pretreatment. f) Any color g) The top board is projected by 25mm from all the sides. h) Joint must be welded/Use of screw is not allowed.

Study Chair Overall size: 910 H x500 W x 560 D (mm) Material description: - a) Chair frame made of Dia 25.4mm x 1.61 mm (16 swg) thick.MS ERW round tube. b) Seat Size not less than 400.0 (W) X 410.0 (D) (mm) and backrest size not less than 400.0 (W) x 310.0 (H) (mm). c) For the seat and backrest use pre-molded well contoured, ergonomically designed plywood in (IS 710) 19mm thick. Duly laminated with approved shade of lamination of 0.5 mm thickness. The seat and back would be laminated from both sides. d) The open edges are edge banded with PVC lipping not less than 2mm thick. e) Good Quality teak wood handles with PU coating. Size of handle 50 (W) X25 (D)x 310 (L) (mm) f) Good Quality nylon shoes and cap. g) All parts should be powder coated in 50 to 60 microns (IS 13871) after pretreatment. h) Any colori) Joint must be welded/Use of screw is not allowed.

Foam Mattress The mattress shall be of size 72" x 35" x 04" having density of 40 (+/-2), Breathable 90 pin hole foam with good bounce effect and special hardening to have extra support with Q cover having side to side zipper.

Mess Table & Stool Table of size 1800 x 900 x 750 mm with stainless steel Top and Frame with 6 nos. fixed S.S stool. Table main top made of SS 304 grade 18 swg with 8-10 mm thick water proof plywood base. Top frame, legs and footrest frame shall be of 304 grade stainless steel tubular section 30 x 30 x 1.50 mm thick Fixed stool of height 500mm with top made of 350 mm dia 304 grade stainless steel 1 mm thick (20 SWG) with suitable base if required stool frame and connecting member to table of 304 grade stainless steel tubular section 25 x25 x1.50 mm thick or superior one with good quality PVC shoes and fixed to main table footrest.

Waiting hall Chair 3 seater waiting chair : 3 seater perforated chairSize: Length -1500 mm, width -600mm ,Height -750mm.Full back with two 2 handles of double pipe at both ends,one handle with two pipe & second handle as per p[hotograph two pipe 2 legs of length 609mm bottom pipe out of 2' dia *16 SWG .CRCA sheet and back continous perforated seat.Outer frame made out of 3/4 x 16 SWG. CRCA pipe. Seat back support handles and frame should be silver powder coated. Weight of 3 seated must approx. 39 to 40 kg of each bench.

Security Guard Table Table size1500X750 Table top from 25 mm standard ply coverd with 1.5mm thick laminate on table top and 1.0mm 8thick laminated on all remaining surfaces. Modesty panel made of 18 mm thick standard ply. All the exposed edge surfaces of board to be covered with teakwood edge banding. All the wooden banding to be finished with PU paint .Sides made of 18 mm ply. Keyboard Tray on heavy Duty telescopic channels,Foot rest &CPU stand etc. accessories included. All joinery to be done with counter sunk SS screws. Pedestal units shall be made out of 18mm thick plywood covered with 1.0 mm thick laminate on outside & 0.8 mm thick laminate on inside including drawers on left side of table. The drawers should be mounted with heavy duty telescopic channels. Out of total 3 drawers one unit shall be 450mmW * 450mm D * 680mm H. The fascia of these drawes shall be made out of 18mm thick. both side laminated plywood with edge bending,with locking arrangements of 6 levers inbuilt branded lock system with key in duplicate.The drawer unit is provided with central locking system,wgere in the three drawers are locked with one key

Common Room Chair PLASTIC CHAIR (STACKABLE): Supply and putting in place P.P moulded chair from standard company made from heavy prime material minimum 3 kg in Weight. (Neel Kamal, Cello, Supreme, Poyster make only)

Office Table Table size 1800 mm L X 900 mm W X 750 mm H Table top from 25 mm standard ply covered with 1.5mm thick laminate on top and 1.0 mm thick laminate on remaining other surfaces. All the exposed edge surfacesof board to be Covered with teakwood edge banding. all wooden banding to be finished with PU paint. Pedestal units shall be made out of 18mm thick plywood coverd with 1.0mm thick laminate on outside and 0.8mm thick laminate on inside including drawers in lelft side of table. the drawers should be mounted on the heavy duty telescopic channels. Out of total 3 drawers one unit should be used for filing and two drawers shall be utility box drawers. the size of pedestal unit shall be 450mm W X 450 mm D X 680mm H. The fascial of these drawers shall be made out of 18 mm thick. both side laminated plywood with edge bending: with locking arrangement of 6 levers inbuilt branded lock system with key in duplicate. The drawer unit is provided lock system with key in duplicate. The drawer unit is provided with central locking system, where in the three drawer are locked with one key

Dust Bin Large Number of Compartments 04 Bin Capacity per compartment (Volume) 60 ltrs (Approx.) Total Capacity of 04 compartment bin 240 ltrs (Approx) Material stainless steel (Grade 304) Dimensions 35*16*55 inches (Approx) Thickness of SS sheet 16 gauge sticker of differnet colours paper (Dry waste) Plastic (Dry waste) Cans/Glass (Dry waste) and Food (Wet waste) pasted on both sides of the bins

Bidder Name

Amount

Daniel Furnitures P Limited(GSTN-08AACCD7637H1ZI)