Tender For Fabrication Of Various Item From Raw Materials With Labor Charge On Annual Contract Basis Under Hmt Do

Sr.No. Particulars Unit Quantity Rate Total Rs.

Labour charges for fabrication of C

1 clamp (U) for LT Shackle insulator Number.

made from 50x6mm M.S.Flat

Labour charges for fabrication of

2 fabrication of side clamp for PSC Pole Number.

made from 50x6mm M.S.Flat

Labour charges for fabrication of stay

3 clamp pair for PSC Pole made from Pair.

50x6mm M.S.Flat

Labour charges for Anchor rod from

4 65x65x6mm M.S. Angle and 16mm Sq Number.

Labour charges for Turn buckle from

5 65x65x6mm M.S. Angle and 16mm Sq Number.

Labour charges for fabrication of eye 2500 31

bolt from 16mm sq. Round bar.

Labour charges for fabrication of V-X 2500 54

arm from 65x65x6mm M.S.angle

Labour charges for fabrication of top 2500 16

fitting 65x65x6mm M.S. Angle

Labour charges for fabrication of 2.75

9 Mtr. angle made from 65x65x6mm Number.

Division Office:Opp.Bahumalibhavan,Hajipura, Himatnagar – 383 001 (Gujarat)

Website: www.ugvcl.com e-mail : [email protected]

Save Energy for Benefit of Self and Nation

CIN – U40102GJ2003SGC042906

Labour charges for fabrication of 1.35

10 Mtr angle made from 65x65x6mm Number.

Labour charges for fabrication of 0.75

11 Mtr. angle made from 65x65x6mm Number.

Labour charges for fabrication of

12 2750mm Angle CROSS ARM from Number.

50x50x6mm M.S.Angle.

Labour charges for fabrication of 0.75 2500 15

Mtr. angle made from 50x50x6mm.

Labour charges for fabrication of

14 mtr. channel made from Number.

100x50x6mm M.S. Channel

Labour charges for fabrication of V-X

arm extension made from 300 230

65x65x6mm M.S. Angle and 65x6mm

M.S. Flat,Length of angle 1:35 mtr

Labour charges for fabrication of

16 Earthing coils made from G.I.Wire Number.

Labour charges for fabrication of

17 three hole patti made from 50x6mm Number.

Providing labour for do unit made up

with 65x65x6 OR MS Angle 50x50x6 200 32

mm with 2GI pin Welded on both side

(NON SOR ITEM BUT REQUIRED)

Providing labour for M.S.Girder scrap

28 cutting Number.

(NON SOR ITEM BUT REQUIRED)

Division Office:Opp.Bahumalibhavan,Hajipura, Himatnagar – 383 001 (Gujarat)

Website: www.ugvcl.com e-mail : [email protected]

Save Energy for Benefit of Self and Nation

CIN – U40102GJ2003SGC042906

Agreed for ___________% above or below or same to schedule –B rates as shown above

Signature of Contractor

Division Office:Opp.Bahumalibhavan,Hajipura, Himatnagar – 383 001 (Gujarat)

Website: www.ugvcl.com e-mail : [email protected]