Renvation of Building

Supply & fixing 75mm thick metal stud partition using 12.5 mm thick Gypboard conforming to S 2095 1982 screw fixed to either side to 48 mm studs of 0 55 mm thick with the 50 mm floor and ceiling channel 0.55 mm and the joints duly finished with joint compound, paper tape and two coats Dry wall top coat as per specification

Providing and applving synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials applying emery paper Sand the surface clean & wipe off loose dust applying putty/ texture paint filler by putty knife/muslin pad air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational incidental labour charges etc complete for finished item of work for external walls excluding cost of access scaffolding

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls,

Supply and fixing of 12w LED Slim Panel Round Square suitable for Recessed Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS 15885 (Part 2/ Sec 13) 2012, operating voltage range of 150 to 265 Volts AC. P.F 0.9. Surge protection: 2KV THD 10%, with high power LEDs, having System Efficacy of >=100 lumens/watt CCT 3000k 5700K minimum CRI>70. etc. complete with earth connection and not less than two years warranty Makes: As per list of recommended brands as category 1.MAT-033/1

Provision for Electrical Works, including necessary conduits, sleeves, openings, junction boxes, cable routes, supports, earthing provisions, and other requirements for future installation of electrical systems, complete as directed by the Engineer in-Charge

Provision for 16mm ply and venier polish with Profile light inicuding cost and conveyance of all materials to work site and all operational, incidental labour charges etc. complete(As per quotation)

Provision for 16mm ply and Laminated with Profile lightinlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges cetc., complete.

Provision for Central Air Conditioning System, including necessary space, sleeves, openings, supports, electrical points, drainage provisions, and other requirements for future installation of the AC system, complete as directed by the Engineer-in-Charge