Construction of community centre at Rudrani temple in ward No-1

Earth work in excavation of foundation in ordinary soil including dressing and levelling the bed with cost and conveyance

Supplying of all materials, labour, T&P for filling in foundation & plinth with sand well watered and rammed including cost and conveyance

Supplying of all materials, labour, T&P for providing and laying plain cement concrete in C.C (1:4:8) by using 4cm sized bhg metal as leveling coarse in foundation and plinth etc. complete all depth and height including cost, conveyance, royalty, curing and T&P etc. complete as per the direction of Engineer in charge.

R.C.C work in ground floor of M-25grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Fly ash Brick masonary in foundation and plinth in C.M. (1:6) including all cost etc. complete.

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Fly ash Brick masonary insuper structure in C.M. (1:6) including all cost etc. complete.

Supplying of all materials Labour, T&P for providing 12mm thick cement plaster in C.M 1:4 including all cost, conveyance, Royalty and curing etc. complete outside.

16mm thick C.P (1:6) including cost and conveyance of all materials, labour, royalty, T&P etc. complete.

6mm plastering (1:4)in ceiling.

Supplying of all materials Labour T&P for Providing plastic emulation paint of two coat of approved make & finished including cost of paint etc, all charges complete.

Supplying of all materials Labour T&P for Providing weather coat of two coat over one coat of primer of approved make & finished including cost of paint etc, all charges complete.

Supplying of all materials labour, T&P for providing 2.50cm.thick Grading concrete (1:2:2) by using 12mm Chips (C.B) to roof slab with water proof Compounds treatment including all cost, conveyance, Royalty and curing etc. Complete.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes (as per IS-15778-2007 of SDR-11 class-1 grade similar to ASTM D 2846) on the surface with proper clamping system, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Supplying all materials, labour, taxes, T & P and fitting & fixing of different water supply CP on Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing, including all cost of labour, materials, conveyance, loading, unloading, T&P etc. all complete as per direction of Engineer-in -charge.

Supplying all material, labour,T&P and providing CC (1:2:4)cement concrete using 12mm bhg CB chips including hoisting and laying

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC conduit with 5 Amp, 250 V piano type switch with white colour frame ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. GROUP-A

Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5 / 6 amps socket outlet and 5 / 6 amps piano type switch & with colour frame, connection, painting etc as required. complete as per the direction of Engineer-in-Charge..

Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (A) (2 x 1.5 + 1 x 1.0) sq.mm copper wire for 6A Light plug Point, wall fan.

Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge.(B) (2 x 2.5 + 1 x 1.5) sq.mm copper wire for ,6/16A Plug & Lighting Switch Board from main switch.

Supplying & Fixing of angle / Batten Holder fitting complete with 1 no of LED Lamp of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-30 grade With approved colour design Pattern etc. complete.

Centering and shuttering for rcc work including all cost of materials,Labour T&P etc all complete. For column basde,GB

Centering and shuttering for rcc work including all cost of materials,Labour T&P etc all complete. FOR Column,Beam

Centering and shuttering for rcc work including all cost of materials,Labour T&P etc all complete for slab

Centering and shuttering for rcc work including all cost of materials,Labour T&P etc all complete for Lintel

Cement washing two coats

Installation of Ceiling fan(Crompton/Havells)

Fixing vetrified tile in cm (1:4)of 20 mm thick on the floor including cost of material etc

Fixing vetrified Tiles in dadoos,skirting,risers of stepson 12mm th cp (1:3) jointing with neat cement slurry mixed with pigments to match the shade of the tilrs including costs of tile/stone

Supplying ,Fitting ,fixing of GI gill including cost of all labour , material etc complete.

supply of stainless steel of 304 grade for gate

Fitting ,fixing of stainless steel gate of 304 grade including buffling ,polishing etc

supplying and fixing of GI / Cement concrete display board

Please Enable Macros to View BoQ information