Construction of Indoor Hall at Nagrota Bagwan in Distt Kangra Himachal Pradesh (SH-Construction of T.T. Hall, Changing Room, Ceiling and Wooden flooring and water supply and Sanitary Installation etc).

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited , chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then retuning the stacked soil in15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earthwork and filling in foundation and plinth including ramming and consolidating upto all leads, including entire carriage of materials within all leads, lifts and other incidentals.

Sand filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing and the like floor etc. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. .

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts, square, rectangular, polygonal in plan, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications, drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depth/thickness including mouldings, cornices etcetera upto all levels as per specifications, approved drwaing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing moulding upto all floor level as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA/Sail/Tisco for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 25mm (Twenty five millimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 10mm (Ten millimetres nominal size) thick and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : Six sand : Twelve graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) at plinth level in cement mortar 1:6 (One cement: Six sand) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth with hard stone approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any heights in all floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Autoclayed cellular Aerated concrete blocks 200mm (Two hundred milimetre) thick confirming to IS:2185 (iii) 1984 bonded together with ploymer based mortar and finished with 12mm (Twelve milimetre) thick cement plaster 1:6 (One cement : six sand) on both side complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 10mm (Ten millimetres) anti skid water proof stain and impect resistant heavy duty vetrified tiles Nitco or equivalent thick in flooring 600x600x10mm (Six hundred into six hundred into ten millimetres) size in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required upto all floor levels, including carriage of material within all leads, lifts and other incidental and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles 300x300x8mm (Three hundred into three hundred into eight millimetres) in grey/coloured of required shade in skirting risers of steps and dados on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised/colour coated aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames. All complete as per architectural drawings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised/colour coated aluminium work for shutters of doors windows & ventilators shutters of Jindal/Hindlco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS : 1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as pe specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. Plain grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size aluminium Pilot/Sheet or equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium oxidzed seccular anodized transparent or dyed to required colour and shade with necessary screws etcetera.Tower bolts (Barrel type) bright finished with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

250x10mm (Two hundred fifty into Ten millimetres) nominal size

200x10mm (Two hundred into Ten millimetres) nominal size

Providing and fixing aluminium Pilot oxidized seccuolar anodized transparent or dyed to required colour and shade handles with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetres) nominal size

100mm (One hundred millimetres) nominal size

Providing and fixing 300 mm (Three hundred millimetres) bright finished hard drawn hooks and eyes complete including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S.fan clamp type -1 of 16 mm (One to Sixteen millimetres) dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement isto three sand) for all heights complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

38 mm (Thirty eight millimetres) thick parquet (wood block) of 1st class Deodar/Teak wood including antitermite treated deodar wood/Teak wood runners of size 70mmx40mm (Seventy millimetres five into forty millimetres) to be placed on the vapor barrier at 250mm (Two hundred fifty millimetres) centre to centre, runners to be fixed on the bottom side which is laid over 25mm (Twenty five millimetres) thick levelling layer of cement concreate 1:2:4 (one cement : two sand : four stone aggregate nominal size) ( to be paid separately). The gap between wooden flooring and surrounding tied area will be 6 to 8 mm (Six to Eight millimetres) on all sides. The floor will be applied with one coat of polyurethene at the bottom. After installation the floor will be machine sanded with floor drum sander and finished with french polish. Game line marking to be carriedout in required colours before applying the finish coat etc; as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood/steel screws (frame work and cover fillets to be measured and paid for separately) as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing railing for stair case having baluster of 20x20mm (Twenty into twenty millimetres) and 8x8 mm (Eight into eight millimetres) solid in combination M.S. squared with a cleared height of 85 cm (Eighty five centimetres) @ 60 cm (Sixty centimetres) C/C jointing in cement concrete steps and jointing with electrical/gas welding at top of alongwith handrail M.S. rectangular pipe of 75x40mm (Seventy five into forty millimetres) SWG. the baluster welded jointed with each with 2 Nos. (Two ) M.S. flat of 50x50x5mm (Fifty into fifty into five millimetres) complete with applying a coat of red lead paint complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new steel & other metal surfaces With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final smooth finish to the surface complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing walls with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on un decorated wall surfaces( two coats) to give an even shade and final finish after throughly brushing the surface clean of all dirt, dust, loose pieces of scales and also including preparing the surface even and sand papered smooth complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five milimetres) thick(un-consolidated)bed of dry brick/stone aggregate 40mm (Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 1545-2004 of Kitec or its equivalent for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm) sixteen millimeter diameter pipe O.D. pipe

1620 (20mm) twenty millimeter diameter pipe O.D. pipe

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to 1620 to Kitec or its equivalent for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Equal Tee of Kitec /Kisan

Equal Elbow of Kitec /Kisan

Female Tee of Kitec /Kisan

Female Elbow of Kitec /Kisan

Male Thread Socket of Kitec /Kisan

Female Thread Socket of Kitec /Kisan

Female Connector of Kitec /Kisan

Providing and fixing 110mm (one hundred ten) millimetre diametre PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PTMT Coloured/white high density polyethylene/poly propylene 10.00 (ten) litres capacity (full flush) European standard control low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size PVC ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin I.S. marked No. 1025 Cera / Hindware or equivalent 630x450mm (Six hundred thirty into four hundred fifty millimetres) flat back with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (Heavy duty makes ISI marked No. 8931) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P. brass ISI marked IS No. 8934 of Jal/ESS ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres CP Brass 'S' trap for wash basin and sink etc. complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China ordinary wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white plastic seat (solid / Holow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass and screws and washers complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass Jal/ESS ESS or equivalent (Heavy duty makes ISI marked is No. 8931 & 8934) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. (Chromium plated) brass Towel rail ISI marked IS No. 8934 of Jal/ESS ESS complete with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder Jal/ESS ESS or equivalent (Heavy duty make ISI marked NO-8931 & 8934) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated.(Heavy duty makes ISI marked is No. 8931 & 8934) brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Chromium plated Jet pressure cistern No. 2101 of approved quality and ISI marked of Jal / ESS ESS/Jaguar of approved quality and colour with one metre tube including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated push cock tap of ISI marked IS NO 8934 of Jal / ESS/Jaguar including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated fancy bib tap of ISI marked No. 8934 of Jal / ESS ESS/Jaguar complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres C.P. brass pillar tap with capstan head IS marked No. 8934 of Jal/ESS ESS/Jaguar including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres brass angle valve without nuts IS marked IS No. 8934 of Jal/ESS ESS/Jaguar as per specifications including entire carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 100mm (One hundred millimetres) diametres sand chromium plated grating Jal/ESS ESS or equivalent for gully floor or Nahni trap complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and placing water tank make P.V.C. SINTEX or equivalent having capacity of 1000 (One thousand) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) diametre Brass stop cocks hindware complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimetre) diametre M.I. Union for wash basin or sink hindware complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) diametres on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (Four decimal Five kilograms per square metre) including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (Four decimal Five kilograms per square metre) including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Plain bend 100mm (One hundred milimetres) diametres size on wall faces PVC (D-Plast) for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Plain shoe 100mm (One hundred milimetres) diametres size on wall faces PVC (D-Plast) for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm diametre M.S. holder bat clamps of approved design to P.V.C. rain water pipe embedded in and including cement concrete blocks 10x10x20cm of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

KARAN DHADWAL