Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.6 LAdmitted-Finance | +2.00% | ₹4.6 L | L1 | Admitted-Finance |
| 2 | L2₹4.6 L+₹2,232.86 (0.49%)Admitted-Finance | +2.50% | ₹4.6 L+₹2,232.86 (0.49%) | L2 | Admitted-Finance |
| 3 | L3₹4.6 L+₹4,421.05 (0.97%)Admitted-Finance 112 1 THAKURBARI STREET P O SERAMPORE HOOGHLY 712201 | SERAMPORE | HOOGHLY | WEST BENGAL | 712201 | +2.99% | ₹4.6 L+₹4,421.05 (0.97%) | L3 | Admitted-Finance |
Tender Value
₹4.5 L
EMD Value
₹8,931
Closing Date
11 Aug 2026, 3:00 pmClosed
EXECUTIVE ENGINEER
OFFICE OF THE EXECUTIVE ENGINEER, COMMON SERVICE DIVISION, E and AM SECTOR, KMDA. UNNAYAN BHAVAN, 1st FLOOR, B BLOCK SALT LAKE CITY, KOLKATA -700 091.
Restructuring of existing AE and JE room along with construction of a new room for Divisional Accountant at Block-L, 1st FloorMD-II, KMDA, Unnayan Bhawan, Saltlake, Kol-700091
2026_KMDA_1035529_1
06/e-NIT/EE/CSD/EandAM/KMDA of 2026-27, Date-28.07.2026
Open Tender
CIVIL WORKS
Percentage
60 days
Unnayan Bhavan, Saltlake, KMDA
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹8,931
11 Sept 2026
4 Aug 2026
13 Aug 2026
4 Aug 2026
11 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in 1st floor.
(a) 35 mm thick shutters (single leaf) | 8.4 | CuM | 2,673 | ₹22,453.2 |
| 2 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). | 1 | CuM | 98,312 | ₹98,213.69 |
| 3 | Godrej Hydraulic door closer of approved qualityt as per I.S.I fitted and fixed complete. (a) Heavy type | 4 | Each | 2,064 | ₹8,256 |
| 4 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws 75mm long x 10mm dia. bolt. | 4 | Each | 48 | ₹192 |
| 5 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(Pg 145 it 28 Building 2017) 250mm x 19mm dia. bolt. | 4 | Each | 287 | ₹1,148 |
| 6 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: | 16 | Each | 72 | ₹1,152 |
| 7 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod) | 4 | Each | 111 | ₹444 |
| 8 | Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins/ soffit all complete as per the drawing & directions of Engineer-in-charge. | 36 | SqM | 341 | ₹12,276 |
| 9 | Supplying ,fitting & fixing Eco-friendly, Moisture Resistant and Incombustable Gypsum plaster board/tiles (Density > 700Kg per Cu.m) conforming to IS 2095- Part 1, 2011 of size 595mm X595mm of approved design and brand placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with
(ii) 12.5mm thick Square edged Gypsum Plaster Board / tiles | 36 | SqM | 388 | ₹13,968 |
| 10 | Partition of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens
of size 40mmx 25 mm): In 1st Floor | 175.5 | SqM | 791 | ₹1,38,820.5 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
BOQ_2543689.xls
BOQ • 0.39 MB
SpecialTC.pdf
Tender Documents • 0.67 MB
KMDA_Form_No1.pdf
Tender Documents • 1.17 MB
AffidavitDeclarationNIT06.pdf
Tender Documents • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .