COMMUNITY HALL REWIRING OF DINING HALL AT AZHOOR GP COMMUNITY HALL UNDER AZHOOR GP201920

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 14SWG Copper earth wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.

Single control light point with 6A, 3 plate ceiling rose

Single control light point without ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.(Long)

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug point with 6A,5Pin plug socket controlled by 6A switch including MS box,front plate and giving necessary connections etc.

Supply and fixing Computer point including supply and fitting 3 sets of 6A modular type plug socket 5 pin with 6A modular type SP control switches on suitable size MS metal box ( Group B) as per PWD specification

Supply and providing 6/16A modular type power plug socket controlled with 16A modular type switch mounted on suitable factory built MS box with earthing facility giving interconnection etc. as required.

Supply & fixing the following types of boxes suitable for modular accessories in surface/recess including making good the damages,colour washing etc as required.(Group B/RoHS compliant)

2 module metal box in recess

Supply & fixing the following types of front plates on the existing modular boxes.(Group B/RoHS compliant)

2 module white/off-white

Supply and fixing the following modular switches and accessories in the existing front plates and giving necessary connections as required(Group B/RoHS compliant)

25A DP Switch with indicator

25A 3 pin socket

Supply,conveyance,installation ,testing and commissioning the light fittings of the following size made of CRCA sheet of 0.5 mm thickness complete with all accessories and lamps etc directly on wall using PVC round block neatly painted to suit the fitting and giving connections with required length of16/0.2 mm copper conductor flex wire conforming to relevant ISS and giving connections as required

1200mm 1x20W LED Lamp with box type fixture

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required

Supply and providing the following types and power rated lamps in the existing fittings as required

Normal size 14W BC/ES Retrofit CFL/ 7W LED bulb

Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable for 9W CFL to wall/Ceiling including giving necessary connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire confirming to relevant ISS or extending the original wiring and making good the surface as required.

Supply and fixing the following types of outdoor LED lamps with die cast aluminium body confirming IP 66 along with all required accessories as required

36W LED TOP LIGHT FITTING

24W LED TOP LIGHT FITTING

10W LED IP65 FLOOD LIGHT FITTING with electronic driver complete as required.

Supply,fabrication,conveyance and fixing the following size of 'B' class GI pipe bent to shape/cut and welded to shape and fixing the same to wall or parapet using clamps as knoted along with each size,painting with two coats of synthetic enamel paint over a coat of zinc chromate primer,making good the damages,colour washing etc as required(for the installation of outdoor light fitting)

25mm dia pipe with HG company fabricated clamps

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200 mm sweep - 5 star rated

Supply, conveyance, installation, testing and commissioning wall mounting fan of the following sizes using mounting brackets supplied along with the fan and giving connection with existing wire.

400 mm sweep

Supply,conveyance,installation,testing and commissioning of the following sizes of exhaust fans in the existing opening,fixing necessary bolt and nuts,making good the damages etc.as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor fex wire conforming to relevant ISS.

300/305mm,single phase,light duty exhaust fan in metal frame .

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories in surface including cutting the wall and making good the damages etc as required.

20 mm dia light gauge

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories in recess including cutting the wall and making good the damages etc as required.

20 mm dia light gauge

Supply and drawing 650/100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 3 run

2.50 sq mm 2 run

1.50 sq mm 1 run

4.00 sq mm 2 run

2.50 sq mm 1 run

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

6 way (8+18) three phase double cover (IP 42/43)

4 way (8+12) double cover TPN vertical DB with provision for fixing 4P MCB/Isolator/RCCB/RCBO as incomer and SP/TP MCB as outgoing(IP 42/43)

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

40 A four pole mini break isolator

40 A, 4 pole, 30 mA RCCB

100 A four pole mini break isolator

32A,10KA,TP,MCB (C curve)

6 A to 32 A, 10 kA, SP MCB( C curve)

Supply and fixing On load Change Over Switch complete with handle assembly,door interlock and padlocking arrangement of the following rating

63A,AC 23A,4pole on-load COS

Supply,laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminum power cable,1.1KV grade of the following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms,making good the damages,colour washing etc.as required.

4 core 16 sqmm with factory made clamp

4 core 10 sqmm with factory made clamp

Supplying siemens / tropodur type nickel plated double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required.

Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.

4 sqmm -16 sqmm with 12 mm wide x 1 mm thick clip

Supply of superior quality aluminium tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

Supply and providing ISI pipe earthing as per IS 3043 with 3.60m long 40mm dia B class GI pipe providing GI funnel with well mesh at the top ,filling around the GI pipe at the radius of 15 cm with homogenous mixture of charcoal and river sand up to a height of 2.5m from the bottom and rest of the portion with excavated soil including watering and providing brick work masonry 1:6 cement mortar at the top, plastering the inside and top of the man hole with 12 mm thick 1:6 cement mortar(ordinary soil)

Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required

300 x 300 x 6 mm cast iron gully trap with covering

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

3.15 mm bare copper conductor (10 SWG)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm copper conductor (10 SWG)

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil).

3.15 mm copper conductor (10 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

3.15 mm (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

25 x 3mm brass bolt & nut

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.

15 mm dia

Supply and fixing the following accessories in the existing meter and giving connections etc.

63 A, 415V bakelite fuse fittings

63 A,415V , 2 way neutral link mounted on DMC/SMC base

6A - 100A DIN type HRC fuse link of size 00

Dismantling damaged Light fittings,Switch boards,Ceiling fans etc makinh good the damages as required including wiring termination etc.

SUBASH K