SPL REPAIR TO BLDG NO T-17, T-18 AND T-19 OF OLD BUTCHERY UNDER GE DEHRADUN

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M& L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed.

Ditto as item No. 03 above, but except brick complete all as specified.

M&L brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed.

M & L 5 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified

M&L for complete removal of existing treatment from wall upto brick work or plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper and applying two coats of cement base paint over a coat of primer complete all as directed.

M&L for complete removal of old decorated surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer on internal wall surfaces complete all as specified in SSR Part I and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L for preparation of wall and applying interior grade wall care putty 1.50 to 2 mm thick to make the surface smooth as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified

Taking down wooden chowkhats or frames with shutters n. exc 1.5 sqm each (without taking off shutter from the frame) complete.

All as per item No 16.00 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate)

M&L 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S & F 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified.

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified.

S & F stainless steel barrel tower bolts 200 mm long one piece and fixed complete all as specified

S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame ,complete

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete.

M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete.

Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Dismantling of framed or unframed timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F for Roof trusses (framed), trussed, rafter, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

M & L applying two coats of Synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).

M&L for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor finished complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete.

M&L glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for Machine cut kota stone as in skirting 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

M&L 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M&L grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified.

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified.

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n exceeding 10 cm girth complete.

Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete.

S & F in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified

S & F in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete

S & F in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete

S & F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified .

S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

M & L in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete.

S & F in repair 20 mm dia bore gun metal gate valve complete all as specified and directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

Formwork to sidesand soffits of floor or roof beams, beam haunchings, girders bressumeers,lintels cnatilvers, shelves including supports overhangs, etc also splays between floors and beams etc all as specified and directed.

M & L RCC Type B0 1:2:4 (12.5 mm graded aggregate ) Beam,Cantilevers, bressummers, lintels over 1.5 m Span all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT) complete.

"All as per item No 82 above but 5 mm dia and over upto and including 10 mm dia in stripps,spacers and binders all as specified and directed.

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the independent board with other switchs.

One 5 pin 5/6 Amps socket outlet point on same board controlled by one, one way switchs.

Description all as per item No 84 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

S & F in replacement switch piano, flush type, single pole one way 6 Amp .

S & F in replacement switch piano, flush type, single pole one way 16Amp .

S & F in replacement socket outlet, multipurpose, 2 in 1, 5 pin, 6 Amp.

S&F in replacement socket outlet, multipurpose, 2 in 1, 5 pin, 16 Amp with fuse and neon indicator .

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body .

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

S & F in replacement MCB SP 240 volts 'B' Curve 10 KA . including connection with suitable size copper lugs of following capacity

MCB SP 6 to 32 Amp.240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in replacement Distribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed

S & F in replacement MCB DB, sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:-

8 way SPN DB.

S & F in replacement Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacity fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 protection,415 volt and suitable for fixing FP MCCB 100/125 Amps as incomer and combination of SP/TP MCBs as outgoings of following capacity including taking down old unsv MCCB DB,s. Note: Suitable MCCB and outgoing MCBs will be measuredand paid separately under relavant items of this schedule.

4 Way VTPN DB

S & F in replacement MCCB ,4 pole ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting of following capacity .

63 Amps with rupturing capacity 16 KA

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings .

Supply and Fixing in replacement high prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV

Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 25 sqmm 4 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out.

Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed.

M&L for GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 40mm dia .

M/S VIKRAM AND SONS (BID ID -3487574)

M/S RAJESH AGARWAL (BID ID -3488664)

M/s Pradeep Kumar (BID ID -3482910)

MOHAN LAL GUPTA (BID ID -3482762)

M/S C S AITHANI (BID ID -3482749)