SITC of 8.0 Mtr.- Hot Dip galvanised Octagonal type Streetlight Pole with 90 W LED Streetlight fittings, CCMS Panel with allied accessories including five years free comprehensive guarantee period with 5 Years Operation & Maintenance at GIDC, Sachin Industrial Estate -Re-Invite.

DESCRIPTION QTY UNIT Rate/Unit Total Amount

DESCRIPTION QTY UNIT Rate/Unit Total Amount

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet. standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

1 terminal and arrangement for cable termination to be Ea

erected With Suitable foundation (Included) as per 1,640.00

details given by manufacturer considering site

requirement.(G) 8 Mtr. Long 70 mm Top X 155 mm

bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts Approx Pole

Providing and fixing of Solderless Crimping Type

Aluminium Lugs (4 Nos.

per termination) conforming to IS suitablefor cable of

2 following size evenly crimped with high pressure tool Ea

& connected to switchgear terminals with

brass/cadium plated nut bolts in an approved manner.

(B) 10 Sq. MM (As Per Make List)

Providing & erecting approved make of SP MCB 6A to

25A Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240V AC system and having

3 breaking capacity 10 kA to be erected in existing box Ea

confirming to IS 8828/1998 with ISI/ CE Mark,Cat-III.

(Make will be as per attched make list)

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

4 coupling and buch buried in specially prepared earth Ea

pit complete with necessary 8 SWG earth wire.

Providing and erecting Street Light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

mm /80mm / required size of pole top having

sufficient fasteners for fixing the brackets and having

5 spread of 1.5.mtr. length with 110 deg.with vertical Ea

plane & suitable welded stays, reducer and with check

nuts complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm

Bracket 1.5 Mtr

Executive Engineer (M&E)

Signature of Contractor G.I.D.C., Vapi/Surat.

Supplying and erecting LED street light fittings with

High power White LEDS wattage of 1 Watt and above

assembled on single MCPCB, efficiency more than

Im/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V.Power Factor more than 0.95, THD< 10%, CCT

5000 K to 5700K, Uniformity ratio 0.45, Luminaire

efficacy> 130 lumens/watt LED driver efficiency>

% ( fittings required LM 79 & LM-80 certificates)

6 (NOTE Below description have shown ranges of Ea

Wattage capacity of LED fittings The Engineer

incharge may select any wattage capacity between the

(A) Street Light (IP-66), Surge protection -4KV integral

and Light must have 440VAC line supply with over-

voltage protection. (iv). Above 90 Watt. Make:-

CREE/OSRAM/PHILIPS/Nessa/Lumileds/NICHIA/SE

OUL/BridgeLux (U.S.A) make LED used for luminaire (

fittings required LM 79 & LM-80 certificates)

Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires

7 of following size to be erected as directed.(h) 2.50 13,121.50 Mtr

Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(1)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

8 core) necessary clamps or in existing trench / pipe of 57,400.00 Mtr

following size of cables. © 4 core 10 Sq.mm. (Make:

RR/KEI/Havells/Polycab)

Providing & laying of approved make Doubled Walled

Corrugated Pipes (DWC) of polyethylene (conforming

to IS 14930 - II) with necessary connecting accessories

9 of same material at required depth in existing trench 49,200.00 Mtr

for laying of cable. below ground / road surface for

enclosing cable. (A) 50 mm outer dia. (As Per Make

Providing & laying of approved make Doubled Walled

Corrugated Pipes (DWC) of polyethylene (conforming

to IS 14930 - II) with necessary connecting accessories

10 of same material at required depth in existing trench Mtr

for laying of cable. below ground / road surface for

enclosing cable. (C) 90 mm outer dia. (As Per Make

Executive Engineer (M&E)

Signature of Contractor G.I.D.C., Vapi/Surat.

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of

mm with constant ohmic value surrounded by highly

11 conductive compound with high charge dissipation Ea

suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM

has to submit test certificate including value of earth

resistane of installation.[A] For electrical installation

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply

12 by making up to following size of holes at both ends Mtr.

complete.(B) Up to 150 mm bore dia

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over the

13 run and back filling the same and making the surface 49,200.00 Mtr.

as normal ground.

Executive Engineer (M&E)

Signature of Contractor G.I.D.C., Vapi/Surat.

Providing and erecting Three Phase IoT GSM/GPRS

Central Control & Monitoring System (CCMS) Panel for

Streetlights Smart Feeder Panel with 3 Phase

GSM/GPRS CCMS Streetlight Controller with LCD

Display (1 Nos.). Streetlight Controller with Individual

each Phase Control (Energy Saving feature) and Spare

relay facility. Streetlight Controller having 10 years of

reserved battery for RTC. With 50 programmable

schedule, month-wise offset settable facility,

Astronomic sunrise/sunset time programming in-built

for year long schedule. Operating Voltage @ 440 V AC

with Over Voltage & Short Circuit protection. 2 hour

Battery Back-up for Streetlight Controller. Panel to

have 1 Nos. of 3 Phase – Class 1 Energy Meter for

Energy & Fault monitoring on CCMS Web Dashboard.

Panel consisting of 3 Nos. of 3 Pole Contactors (3 x

A), 7 Nos. of 1 Pole Miniature Circuit Breakers (32

Amp.) for Bypass, Input / Output supply

functionalities, 1 Nos. of 4 Pole Earth leakage circuit

breaker for safety protection. Standard lock & key

14 facility for Panel security.Door Switch for Ea

unauthorized access & tamper detection.

Accelerometer for panel movement detection &

tamper alerts. Suitable amount of Wires, Connectors,

Terminal Blocks included in Panel. 16/18 gauge M S

with industrial exterior powder coated PP with seven

tank process RAL 7035 All weather-proof Enclosure

Panel having IP65 rating. Waterproof Glands &

Grounding Stand included. Dedicated IoT

communication GSM/GPRS SIM Card (with minimum

5 years of recharge) for Wireless Communication with

CCMS Web Dashboard. 5 Years Data Hosting & Server

Charges to be included with CCMS Web Dashboard.

Load status, Live analytics, Energy Meter monitoring

(Parameters such as kW, kWH, PF, I, V), comparative

analytics, reports generation facility. Fault detection

on web dashboard. GIS Mapping of CCMS Panel on Web

Dashboard. Secured MQTT Communication for Cloud.

Includes Android & iOS Mobile Application. Local

communication facility via Mobile Application in case

of GPRS connectivity failure.

Providing & erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S. 15.00

housing. (Cat - III) suitable to work on AC supply with

all internal connection-ICS=100% of ICU only.(1 No.

per Distribution Box) (Make will be as per attched

Executive Engineer (M&E)

Signature of Contractor G.I.D.C., Vapi/Surat.

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.(c) 2 to 45.00

4 core 10 Sq. mm (Make will be as per attched make

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cm or required depth for laying any size of

17 cable or locating the fault all over the run and back 49,200.00 Mtr.

filling the same and making the surface as normal

Providing , erecting , fabricating the M.S. structure as

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing

duly painted with one coat of red oxide with erection

on site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body

& doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for

19 measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with

following approved manufacturers with following

size.(C) The standard companies switch gear shall be

used and only manufacturers as per IEC 61439 for

beneficial use. (iv) with 1000 mm. depth

Executive Engineer (M&E)

Signature of Contractor G.I.D.C., Vapi/Surat.

Providing and Supplying ISI mark G.I. Pipes with

Couplings of following class and diameter including all

taxes, insurance, transportation, frieght charges,

20 octroi, inspection charges, loading, unloading, Rmt.

conveyence for departmental stores, stacking etc

complete (IS-1239). Heavy Duty 80 mm

Agency has to do successful operation and

maintenance of Street light network by using their

manpower, material, tools & tackles etc. for 5 Years

Operation & Maintenance. Payment will be released

monthly based on certificate of successful operation

and maintenance of installed street light network by

21 DEE[M&E], GIDC, Surat in this work. More criteria of 98,400.00

successful operation and maintenance is described in month

technical specification with 5 Years Free

Comprehensive Guarantee period. Total Quantities

are as follows: Operation of 1640 poles for 60 months

Total Amount Rs.:-

Total Amount Rs.:-

The Unit rates specified for various items to be executed as per Schedule "B" attached with the

Price Bid are excluding GST but inclusive all labours, materials, testing charges, equipments, all

incidental charges involving in the work and as specified in the Mode of measurement &

payment of detailed specifications of items incl. all taxes, royalty, octori, transportation cost

etc. all as applicable presently as to be enforced for future by any / all including Central/State

Government & Statutory bodies from time to time.

I/We agree to carry out above work at % above the estimated Rate put to

tender Percentage in words (_ )

I/We agree to carry out above work at % below the estimated Rate put to

tender Percentage in words (_ )

Estimated Amount put to Estimated Amount put to

Add % Above Rs. . Deduct % Below Rs.

Net Amount Rs. (In figures). Net Amount Rs. (In figures)

Rs. (In Words). Rs. (In Words)

I/we have read the condition mentioned in this tender and agree to abide by the same

Executive Engineer (M&E)

Signature of Contractor G.I.D.C., Vapi/Surat.