Construction of 05 seated pink Toilet Complex with Septic tank of Police Line Bareilly.

PART-A

Clearing jungle including uprooting of vegetarian grass, bush, wood, trees and sapling of earth up to 30cm measured at a height of Im above ground level & removal of rubbish upto a distance of 50m. Outside the periphery of area. (S.I. No. 259)

Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the bullding and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 273)

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

P/L of 2cm thick DPC with cement and approved coarse sand 1:2 and including water proofing materials as ordered by the E/l in the proportion as specified by the manufactures including supply of all material, labour and T&P etc. required for proper complition of the work and including proper curing and shuttering as necessary. S.I. No. 360

Sand filling in plinth including supply of necessary quantity of sand from a distnce not exceeding 8 Km. from the site of work & including wstering, dressing etc. Rate includes cost of all materials, labour, T&P etc. required for proper complition of the work. (excluding royalty) S.I. No. 255

First class B/w in 1:4 Cement C'sand mortor in S/S including supply of all meterial labour T&P etc required for proper completion of work SI N0. 305+310

RCC 1:1.5:3 with cement c'sand stone grit of 20 mm gauge in lighter beam excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 285

RCC 1:2:4 with cement c'sand stone grit of 20 mm gauge in slab of culvert excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 284

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

Fabrication of Mild steel or iron work of grill and stair case railling (When not included in an overall rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts and wastage etc. and there fixing if required for proper completion of work.(S.I.No.502c)

P.F in position collapsible steel shutters with verticle channel 20x1 with top and bottom rails of T iron 40x40x6 mm with 38mm dia steel pulley with bolts, nuts locking arangemnet, stoppers, handles complete including applying a priming coat of approved red lead paint (S.I. NO. 518)

Two coat painting with synthetic enamel paints on new plain surface with primer of approved quality of colour by E/I.

Laying of 25mm thick KOTA stone of sixe 45x45cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortor including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of El including cutting polishing with wax polish including supply of all materials T&P etc. required for proper complition of the work. S.I. No. as per NEW ITEM 1

Providing and laying of 600x600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. As per D.A.R. 11.41.2

P/F of 1st quality ceramic glazed wall tiles conforming to IS: 15622 of approved make in all colours, shades except burgundy, bottel green, black of any size as approved by El in skriting, rises of step and dedo over 12mm thick bed of cement mortor 1-3 and jointing with grey cement sullery @3.3 kg per sqm including point in white cement mixed with pigment of matching

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

200 Thick neat cement Punning all complete

12mm Thick Toughened Glass for Internal glass door

P/Laying 2mm thick plaster of paris putty for proper complition of the work as per Direction of E/I all complete As per D.S.R. No. 13.26

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @1.67 ltr/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm) as per D.S.R. No. 13.46.1

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: as D.S.R. 17.1.1

Providing and fixing W.C. pan with ISI marked white solid plastic seat and lid white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required As per D.S.R. No. 17.3.1

Providing and fixing one piece construction white vitreous china squatting plate with integral iongitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings. standard size G.I. /PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required Single squatting plate with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap as per D.S.R. 17.25.1

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

P/F of Exhaust Fan all complete as per direction of E/1

P/F of Ceilling Fan all complete as per direction of E/I

S/F of 32mm thick flush doors commercial quality conforming to IS:2202 Part 1 (1983) including fixing of wooden cleats and sttopers and including fixing fixing and adjustment of hinges, bolts, lock, handle, spring fitting with necessary screws to be supplied departmentally S.I. No. 470

Construction of Brick work Drain as per direction of E/I

Construction of Inspection Chamber as per direction of E/I

Construction of Collecting Chamber as per direction of E/I

P/L of 110 mm dia P.V.C. rain water pipe conforming to IS: 13592 all complete as per D.S.R. 12.41.2

P/F of Soap Dish all complete as per direction of E/I

Providing of Cover of the cut out by Plastic Sheet all complete

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, ivc fixing the railing with necessary accessories & stainless steel dash fasteners. stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). As per D.S.R. No. 10.28

P/F of Sanitary pad Vending Machine all complete as per direction of E

P/F of Electric Incinator all complete as per direction of ЕЛ

P/F of Feed back Machine all complete as per direction of E/I

P/F of Towel Rail all complete as per direction of E/I

P/F of Jhoola all complete as per direction of E/I

P/F of Bench in Baby feeding room all complete as per direction of E/1

PART-B

Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the bullding and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 273)

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

RCC 1:1.5:3 with cement c'sand stone grit of 20 mm gauge in lighter beam excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 285

RCC 1:2:4 with cement c'sand stone grit of 20 mm gauge in slab of culvert excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 284

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I.

Providing M.S. footrests including fixing in manholes with 20x20x10cm cementconcrete blocks 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design: With: 20x20 mm square bar

P/F of Soil Waste Vent Pipe 75mm Sand Cast iron S&S

P/F of Precast RCC Manhole Cover 500mm Internal Dia

P/F of Soil Waste Vent Pipe 75mm Sand Cast iron S&S Turminal Guard

PART-C FOR 2 NO. CHAMBER ITEMS

Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the bullding and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 273)

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

RCC 1:2:4 with cement c'sand stone grit of 20 mm gauge in slab of culvert excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 284

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

PART-C FOR 2 NO. CHAMBER ITEMS

Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the bullding and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 273)

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

RCC 1:2:4 with cement c'sand stone grit of 20 mm gauge in slab of culvert excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 284

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

Provision for Installation of Submwersibble pumpset of 1.5H.P.

Provision of Water Supply @ 5% on Item No. 01

Provision of Electrical Supply @ 4% on Item No. 01

Provision of 1.5Tonne AC Split 2No. (50990.00 Per Piece)

Provision of Glow Sign Board and Notice Board