Loading…
Loading…
Tender Value
₹1.8 L
EMD Value
₹1,850
Closing Date
3 Oct 2026, 11:00 am6d left
Er Balam Sharma
Er Balam Sharma Sr Executive Engineer Maintenance Division HPSEBL Shimla 04
Annual repairs and maintenance of Type-II Quarters (Three storied, 3 sets) and Type-III Quarters (three storied, 6 sets) Building at Kumar house, Shimla-04
2026_HPSEB_143717_1
XEN-MD-KH-DB-10/2026-27.
Open Tender
Repair and Maintenance Services
Percentage
60 days
Kumar House Shimla
Please refer Tender documents.
7 documents required · 7 mandatory
₹590
₹1,850
18 Sept 2026
18 Sept 2026
5 Oct 2026
18 Sept 2026
3 Oct 2026
18 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 13.98 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:13.98.1 One or more coats on old work | 136.75 | Sqm | - | - |
| 2 | 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 4 | Sqm | - | - |
| 3 | 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge.14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) | 5 | Sqm | - | - |
| 4 | 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :13.61.1 Two or more coats on new work | 30 | Sqm | - | - |
| 5 | 12.47 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.12.47.1 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified | 3.45 | Sqm | - | - |
| 6 | 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 393.71 | Kg | - | - |
| 7 | 16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.16.70.1 Made of G.I. wire of dia 4 mm | 21.99 | Sqm | 700.29 | ₹15,399.38 |
| 8 | 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture | 32.68 | Sqm | 95.59 | ₹3,123.88 |
| 9 | 11.33 25mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with 11.33.2 Second class deodar wood | 5 | Sqm | - | - |
| 10 | 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2 17.28.2 Flexible pipe 17.28.2.1 17.28.2.1 32 mm dia | 1 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
TenderDoc10.pdf
Tender Documents • 5.99 MB
BOQ_213596.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .