BEAUTIFICATION OF SHAKAT SHANALA LAKE UNDER MORBI MUNICIPAL CORPORATION AREA AT MORBI (RE-TENDER)

TOTAL AMOUNT ₹37,194,041.76

PHASE-1 (LAKE FRONT DEVELOPMENT) SCHEDULE-B

Name of Work - BEAUTIFICATION OF SAKHAT SANALA LAKE

Sr No. Description Unit Quantity Rate Amount

DEWATERING AND FILLING OF LAKE

Dewatering by pumping set of required capacity

including temporary platform carting, pumping

at site and fixing the same in position including

1 all accessories, and fuel and labour etc. 1800 HP/hr ₹18.32 ₹32,976.00

complete. Pump set of capacity

Providing and laying non-woven geotextile of

approved make and minimum mass 450 g/m²

over the prepared lake bed, including supply of

rolls, handling, spreading, aligning, overlaps not

less than 300 mm, stitching/welding of joints,

anchoring with sandbags or pins, and ensuring

2 protection of the geotextile during and after 2149 SqM ₹210.00 ₹451,290.00

installation. The item includes all labour, tools,

plants, consumables, jointing materials,

temporary arrangements, and quality control

testing as directed by the Engineer-in-Charge,

Providing and laying rubble for appron (each

stone weighting not less than 40Kg.) including

and packing and filing in the interestices with

Supply & Laying of Corse Sand

Supply & Laying of Hard Murrum

Rolling and consolidation using vibratory road

roller 8 - 10 tonne capacity (incl. watering)(A)

Earth work (layer not

exceeding 200mm thickness)

Providing, constructing and maintaining

temporary earthen / sandbag coffer dam to

isolate working area, using approved impervious

earth / sand-filled gunny bags / murum,

including placing, ramming, dressing, making

7 bund of required height and width, providing 8795 CuM ₹900.00 ₹7,915,500.00

and fixing 125–250 micron plastic lining /

geotextile as required to prevent seepage,

including all labour, machinery, diversions, and

shoring, complete in all respects as directed.

Dismantling and removing the earthen /

sandbag coffer dam after completion of

construction, including disposal of materials,

dressing of area, and restoring site to original

condition, complete as directed.

Providing and laying non-woven geotextile of

approved make and minimum 300 g/m² mass

per unit area over the prepared lake bed

including supply of rolls, handling, spreading,

aligning, overlapping not less than 300 mm,

stitching/welding of joints, anchoring with

sandbags or pins as required, and complete

protection of the geotextile during installation.

The work shall include provision of all labour,

tools, plant, temporary arrangements, and

quality control as directed by the Engineer-in-

Charge, complete

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

10 materials and disposing off the excavated stuff 1025 CuM ₹121.72 ₹124,763.00

upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

11 complete excluding cost of formwork in (A) 103 CuM ₹3,064.60 ₹315,653.80

Foundation and Plinth

CC work M25 for RCC Bottom slabusing

aggregate of size 10-20 mm, centring, curing,

12 finishing etc. complete (without reinforcement) 153 CuM ₹5,350.00 ₹818,550.00

Supply & Laying of Hard Murrum

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost

of formwork an reinforcement for reinforced

concrete work in (B) Walls, from top of

foundation level upto floor two level

Providing formwork of ordinary timber planking

so as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor

to ceiling not exceeding 4 M. and removal of the

15 same for in situ reinforced concrete and plain 1837 SqM ₹244.76 ₹449,624.12

concrete work in. (C) Vertical surface such as

walls (any thickness) partitions and the like

including attached buttresses & string course &

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

16 placing in position complete upto floor two level 49500 Kg ₹76.52 ₹3,787,740.00

Finishing wall with water proofing cement paint

of on wall surfaces (Two coats) to give an

approved brand and manufacture and of

17 required shape even shade after thoroughly 1423 SqM ₹60.20 ₹85,664.60

brushing the surface to remove all dirt and

remains of loose powered materials.

Providing 20mm thick cement plaster in single

coat on single or half brick walls for interior

18 plastering upto floor two level 1059 SqM ₹228.22 ₹241,684.98

and finished even and smooth in (i) Cement

mortar 1:3 (1- cement:3-sand)

WALKWAY & SEATING

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

19 materials and disposing off the excavated stuff \ 1006 CuM ₹121.72 ₹122,450.32

upto 50 Meter lead.(A) Loose or soft soil

Construction of granular sub-base by providing

close graded material, mixing in a mechanical

mix plant at OMC, spreading in uniform layers

with motor grader on prepared surface and

compacting with vibratory power roller to

achieve the desired density complete (Grade-I)

Supplying, laying and fixing non-woven

polypropylene geotextile fabric of minimum

150–200 GSM beneath red soil/murum pathway

over prepared GSB surface, including surface

cleaning, proper overlapping (minimum 300 mm

at joints), anchoring with U-pins/staples,

trimming, protection during subsequent layer

placement and complete as per specifications

and engineer’s direction

Providing, laying, watering and mechanically

compacting approved quality lateritic murum

having Plasticity Index not exceeding

maximum particle size 40 mm, free from organic

matter, laid in layers not exceeding 150 mm

22 loose thickness, moisture-conditioned and 279 CuM ₹1,350.00 ₹376,650.00

compacted to minimum 95% Modified Proctor

Density, dressed to required line, level and

camber over prepared subgrade, complete as

directed by Engineer-in-Charge.

Providing, laying, watering and compacting

approved quality red soil free from organic

matter, stones and debris, having clay content

not exceeding 25%, maximum particle size

mm, laid as top wearing course only over

23 prepared murum base in uniform thickness, 140 CuM ₹1,300.00 ₹182,000.00

compacted using plate compactor/light roller to

achieve firm and even surface, dressed to

required line and level, complete as directed by

Engineer-in-Charge

Supplying and applying eco-friendly organic soil

stabilizer / natural polymer binder (lignin-based

/ enzyme-based / plant-derived), non-toxic, non-

cementitious and water soluble, conforming to

ASTM D4609 / IRC SP-89 guidelines, compatible

with red soil / murum, applied by dilution in

potable water and mixed uniformly with top

24 75–100 mm soil layer, improving CBR, cohesion 1858 SqM ₹300.00 ₹557,400.00

and erosion resistance, reducing dust and

surface ravelling, executed as per

manufacturer’s specifications including curing,

complete as directed by Engineer-in-Charge

Providing and laying brick kerbing along

walkway edges using first class burnt clay bricks

(230×110×75 mm) laid to required line, level

and curvature in cement mortar 1:3, including

jointing, necessary cutting, alignment, ramming,

curing and finishing complete as directed by

Engineer-in-Charge

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

26 complete excluding cost of formwork in (A) 133 SqM ₹3,064.60 ₹407,591.80

Foundation and Plinth

CC work M-25 for RCC footing using aggregate

of size 10-20 mm, centring, curing, finishing etc.

complete (without

CC work M-25 for Beam using aggregate of size

10-20 mm, centring, curing, finishing etc.

complete (without reinforcement)

CC work M-25 for Column using aggregate of

size 10-20 mm, centring, curing, finishing etc.

complete (without reinforcement)

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

placing in position complete upto floor two level

Brick work using common burnt clay building

bricks having crushing strength not less than

31 kg./Sq.Cm. in foundation and plinth in Cement 156 CuM ₹4,550.60 ₹709,893.60

Mortar 1:5. (1- Cement : 5 -fine sand) (A)

Extra for brick work in superstructure above

plinth level upto floor two level (A) Modular

Decorative Malhar Plaster Work of 8mm thick in

proportion of 1:1.5 as specification and design

33 with Groove and Base Coat 15mm thick in 277 SqM ₹382.00 ₹105,814.00

proportion of 1:3

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1

34 Cement : 4 coarse sand) in rough finishing and 8 413 SqM ₹281.14 ₹116,110.82

mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

Water Proofing Treatment on Terrace and Wall

sides with smooth finishing including material-

35 labour etc. complete 473 SqM ₹121.00 ₹57,233.00

Apex Color work on Outer side of Wall (Two

36 coats) (with Base Coat) 946 SqM ₹115.00 ₹108,790.00

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

Providing, fabricating and installing decorative

jali panels made from 3 mm thick MS sheet, CNC

laser-cut as per approved design, including

cutting, edge finishing, bending (if required),

welding to MS framing (40×20 mm / 25×25 mm

or as specified), surface preparation, anti-rust

38 primer, exterior-grade powder coating of 676 SqM ₹3,650.00 ₹2,467,400.00

approved shade, transportation, scaffolding,

anchoring with approved fasteners, alignment

and complete installation at site as per drawings

and engineer-in-charge

CC work M-25 for Stair Caseusing aggregate of

size 10-20 mm, centring, curing, finishing etc.

complete (without reinforcement)

Site clearance - include complete clearing of the

designated site area prior to commencement of

construction or landscaping activities. It

comprises removal of unwanted vegetation,

grass, shrubs, small trees, roots, stumps, debris,

rubbish, top organic soil up to specified depth,

and any other objectionable matter that may

interfere with further works. All materials

40 unsuitable for reuse shall be collected, carted, 2496 SQM ₹100.00 ₹249,600.00

and disposed of at approved locations beyond

the project site, in accordance with

environmental guidelines. Usable material, if

any, shall be stacked neatly as directed. The

surface shall be left clean, levelled, and ready for

setting out, excavation, or subsequent

construction activities.

Providing, fabricating, supplying and erecting

heritage style ornamental mild steel (MS) main

gate comprising heavy MS flats, rounds and

square bars with hand-forged decorative scrolls,

vertical pickets, stiffeners and ribs, complete

with MS box section frame, concealed stiffeners,

heavy-duty hinges, stopper, locking

41 arrangement, all welding, grinding, surface 41 SqM ₹12,500.00 ₹512,500.00

preparation, hot-dip galvanizing (optional if

specified), zinc-rich primer and two coats of

exterior PU paint, including fixing on prepared

RCC pedestals, alignment, testing and

commissioning complete as directed by

Engineer-in-Charge

TOTAL AMOUNT ₹32,300,720.18

TOTAL AMOUNT ₹32,300,720.18

GARDEN & PLANTATION

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

42 materials and disposing off the excavated stuff \ 736 CuM ₹121.72 ₹89,585.92

upto 50 Meter lead.(A) Loose or soft soil

Supply of sediment soil for garden(with laying

Desi shade fertilizer supply work

45 Supply & laying of NPK Fertilizer 258 Kg ₹ 600 ₹

Mulch (50 mm) - Provision of organic/inorganic

mulch layer of 50 mm uniform thickness,

including surface cleaning, levelling, and

preparation of planting beds, supply and cartage

of approved mulch material on site, spreading

to achieve specified thickness, compacting

lightly, making allowance for plant stems,

46 finishing edges neatly, watering after application 70 CuM ₹3,000.00 ₹210,000.00

if required, disposal of excess material, and

maintaining the area during establishment, all

labour, materials, equipment, and incidental

charges as per specifications and directions

complete in all respects.

Supply of carpet lawn

Plantation work in the garden, including lawn,

48 flower beds, hedges, etc. (without materials) 1881 SqM ₹ 20 ₹

Digging pits of size 0.45 m × 0.45 m × 0.45 m

and carrying out plantation work

Providing healthy, well-grown sapling of

approved species

50 Coral Tree (Erythrina) 15 Nos. ₹ 850 ₹

51 Neem Tree 20 Nos. ₹ 600 ₹

52 Bamboo (clumping variety) 15 Nos. ₹ 900 ₹

53 Amrood (Guava) 15 Nos. ₹ 700 ₹

54 Papaya 15 Nos. ₹ 450 ₹

55 Amaltas 15 Nos. ₹ 1,000 ₹

56 Kachnar 18 Nos. ₹ 1,000 ₹

57 Pink Cassia 15 Nos. ₹ 950 ₹

58 Spathodea (African Tulip) 15 Nos. ₹ 850 ₹

59 Pink Cassia 12 Nos. ₹ 800 ₹

60 Akash Neem (Melia dubia) 17 Nos. ₹ 750 ₹

61 Ficus (religiosa/benghalensis) 15 Nos. ₹ 900 ₹

SHRUBS/ORNAMENTAL

62 Bougainvillea 50 Nos. ₹ 300 ₹

63 Ixora Duffy 45 Nos. ₹ 250 ₹

64 Jasmine 65 Nos. ₹ 300 ₹

65 Cordyline 40 Nos. ₹ 350 ₹

66 Liriope 35 Nos. ₹ 180 ₹

67 Thyme 80 Nos. ₹ 120 ₹

FLOWERING/GROUND COVERS

68 Spider Lily 50 Nos. ₹ 250 ₹

69 Rain Lily 150 Nos. ₹ 90 ₹

70 Moss Rose 100 Nos. ₹ 60 ₹

71 Vinca (Sadabahar) 130 Nos. ₹ 60 ₹

72 Water Lily 80 Nos. ₹ 550 ₹

73 Lotus 40 Nos. ₹ 750 ₹

74 Water Hyacinth 250 Nos. ₹ 75 ₹

75 Water Poppy 50 Nos. ₹ 550 ₹

Providing and fixing screw down bib taps of

76 following size.(B) Brass chromium plated screws 15.00 Each ₹ 184.98 ₹

down Bib Tap. (i)15mm dia.

Providing and fixing screw down bib taps of

77 following size.(B) Brass chromium plated screws 15.00 Each ₹ 212.68 ₹

down Bib Tap.(ii) 20mm dia.

Providing and fixing pillar tap, capstan head,

78 screw downhigh pressure with screws, shanks 8.00 Each ₹ 305.67 ₹

and back nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks

and back nuts. (ii) 20mm dia.

Providing and fixing brass screw down stop

80 tap.(A) 15mm dia. 15.00 Each ₹ 203.79 ₹

Providing and fixing brass screw down stop

81 tap.(B) 20mm dia. 15.00 Each ₹ 221.59 ₹

Providing and fixing ball cock of approved.

82 quality as directed.(A) Copper Metal (i) 25mm 3.00 Each ₹ 131.57 ₹

Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

83 shall be concealed as directed including 500.00 Rmt ₹ 71.93 ₹

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all

Providing laying and jointing in true line and

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

84 shall be concealed as directed including 250.00 Rmt ₹ 90.93 ₹

necessary fittings etc. including testing of pipe

and joints and fixing

the same with adhesive solvent, including cost

Providing laying and jointing in true line and

level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

85 shall be concealed as directed including 200.00 Rmt ₹ 117.97 ₹

necessary fittings etc. including testing of pipe

and joints and fixing

the same with adhesive solvent, including cost

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 75 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good

Providing & Fixing Brass cock screw down bolt

type 15mm dia. fitting with fixing.

flushing valve brass cromium platted push cock

of handle type with flushing supply and fixing

Brass wheel valve 50mm dia. fitting with fixing.

Brass wheel valve 40mm dia. fitting with fixing.

Brass wheel valve 25mm dia. fitting with fixing.

Chini gully trape approved quality supply with

fitting and C.I. jali requaire size with fitting

Nahni trape 7.6cm of PVC fitting and fixing

Providing erecting and fixing double coated ISI

water tank of required capacity each with all

necessary fittings and connection etc. complete

SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of 1/2" Pop up

Connecting Swing joint Assembly , 12" Length .

The tubing shall be made of polyetylene having

wall thickness of 2.3mm ,a working pressure of

5.5 kg/cm2 at 43oC and a surge pressure of

96 kg/cm2. Flex pipe textured for wet 50 Nos ₹250.00 ₹12,500.00

conditions.The fittings shall be made of UV

resistant thermo plastic etc., complete, as per

the instructions of Architect/Landscape

Architect/Engineer In Charge..SA Series.

Drip emitters - Supply and installation of drip

emitters suitable for the specified irrigation

system, with flow rates typically of 4 to 8 liters

per hour as per design. Emitters shall be

compatible with the lateral drip lines and

conform to IS standards, providing uniform

water distribution and clog resistance. Work

97 includes fixing emitters at specified spacing, 1000 Nos ₹40.00 ₹40,000.00

connecting to lateral lines securely, pressure

testing, flushing, and commissioning. All

materials, labor, tools, and incidentals for

complete installation as per specifications and

instructions are included

Pop-up sprinklers (lawn) - Supply, installation,

testing, and commissioning of pop-up sprinklers

suitable for lawn irrigation, including plastic

body sprinkler heads with adjustable arc (50 to

360 degrees), radius of throw 14 to 16 meters,

operating pressure 2.8 to 4 kg/cm², flow rates

98 around 3.2 to 4.3 m³/hr, and water-lubricated 35 Nos ₹2,500.00 ₹87,500.00

gear drive for smooth rotation. This includes

supply of swing joints, control valves, filter units,

valve boxes, and related fittings, along with all

labor, materials, excavation, backfilling, and

commissioning as per specifications.

Solenoid valves / zone valves - Supply and

installation of solenoid valves (zone valves)

suitable for automatic irrigation systems,

operating on 24 VAC with compatible inrush and

holding current ratings. Valves shall be

corrosion-resistant, pressure rated (15 to

psi), and compatible with controllers. The work

99 includes mounting valves on pipeline, electrical 10 Nos ₹4,000.00 ₹40,000.00

wiring to control panel, pressure regulation if

required, manual bleed operation, testing, and

commissioning. All materials, labor, and

accessories such as valve boxes and conduit for

wiring are included as per specifications.

TOTAL AMOUNT ₹180,000.00

TOTAL AMOUNT ₹180,000.00

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of

the standard design and also have

corresponding standard diameter as per length

including collar joint in it, all taxes, insurance,

transportation, loading along with unloading

and reaching the

store or site and carrying out necessary

100 inspections along with providing supply work 456 Rmt ₹976.00 ₹445,056.00

and required hemp, wata (from CM. 1:1) and

also line level. And complete including lying,

jointing, curing with required hemp in grades.

for pipe of NP - 3 class of 300 m.m. dia.for Only

supply And Fixing work

Drainage house connection should construction

either ( square / round ) withg brick masonry

type ( 0.50m* 0.50m) in which the bottom

should be of CC 1:3:6 with brick masonry 1:4

cum plaster 1:3 cm coping CC 1:1:2 and also

101 benching around it with 1:2:4 should be done 2 NOS ₹2,742.00 ₹5,484.00

with finishing,curing and fixing frame cover.

(excluding excavation or suplly of frame cover)

(More than 0.45 meter and up to 0.60 meter

Manhole 1.20m/0.90m size 1.20m deep with

exavation cement concrete 1:2:4 brick

meassonary 1:6 0.30mm thick, foundation

102 cement plaster 1:3, benching 50mm thick, IPS 5 NOS ₹7,551.00 ₹37,755.00

1:2:4, top 15cm thick CC copping 1:2:4 with

quaring finishing (without cover plate)

iron work as per instruction for valve chamber

Supply and Fixing of RCC Precast Circular

104 Manhole Frame and Cover 20 ton capacity. 5 Each ₹2,685.00 ₹13,425.00

Providing & laying weep hole in Aburtments,

and returns by using A.C. pipe of 100mm

105 including laying in proper grede and jointing the 91.00 Each ₹ 85.84 ₹

completed as per detailed specification.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth

106 continuity of following type, erected on PVC / 25 Pt ₹445.00 ₹11,125.00

Metallic box, single mounting base frame

covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder /ceiling

rose / H.D.Connector as directed.(a) with

medium class Rigid PVC pipe and accessories

[II] For 6/16A Plug with 16A Switch & 2-2.5

107 sq.mm Cu. Wire (a) with medium class Rigid PVC 10 Nos. ₹704.00 ₹7,040.00

pipe and accessories Cat. III

Point wiring for Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic box, single mounting base frame

108 covered with textured / metallic front plate 10 Nos. ₹255.00 ₹2,550.00

modules erected on / in wall / ceiling with

following type accessories Cat. III

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b)

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check- nuts etc. complete of following

sizes.(2) 25 mm

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in

following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC

pipe and accessories (a) 2 wire 1.5 sq. mm

(b) 2 wire 2.5 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables. (A)

core 2.5 Sq. mm

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables (A)

Solderless crimping type Copper lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

116 connected to switchgear terminals with 250 Nos ₹6.00 ₹1,500.00

brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 120 to 300 V,Power Factor more

than 0.9, THD < 10 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

117 efficiency- 110 lumens/watt LED driver 15 Nos. ₹370.00 ₹5,550.00

efficiency > 85 % CREE / OSRAM / PHILIPS

Lumileds / NICHIA / SEOUL/Bridgelux make LED

used for luminaire. ( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet. Cat-III

(B) LED Lamps Integral type, Cool White with PC

118 diffuser Suitable for B22 LAMP holder (b) 5 to 8 15 Nos. ₹111.00 ₹1,665.00

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate

119 nos. of MCBs.(The DBs should be used of same 4 Nos. ₹3,379.00 ₹13,516.00

company of MCB to be used) (B) three phase

incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet

steel double door (iii)8 way

Providing & erecting 240 V MCB double pole

switch for lighting Load (C Curve) having 10 KA

120 breaking capacity & confirms to IS : 8828 in 4 Nos. ₹297.00 ₹1,188.00

existing box having following capacity (A) 6 to

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

121 breaking capacity & confirms to IS :8828 in 4 Nos. ₹590.00 ₹2,360.00

existing box having following capacity (a) 6 to

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having

122 characteristic of quick action & tripping with all 4 Nos. ₹1,950.00 ₹7,800.00

advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (i) 25 Amps.DP Cat. III

SWITCHGEAR & DISTRIBUTION BOARD

providing and erecting Miniature circuit breaker

single pole 0.5A to 2A system and having

123 breaking capacity 10 KA to be erected in 10 Ea. ₹268.00 ₹2,680.00

existing box. confirming to IS 8828/1996 with ISI

EXTERNAL LIGHTING

Providing, supplying, transporting, erecting,

testing and commissioning 5.0 metre high

decorative LED pole light complete in all

respects, made from GI tubular pole (114 mm

OD bottom section – 2.0 m & 76 mm OD top

section – 3.0 m) with PP powder-coated finish,

fitted with aluminium post-top LED luminaire of

500 mm diameter, equipped with 100 Watt LED

module using high-efficiency LED chips and

124 electronic driver, including base plate 50 Nos. ₹12,500.00 ₹625,000.00

200×200×8 mm thick, 600 mm long 12 mm dia J-

type foundation bolts with nuts & washers,

internal wiring with MCB and connector strip,

complete installation, alignment, electrical

connections, testing and commissioning at site,

including all materials, labour, tools, tackles and

incidentals, as directed by Engineer-in-Charge.

Supplying and erecting approved make

Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement

for cable termination to be erected With

125 Suitable foundation (Included) as per details 10 Ea. ₹5,501.00 ₹55,010.00

given by manufacturer considering site

requirement. (B) 4 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16

Bolts and 450mm long with necessary G.I. J

Bolts .Approx weight 37 kg

Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of

cm/require outside dia. complete with suitable

B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm

/ required size of pole top having sufficient

fasteners for fixing the brackets and having

126 spread of 1.5.mtr. length with 110 deg.with 10 Ea ₹620.00 ₹6,200.00

vertical plane & suitable welded stays, reducer

and with check nuts complete painted with one

coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with

following nos of arms [A] Single Arm Bracket

Supplying & erecting approved make SMC press

moulded composite FRP . loop-in, loopout

approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per

127 requirement having locking arrangements with 10 Ea ₹890.00 ₹8,900.00

mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps&

earth bolt of following size of box.(a) 300mm x

200mm x 100mm [deep]

Providing and erecting iron clad cable route

marker duly marked with ELE.CABLE of size

128 cm.X 12 cm. Flushed with ground in cement 4 Ea ₹238.00 ₹952.00

foundation as directed by Engineer in charge.

Supplying and erecting B class Galvanized iron

pipe having smooth finished bore of the pipe on

both ends erected nuts and bolts along the pole

/ wall shaping the pipe as per site requirement.

Pipe dia as following.(a) 25 mm dia

Providing 1:2:4 cement concrete foundation &

70 % PCC from bottom including excavation for

the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

manner.( for 4 & 6 mtr pole)

Supplying and erecting LED street light / Flood

light fittings with High power White LEDs

wattage of 1Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt .

131 LED driver efficiency > 85 %.CREE /OSRAM / 10 Ea ₹4,948.00 ₹49,480.00

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux

(U.S.A.) make LED used for luminaire. ( fittings

required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-

65), Surge protection - 4KV integral and 10 kv

non integral ,Light must have 440VAC line

supply protection. It should withstand 48 hours

for 440VAC line supply.(e) above 48 to

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from jointless

M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work

uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally

supported on both side,with internal and

outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two

132 Nos. one is welded and other with nut and bolt 10 Ea ₹1,866.00 ₹18,660.00

for erecting Bakelite sheet. Painting the Section

Pillar inside and out side with three tank powder

coated paint. section pillar roof should be

without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated

from 16 Gauge MS Sheet with angle iron legs

45 cm long made from 35 X 35 X 5 mm thick

Supplying & erecting approved make Digital

time switch having lithium cell 6 years operative

and operate battery backup 1 channel day clock

with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time

133 minimum & LCD display. Also comprised 3 Ea ₹ 3,137 ₹

permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as

required with necessary connection erected as

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium

pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in

aluminium casted body with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %

( fitting required LM-79 & LM-80Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity

between the ranges shown.)

(E) Under Water Light,12V DC including

Driver,IP-67 with die-cast/deep drawn housing

with impact resistance clear toughened glass. (ii)

12 watts CAT II

CABLES AND WIRES

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (B) 4 core 25 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

136 necessary clamps or in existing trench / pipe of 95 Mtr ₹529.00 ₹50,255.00

following size of cables (F) 3 1/2 core 120 Sq.

mm ( 70 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured

137 cable complete with out going tails, insulating 110 Ea. ₹139.00 ₹15,290.00

tape etc for following size of cables. (E) 3 & 1/2

core 120 Sq. mm

Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of cables.(C) 3 & 1/2

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

139 connected to switchgear terminals with 180 Ea. ₹25.00 ₹4,500.00

brass/cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

140 connected to switchgear terminals with 140 Ea. ₹45.00 ₹6,300.00

brass/cadmium plated nut bolts in an approved

manner. (G) 120 Sq.mm.

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

141 over the run and back filling the same and 456 Mtr. ₹46.00 ₹20,976.00

making the surface as normal ground.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

142 necessary clamps or in existing trench / pipe at 60 Mtr. ₹267.00 ₹16,020.00

road crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

(E) 3 core 2.5 Sq. mm

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200- 250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover.(approved make OEM has

144 to submit test certificate) & having back filling 5 Ea. ₹10,489.00 ₹52,445.00

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 • / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound

should be capable to retainmoisture for long

time Necessary test report must be

submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e

independent (c) For Electrical Installation

covering Transformer Neutrals, Lightning

Providing and erecting Pipe type earthing with

40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed (For panel)

For using salt and charcoal / coke as required for

pipe type earthing.

Providing one bag of 25 Kg. Additional Back

147 Filling Compound (BFC) suitable for safe 60 Ea. ₹700.00 ₹42,000.00

earthing device.

Providing and erecting required size Copper

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc. using

Providing & erecting open well type horizontal

mono block pump set with stainless steel body

having following specification

(C) 1 H.P. single phase open well motor pump

set suitable for 185 LPM discharge @ 25 mtr.

head, suitable for 32 mm dia. Delivery pipe with

control panel. CAT II

Providing and erecting Two way Centre off Four

pole MCB Change Over Switch (IS 13947-3 / IEC

60947-3) in existing box. (b) for 40 Amp Cat.III

Supplying & erecting approved make Automatic

liquid level controller 6A.as per instruction of

Engineer in charge on site complete with wiring

connection with existing wires , with copper

151 conductor from pump to upper and lower 2 Ea ₹2,332.00 ₹4,664.00

tank.(Size Not less than 1.5 Sq MM) from pump

to upper and lower tank with ISI marked Rigid

Supply, installing, testing and commissioning 24-

Chanel Video/Audio Recording Network Video

Recorder, Total 480/400 fps (NTSC/PAL), PTZ

152 Control, Time synchronization between NVR and 2 Nos. ₹35,000.00 ₹70,000.00

time server or other NVR as per instruction by

Supply, installing, testing and commissioning of

1.3 Mega pixel Dome Camera 1/3" CMOS

sensor, 20m IR distance, IP 66, PoE, IPv4/IPv6,

ONVIF ver 2.0 with neccesary power supply

arrangment suitable for indoor ceiling/surface

mounted type as per instruction by

EIC/Consultant.

Supply, installing, testing and commissioning of

1.3 Mega pixel bullet Camera 1/3" CMOS

sensor, 20m IR distance, IP 66, PoE, IPv4/IPv6,

ONVIF ver 2.0 with neccesary power supply

arrangment suitable for indoor ceiling/ surface/

wall/ column mounted type as per instruction

by EIC/Consultant.

Supply, installing, testing and commissioning of

155 8 chanel POE switch as per instruction by 6 Nos. ₹8,000.00 ₹48,000.00

Supply, installing, testing and commissioning of

central management software for Viewing, multi-

NVR management, suppoerting all cameras at

one single screen and maximum devices

management, auto search configuration and

status monitoring as per instruction by

EIC/Consultant.

Supply, installing, testing and commissioning of

8 TB video surveillance hard disk as per

instruction by EIC/Consultant.

Supply, installing, testing and commissioning of

24U rack as per instruction by

Supply and connection of 40" LED Monitor as

per instruction by EIC/Consultant

Supply, installing, testing and commissioning of

CAT-6 cable for computer socket outlets from

data switch to computer point laid through

raceways/conduits/floor trunks etc. With

160 required termination arrangment to complete 692 Mtr. ₹42.00 ₹29,064.00

the job.(Rates of raceways/conduits/floor trunks

shall be excluded.

TOTAL AMOUNT ₹2,589,303.00

TOTAL AMOUNT ₹2,589,303.00

MORBI MUNICIPAL COPORATION

BANDHKAM SHAKHA

PHASE-2 (ROAD & INFRASTRUCTURE DEVELOPMENT) SUMMARY SHEET

Name of Work - BEAUTIFICATION OF SAKHAT SANALA LAKE

Sr No. Description Amount

1 CIVIL WORK ₹17,249,932.39

2 SCULPTURES & PAVILION ₹2,781,834.97

3 URBAN FURNITURE ₹1,585,000.00

4 DRAINAGE ₹5,708,966.00

5 ELECTRIC WORK ₹4,074,021.00

TOTAL AMOUNT ₹31,399,754.36

TOTAL AMOUNT ₹31,399,754.36

MORBI MUNICIPAL COPORATION

BANDHKAM SHAKHA

PHASE-2 (ROAD & INFRASTRUCTURE DEVELOPMENT) SCHEDULE - B

Name of Work - BEAUTIFICATION OF SAKHAT SANALA LAKE

Sr No. Description Unit Quantity Rate (INR) Amount (INR)

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead &

lift.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead &

lift.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead &

lift.(C) Hard Murrum

Earthwork for embankment including breaking clods,

dressing with all lead and lift and including watering

rolling and consolidation of subgrade in layers at

4 O.M.C. to required dry density including filling the 1377 CuM ₹164.89 ₹227,053.53

depression which occur during the process using

power roller 8T to 10T.(C) From Borrow area all lead

Construction of granular sub-base by providing close

graded material, mixing in a mechanical mix plant at

OMC, spreading in uniform layers with motor grader

on prepared surface and

compacting with vibratory power roller to achieve the

desired density complete (Grade-I)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

6 aggregates 40 mmnominal size) and curing complete 865 CuM ₹3,064.60 ₹2,650,879.00

excluding cost of formwork in (A) Foundation and

Providing, laying, spreading and compacting graded

stone aggregate to wet mix macadam specification

including premixing the Material by tipper to site,

7 laying in uniform layers with paver in sub-base / base 459 CuM ₹1,008.00 ₹462,672.00

course on well prepared surface and compacting with

vibratory roller to achieve the desired density

Cement Concrete Pavement M-35**Construction of

un-reinforced, dowel jointed, plain cement concrete

pavement over a prepared sub base with 43 grade

cement @ 380 kg per cum, coarse and fine aggregate

conforming to IS 383, maximum size of coarse

aggregate not exceeding 25 mm, mixed in a batching

and mixing plant as per approved mix design,

transported to site, laid with a fixed form or slip form

8 paver, spread, compacted and finished in a 689 CuM ₹5,626.00 ₹3,876,314.00

continuous opeproportion including provision of

contraction, expansion, construction and longitudinal

joints, joint filler, separation membrane, sealant

primer, joint sealant, debonding strip, dowel bar, tie

rod, admixtures as approved, curing compound,

finishing to lines and grades as per drawing

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M200 grade concret as per

9 approved design and including excavation for fixing in 4061 Rmt ₹396.90 ₹1,611,810.90

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and laying Beige Sandstone Cobble Stone

flooring of nominal 60 mm thickness with natural split

finish, laid over prepared sand/stone dust bedding,

including proper alignment, leveling, joint filling with

polymeric sand or approved jointing material, surface

10 compaction, cleaning, and application of penetrating 4053 Sqm ₹1,500.00 ₹6,079,500.00

stone sealer, complete in all respects for outdoor

footpath use as per drawings, specifications, and

direction of Engineer-in-Charge

Site clearance - include complete clearing of the

designated site area prior to commencement of

construction or landscaping activities. It comprises

removal of unwanted vegetation, grass, shrubs, small

trees, roots, stumps, debris, rubbish, top organic soil

up to specified depth, and any other objectionable

matter that may interfere with further works. All

11 materials unsuitable for reuse shall be collected, 8637 SQM ₹100.00 ₹863,700.00

carted, and disposed of at approved locations beyond

the project site, in accordance with environmental

guidelines. Usable material, if any, shall be stacked

neatly as directed. The surface shall be left clean,

levelled, and ready for setting out, excavation, or

subsequent construction activities.

TOTAL AMOUNT ₹17,249,932.39

TOTAL AMOUNT ₹17,249,932.39

SCULPTURES & PAVILION

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff \ upto 50 Meter

lead.(A) Loose or soft soil

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

13 aggregates 40 mmnominal size) and curing complete 17 SqM ₹3,064.60 ₹52,098.20

excluding cost of formwork in (A) Foundation and

CC work M-25 for RCC footing using aggregate of size

10-20 mm, centring, curing, finishing etc. complete

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level

Supply & Laying of Hard Murrum

Providing and fixing concealed base arrangement for

freestanding sculptural MS poles comprising 10–12

mm thick MS base plate welded to pole, M12/M16

anchor bolts with nuts and washers, levelling and

17 grouting with non-shrink grout, corrosion protection 108 Each ₹4,500.00 ₹486,000.00

to embedded steel parts and finishing with concealed

cover plate/collar complete in all respects as per

drawings and direction of Engineer-in-Charge

Providing, fabricating, supplying and erecting

freestanding sculptural Mild Steel vertical poles made

from MS hollow sections of approved diameter and

thickness, measured in running meter of height,

18 including cutting, welding, grinding, surface 130 Rmt ₹1,500.00 ₹195,000.00

preparation, zinc-rich primer and two coats of

PU/epoxy paint of approved shade, complete as per

drawings and direction of Engineer-in-Charge.

Design, fabrication, supply and installation of abstract

vertical GFRC sculptural elements of varying heights

with smooth textured finish, internal MS frame,

protective sealant coating and complete in all

respects as per approved drawings

CC work M-30 for Column using aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

(without reinforcement)

CC work M-30 for Beam using aggregate of size 10-20

mm, centring, curing, finishing etc. complete (without

CC work M25 for RCC slab using aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

(without reinforcement)

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

23 formwork and reinforcement for reinforced concrete 15 CuM ₹4,636.68 ₹69,550.20

work in (B) Walls, from top of foundation level upto

floor two level

Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping and

centering below

24 supporting floor to ceiling not exceeding 4 M. and 96 SqM ₹244.76 ₹23,496.96

removal of the same for in situ reinforced concrete

and plain concrete work in. (C) Vertical surface such

thickness) partitions and the like including attached

buttresses & string course & the like.

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

25 formwork and reinforcement for reinforced concrete 44 CuM ₹4,329.55 ₹190,500.20

work in (A) Foundations, footings, Base of columns

and Mass concrete.

Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and

centering below

26 supporting floor to ceiling not exceeding 4 M. and 141 SqM ₹178.61 ₹25,184.01

removal of the same for in situ reinforced concrete

and plain concrete work in. (A) Foundations Footings

Bases of Columns etc. and Mass concrete

TOTAL AMOUNT ₹2,781,834.97

TOTAL AMOUNT ₹2,781,834.97

URBAN FURNITURE

Design, manufacture, supply and installation of

premium outdoor litter bin of approx. 60–80 litre

capacity, comprising internal removable MS waste

container made from minimum 1.6 mm thick CRCA

sheet with powder-coated finish, enclosed with

vertical hardwood slats of minimum 25 mm thickness

27 fixed on MS frame, including laser-cut top cover with 30 Nos. ₹22,500.00 ₹675,000.00

waste opening, concealed hinges/handles, corrosion-

resistant fasteners, anti-termite treatment to wood,

exterior weather-resistant coating, complete in all

respects as per approved design and drawings

Design, manufacture, supply and fixing of straight

outdoor wooden bench of approx. 1.80 m length,

made entirely from seasoned and pressure-treated

hardwood (Sal/Teak approved), comprising solid

28 timber seat planks and wooden legs, fixed with 35 Nos. ₹26,000.00 ₹910,000.00

concealed stainless steel fasteners, including anti-

termite treatment and weather-resistant outdoor

oil/PU finish, complete in all respects as per approved

TOTAL AMOUNT ₹1,585,000.00

TOTAL AMOUNT ₹1,585,000.00

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto All lead and Lift

.(C) Hard Murrum

Providing and laying cement concrete 1:3:6 (1-

Cement : 3 coarse sand : 6- hand broken stone

30 aggregates 40 mmnominal size) and curing complete 118 Cum. ₹ 3,064.60 ₹361,622.80

excluding cost of formwork in (A) Foundation and

Providing bedding incl. ramming, watering, levelling,

consolidating etc. Complete as per standard and

31 instruction of engineer incharge 55 Cum. ₹ 329.00 ₹18,095.00

As above with required quality Sand brought from

outside inclduing all lead

Providing and supplying ISI Standard R.C.C. pipes(of

Sulphate Resisting Cement) in standard lengths of

following class and diameter suitable for either collar

joints or rubber ring joints including all taxes,

32 insurance, transportation, freight charges, octroi, 1098 Rmt ₹ 1,946.00 ₹2,136,708.00

inspection charges, loading, unloading, conveyance to

departmental stores, stackingetc. Class NP3 Test

Pressure 0.7 Kg/sq.cm 600 mm Dia.

Providing and supplying in standard length ISI mark

rigid unplasticised PVC pipes suitable for potable

water with ring fit joint including cost of rings, as per

IS specification no. 4985/1988 including all local and

33 central taxes, transportation, freight charges,octroi, 1100 Rmt ₹ 575.00 ₹632,500.00

inspectioncharges,loading,unloading,conveyance to

the departmental stores and including cost of jointing

meterial etc. complete.

Test Pressure 6 Kg/cm2 160mm dia

Lowering, laying and jointing R.C.C. pipes in C.M. 1:1

1/2 of following diameters in proper position, grade

and alignment at all level as directed by Engineer-in-

34 charge including conveyance from stores to site of 1098 Rmt ₹ 228.00 ₹250,344.00

work, labour,giving hydraulic testing as per ISI code.

Class NP2,NP3,NP4 600mm dia.

Lowering, laying, fixing and jointing PVC/uPVC/cPVC

pipes and specials of following class and diameter

including cost of conveyance from stores to site of

works including cost of labour,material, cement

solvent,giving satisfactory hydraulic testing as per ISI

Test Pressure 6 Kg/cm2 160mm dia

Providing and supplying at store or site of work incl.

freight, loading, unloading, stacking, insaurance & all

taxes etc. complete

P. V. C. Couplers 6 Kg/cm2 (Fabricated) 160mm

P. V. C. Tail Piece with P. V. C. Flange (ISI) Heavy duty

(Moulded) 160mm

Service Saddle 25 mm (Moulded) heavy 160mm

P. V. C. Tee (Moulded) 160 x 110 mm

P. V. C. Tee (Moulded) 160 x 160 mm

P. V. C. Elbow (Moulded) 160mm

P. V. C. Reducer (Moulded) 200 x 160 mm

P. V. C. Reducer (Moulded) 160 x 140 mm

P. V. C. Reducer (Moulded) 160 x 110 mm

P. V. C. Reducer (Moulded) 160 x 90 mm

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per

the type design in brick masonry in C.M.1:5 and inside

and outside 20mm thick plastering in C.M.1:3

necessary 100mm coping with reinforcement in

200 fixing C.I. steps and fixing manhole frame and

covers (But excluding supply of manhole frame and

covers)over manholes and house

connection chamber sand fixing Manhole covers (but

excluding supplying of manhole covers) over scraper

manhole etc. complete,

46 providing and fixing safety chain wherever necessary 10 Nos. ₹ 27,272.50 ₹272,725.00

as per the stipulations in the type design complete as

per latest CPHEEO manual.

(excl. excavation).

Manhole type "B" circular type having inside diameter

of minimum 1500 mm and for depth from 1.5 M to

4.0 M (for 150 mm to

Manhole type "B" as above but upto 1.5 M depth.

Extra depth beyond 1.5 mt to 2.00 mt.

(Up to 1.5 mt = 21116 + extra depth 0.5 mt

Providing and constructing rectangular brick masonry

chamber for house connection as per type design in

brick masonry in C. M. 1:3 including M-100 in

foundation M-150 in benching inside plastering in C.

47 M. 1:3 and outside plastering in C. M. 1:3 coping in 40 Nos. ₹ 7,922.00 ₹316,880.00

M200 and fixing RCC precast manhole frame and

covers, but Excl. supply of manhole and cover etc.

complete excl. excavation.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

48 exceeding 20 cm. in depth consolidating each 1149 Cum ₹ 135.56 ₹155,758.44

disposited layer by ramming and watering.

RCC precast M.H.Frame & Cover Manufacture, supply

& Delivery at store or at site of work precast RCC

M.200 Frame & cover suitable to drainage M.H. and

as per type design & Drawing including cost of

reinforcement M.S. Angles or Flat, curing mold work

Heavy Duty Frame suitable for 50cm opening of MH

Heavy Duty Cover suitable for 50cm opening of MH

House Connection Chamber light duty Frame

House Connection Chamber light duty Cover

Supply and provide 1 no. slotted (jali) manhole / drain

cover assembly comprising: cast / ductile iron slotted

grate plate (slots as per drawing), stiffening ribs,

welded frame seat, machined bearing surface for

flush seating, prime coat and bitumen or epoxy finish

for corrosion protection. Clear opening (net) = Ø

53 mm (or equivalent square 1500×1500 clear opening) 40 Nos. ₹ 9,500.00 ₹380,000.00

— supply complete, including fabrication, finishing

and delivery to site. (Frame and fixing bolts included).

Load class: medium-to-heavy duty (specify if

pedestrian only or heavy traffic).

TOTAL AMOUNT ₹5,708,966.00

TOTAL AMOUNT ₹5,708,966.00

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-

nuts etc. complete of following sizes.(2) 25 mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables. (A) 4 core 2.5 Sq. mm

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables (A) 4 core 10 Sq. mm

Solderless crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (A) 1.5/2.5 to 6 Sq.mm

SWITCHGEAR & DISTRIBUTION BOARD

providing and erecting Miniature circuit breaker

single pole 0.5A to 2A system and having breaking

59 capacity 10 KA to be erected in existing box. 20 Ea. ₹268.00 ₹5,360.00

confirming to IS 8828/1996 with ISI Mark Cat.III

EXTERNAL LIGHTING

Providing, supplying, transporting, erecting, testing

and commissioning 5.0 metre high decorative LED

pole light complete in all respects, made from GI

tubular pole (114 mm OD bottom section – 2.0 m &

76 mm OD top section – 3.0 m) with PP powder-

coated finish, fitted with aluminium post-top LED

luminaire of 500 mm diameter, equipped with

Watt LED module using high-efficiency LED chips and

60 electronic driver, including base plate 200×200×8 mm 100 Ea ₹12,500.00 ₹1,250,000.00

thick, 600 mm long 12 mm dia J-type foundation bolts

with nuts & washers, internal wiring with MCB and

connector strip, complete installation, alignment,

electrical connections, testing and commissioning at

site, including all materials, labour, tools, tackles and

incidentals, as directed by Engineer-in-Charge.

Supplying and erecting approved make Octagonal

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

61 cable termination to be erected With Suitable 20 Ea. ₹11,299.00 ₹225,980.00

foundation (Included) as per details given by

manufacturer considering site requirement. (E)

Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm

thickness with 225mmX225mmX16mm base plate,

4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 67 kg

Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top having

sufficient fasteners for fixing the brackets and having

62 spread of 1.5.mtr. length with 110 deg.with vertical 20 Ea ₹620.00 ₹12,400.00

plane & suitable welded stays, reducer and with

check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms [A] Single

Arm Bracket 1.5 Mtr

Supplying & erecting approved make SMC press

moulded composite FRP . loop-in, loopout approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

63 doors as per requirement having locking 20 Ea ₹890.00 ₹17,800.00

arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(a)

300mm x 200mm x 100mm [deep]

Providing and erecting iron clad cable route marker

duly marked with ELE.CABLE of size 23 cm.X 12 cm.

Flushed with ground in cement foundation as

directed by Engineer in charge.

Supplying and erecting B class Galvanized iron pipe

having smooth finished bore of the pipe on both ends

65 erected nuts and bolts along the pole / wall shaping 90 Mtr. ₹179.00 ₹16,110.00

the pipe as per site requirement. Pipe dia as

following.(a) 25 mm dia

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of

size 45 x 45 x 100 cm. Deep in below ground level

with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm)

high upper ground level with necessary curing and

finishing in approved manner.( for 4 & 6 mtr pole)

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

%.CREE /OSRAM / PHILIPS Lumileds / NICHIA /

67 SEOUL/ BridgeLux (U.S.A.) make LED used for 20 Ea ₹4,948.00 ₹98,960.00

luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection - 4KV integral and 10 kv non

integral ,Light must have 440VAC line supply

protection. It should withstand 48 hours for 440VAC

line supply.(e) above 48 to 60 Watts Cat-lll

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double

door internally supported on both side,with internal

and outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

68 one is welded and other with nut and bolt for 20 Ea ₹1,866.00 ₹37,320.00

erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated

paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962 (C) 60 X 30 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X

5 mm thick MS angle.

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

69 setup time 1 minimum & LCD display. Also comprised 6 Ea ₹ 3,137 ₹

permanent ON/OFF switching. Programming switches

& housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed.

CABLES AND WIRES

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

70 1.1 KV. to be laid on wall with necessary clamps or in 1098 Mtr ₹189.00 ₹207,522.00

existing trench / pipe of following size of cables (B)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (F)

1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

cables. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

cables.(C) 3 & 1/2 core 70 Sq. mm

Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (G) 120 Sq.mm.

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

77 necessary clamps or in existing trench / pipe at road 120 Mtr. ₹267.00 ₹32,040.00

crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

(E) 3 core 2.5 Sq. mm

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM

has to submit test certificate) & having back filling

79 compound of (B) Inner chemical (CCM Compound)- 2 Ea. ₹10,489.00 ₹20,978.00

Resistivity:- 0.2 • / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to

retainmoisture for long time Necessary test report

must be submitted.(c) For Electrical Installation

covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e

Providing andEarthing

erecting in normal

Pipe soil. Length

type earthing withof40

dia 2.5 mtr long 'B' grade G.I. pipe with necessary

80 coupling buch buried in specially prepared earth pit & 120 Ea. ₹815.00 ₹97,800.00

G.I. earth wire of 8 SWG erected & connected as

directed (For panel)

For using salt and charcoal / coke as required for pipe

Providing one bag of 25 Kg. Additional Back Filling

82 Compound (BFC) suitable for safe earthing device. 120 Ea. ₹700.00 ₹84,000.00

Providing and erecting required size Copper strip for

earthing of H.T. OCB / ACB/ Transformer, LT panel

board, Motors etc. using copper clamp.

Supply, installing, testing and commissioning 24-

Chanel Video/Audio Recording Network Video

Recorder, Total 480/400 fps (NTSC/PAL), PTZ Control,

Time synchronization between NVR and time server

or other NVR as per instruction by EIC/Consultant

Supply, installing, testing and commissioning of

Mega pixel Dome Camera 1/3" CMOS sensor, 20m IR

distance, IP 66, PoE, IPv4/IPv6, ONVIF ver 2.0 with

85 neccesary power supply arrangment suitable for 6 Nos. ₹6,000.00 ₹36,000.00

indoor ceiling/surface mounted type as per

instruction by EIC/Consultant.

Supply, installing, testing and commissioning of

Mega pixel bullet Camera 1/3" CMOS sensor, 20m IR

distance, IP 66, PoE, IPv4/IPv6, ONVIF ver 2.0 with

86 neccesary power supply arrangment suitable for 42 Nos. ₹6,000.00 ₹252,000.00

indoor ceiling/ surface/ wall/ column mounted type

as per instruction by EIC/Consultant.

Supply, installing, testing and commissioning of

87 chanel POE switch as per instruction by EIC/Consultant 6 Nos. ₹8,000.00 ₹48,000.00

Supply, installing, testing and commissioning of

central management software for Viewing, multi-NVR

management, suppoerting all cameras at one single

88 screen and maximum devices management, auto 1 Nos. ₹15,000.00 ₹15,000.00

search configuration and status monitoring as per

instruction by EIC/Consultant.

Supply, installing, testing and commissioning of 8 TB

89 video surveillance hard disk as per instruction by 3 Nos. ₹30,000.00 ₹90,000.00

EIC/Consultant.

Supply, installing, testing and commissioning of 24U

90 rack as per instruction by 2 Nos. ₹25,000.00 ₹50,000.00

Supply and connection of 40" LED Monitor as per

instruction by EIC/Consultant

Supply, installing, testing and commissioning of CAT-

6 cable for computer socket outlets from data switch

to computer point laid through

92 raceways/conduits/floor trunks etc. With required 1088 Mtr. ₹42.00 ₹45,696.00

termination arrangment to complete the job.(Rates of

raceways/conduits/floor trunks shall be excluded.

TOTAL AMOUNT ₹4,074,021.00

TOTAL AMOUNT ₹4,074,021.00

MORBI MUNICIPAL COPORATION

BANDHKAM SHAKHA

PHASE-3 (RECREATIONAL DEVELOPMENT) SUMMARY SHEET

Name of Work - BEAUTIFICATION OF SAKHAT SANALA LAKE

Sr No. Description Amount

1 FOOD COURT ₹8,487,249.08

2 CHILDREN'S PLAYGROUND ₹1,484,610.64

3 SHADED SEATING& GAZEBO ₹5,298,500.00

4 VIEW POINT & BOATING DECK & FLOATING BRIDGE ₹19,646,961.74

5 PLUMBING ₹219,713.30

6 DRAINAGE ₹512,620.00

7 IRRIGATION ₹302,007.50

8 ELECTRIC ₹2,330,074.00

TOTAL AMOUNT ₹38,281,736.26

TOTAL AMOUNT ₹38,281,736.26

MORBI MUNICIPAL COPORATION

BANDHKAM SHAKHA

PHASE 3 (RECREATIONAL DEVELOPMENT) SCHEDULE- B

Name of Work - BEAUTIFICATION OF SAKHAT SANALA LAKE

Sr No. Description Unit Quantity Rate Amount

Supplying and installing fully finished

premium designer food cabin (approx.

10’×8’×8’ H) with MS frame, multi-colour

designer ACP cladding, serving counter,

1 sliding toughened glass window, insulated 6 Each ₹280,000.00 ₹1,680,000.00

roofing, vitrified/vinyl flooring, complete

internal electrical fittings with LED signage

panel, delivered and installed complete as

Providing and placing powder-coated metal

outdoor table–chair set with 18–20 mm

granite tabletop and 4 metal chairs,

complete with weather-resistant coating,

anchoring provision and finishing as

Excavation for foundation upto 1.5 m

depth including sorting out and stacking of

3 useful materials and disposing off the 699 CuM ₹121.72 ₹85,082.28

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Providing and laying cement concrete 1:3:6

(1-Cement : 3- coarse sand : 6- hand

broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Construction of granular sub-base by

providing close graded material, mixing in a

mechanical mix plant at OMC, spreading in

uniform layers with motor grader on

prepared surface and compacting with

vibratory power roller to achieve the

desired density complete (Grade-I)

Providing, laying, spreading and

compacting graded stone aggregate to wet

mix macadam specification including

premixing the Material by tipper to site,

6 laying in uniform layers with paver in sub- 175 CuM ₹1,008.00 ₹176,400.00

base / base course on well prepared

surface and compacting with vibratory

roller to achieve the desired density

Supply and provide polished Agra Red

sandstone of approved colour, pattern and

thickness (25–30 mm for paving & heavy-

duty use), duly calibrated, cut to size,

machine-polished both faces to gloss finish,

including edge straightening, chamfering as

required, supply and application of

primer/adhesive or cement-sand bedding,

7 pointing with matching pigment-grout, 1748.00 SqM ₹2,800.00 ₹4,894,400.00

sealing with solvent-based impregnating

sealer, cleaning and protection, including

loading, transport to site, handling, and all

labour, plant and incidental works

complete as directed by the Engineer-in-

Site clearance - include complete clearing

of the designated site area prior to

commencement of construction or

landscaping activities. It comprises removal

of unwanted vegetation, grass, shrubs,

small trees, roots, stumps, debris, rubbish,

top organic soil up to specified depth, and

any other objectionable matter that may

interfere with further works. All materials

8 unsuitable for reuse shall be collected, 3510 SQM ₹100.00 ₹351,000.00

carted, and disposed of at approved

locations beyond the project site, in

accordance with environmental guidelines.

Usable material, if any, shall be stacked

neatly as directed. The surface shall be left

clean, levelled, and ready for setting out,

excavation, or subsequent construction

TOTAL AMOUNT ₹8,487,249.08

TOTAL AMOUNT ₹8,487,249.08

CHILDREN'S PLAYGROUND

Excavation for foundation upto 1.5 m

depth including sorting out and stacking of

9 useful materials and disposing off the 137 CuM ₹121.72 ₹16,675.64

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Construction of granular sub-base by

providing close graded material, mixing in a

mechanical mix plant at OMC, spreading in

uniform layers with motor grader on

prepared surface and compacting with

vibratory power roller to achieve the

desired density complete (Grade-I)

Providing and laying Quarry Dust (crusher

dust) layer of average 20–30 mm thickness

over prepared PCC base, including

spreading, levelling, lightly compacting by

hand tamper, removing oversized particles,

11 ensuring uniform thickness to act as a 390 SqM ₹ 150 ₹

separation and levelling layer beneath fine

sand, and completing the work with all

materials, labour, tools & tackles as

directed by Engineer-in-Charge

Supplying, laying and fixing non-woven

polypropylene geotextile fabric of

minimum 150–200 GSM beneath red

soil/murum pathway over prepared GSB

surface, including surface cleaning, proper

12 overlapping (minimum 300 mm at joints), 390 SqM ₹75.00 ₹29,250.00

anchoring with U-pins/staples, trimming,

protection during subsequent layer

placement and complete as per

specifications and engineer’s direction

Providing, spreading, watering, levelling

and compacting natural red clay suitable

for playground use, free from stones, roots

and organic matter, having Plasticity Index

(PI) between 12 to 20, laid to a compacted

13 thickness of 50 mm, including addition of 390 SqM ₹150.00 ₹58,500.00

up to 5% fine brick powder/red soil if

required to improve binding, finished to a

smooth, even and non-slippery playing

surface, complete as directed by Engineer-

Design, supply, fabrication, transportation

and installation of modular outdoor

children’s play equipment in organic /

polygonal geometric form comprising

interconnected angular timber frames

forming hexagonal and multi-faceted

climbing volumes with elevated platforms,

access bridges and play nodes, constructed

using pressure-treated

14 hardwood/engineered timber posts and 2 Each ₹475,000.00 ₹950,000.00

slats, including stainless steel slide, rope

and ladder climbing elements, concealed

galvanized MS base plates, anchors and

fasteners, finished with outdoor-grade non-

toxic protective wood coating, complete in

all respects as per approved drawings and

safety standards

Design, supply, fabrication, transportation

and installation of outdoor children’s nest

swing in A-frame configuration made of

pressure-treated hardwood timber posts

and beam (minimum 150×150 mm posts

and 200×100 mm top beam), including

heavy-duty circular rope basket swing seat

(Ø900–1000 mm) with reinforced steel

15 core, UV-stabilized polypropylene ropes, 2 Each ₹150,000.00 ₹300,000.00

stainless steel suspension chains, swivels

and anti-twist connectors, concealed

galvanized MS brackets, anchor plates and

fasteners, finished with outdoor-grade non-

toxic protective wood coating, complete in

all respects as per safety standards

TOTAL AMOUNT ₹1,484,610.64

TOTAL AMOUNT ₹1,484,610.64

SHADED SEATING & GAZEBO

Design, fabrication, supply and erection of

modern outdoor shaded seating pergola

comprising powder-coated MS vertical

columns and beams (minimum 100×100

mm columns and 150×75 mm beams),

supporting overhead hardwood timber

pergola slats (minimum 50×75 mm, spaced

75–100 mm c/c) providing semi-open

16 shading, including concealed base plates, 164 SqM ₹13,500.00 ₹2,214,000.00

anchor bolts, MS brackets, all necessary

welding, grinding, alignment, anti-corrosive

primer and final PU / epoxy paint finish to

steel, exterior-grade wood preservative and

polish to timber members, complete in all

respects as per approved drawings,

Providing, supplying and fixing exterior-

grade wooden decking flooring using

seasoned hardwood planks (SAL/ TEAK

SUBSTITUTE) of minimum 25–30 mm

thickness and 90–120 mm width, laid with

5–8 mm expansion gap on concealed

MS/treated-wood joist framework, fixed

17 with SS-304 screws / hidden fasteners, 164 SqM ₹8,000.00 ₹1,312,000.00

including edge finishing, sanding,

application of exterior wood preservative,

anti-termite treatment, and two coats of

UV-resistant exterior wood oil/polish,

complete in all respects as per approved

Providing, supplying and fixing outdoor

café / seating table made entirely of mild

steel comprising solid MS tabletop

fabricated from minimum 6 mm thick MS

plate with chamfered edges, supported on

heavy-duty MS pedestal base fabricated

from MS box sections and base plate

18 (minimum 10 mm thick), including all 7 Nos. ₹22,500.00 ₹157,500.00

cutting, welding, grinding, concealed

stiffeners, levelling arrangement,

application of one coat anti-corrosive zinc

primer and two coats of epoxy/PU paint

finish of approved colour, complete in all

respects, suitable for outdoor lakefront

Design, manufacture, supply and

installation of curved outdoor backless

seating bench comprising precast

RCC/GFRC supporting base and

hardwood/WPC seating slats of minimum

19 30–35 mm thickness, fixed with concealed 21 Rmt ₹35,000.00 ₹735,000.00

SS fasteners, including all hardware,

surface preparation, outdoor-grade

protective coating, complete in all respects

as per approved drawings and

specifications.

Design, fabrication, supply and erection of

free-form structural steel framework for

architectural pavilion comprising inclined

steel columns, cantilevered roof beams and

curved / folded steel members fabricated

from structural steel plates, RHS/SHS/IS

sections as per approved structural

drawings, including secondary steel

20 members (purlins/ribs) for supporting soffit 2 MT ₹160,000.00 ₹320,000.00

cladding, complete with shop fabrication,

full-penetration welding, site bolting,

temporary bracing, alignment, anchor bolt

connections, anti-corrosive zinc primer,

epoxy intermediate coat and PU finish coat,

complete in all respects as per approved

drawings and specifications

Providing, supplying and fixing seasoned

natural hardwood planks (Teak / Iroko /

Merbau / equivalent approved hardwood)

of minimum finished thickness 25–30 mm

and width 90–120 mm, kiln-dried to

moisture content ≤12%, free from cracks,

warping and sapwood, used as non-

structural façade cladding and roof soffit

lining, fixed over steel sub-frame using

21 concealed SS 304/316 screws or clips, 56 SqM ₹10,000.00 ₹560,000.00

maintaining uniform shadow gaps of 5–8

mm, including edge trimming, cutting,

sanding, surface preparation, and

application of minimum two coats of

exterior-grade UV-resistant oil / PU / wood

preservative, complete in all respects as

per approved drawings and directions of

Engineer-in-Charge

TOTAL AMOUNT ₹5,298,500.00

TOTAL AMOUNT ₹5,298,500.00

VIEW POINT & BOATING DECK

Providing, fabricating, supplying and

erecting structural steel work for cantilever

deck/gazebo including primary and

secondary beams, columns, bracings,

connection plates and anchor assemblies,

made of steel conforming to IS

22 (E350), complete with hot-dip galvanisation 2 MT ₹150,000.00 ₹300,000.00

(min. 80 microns), epoxy zinc primer and

PU paint, including all welding, bolting,

transportation, erection and incidental

works, complete as directed by Engineer-in-

Providing and fixing approved quality

pressure-treated hardwood decking planks

of minimum 30–35 mm thickness over MS

joists, including cutting, drilling, stainless

steel (SS 304) screw fixing, providing

23 uniform gaps for drainage, applying marine- 99 SqM ₹10,000.00 ₹990,000.00

grade wood preservative and exterior

protective oil/sealer, complete in all

respects as directed by Engineer-in-Charge

Providing, fabricating, supplying and fixing

Aluminium Composite Panel (ACP) cladding

of minimum 4 mm thickness on roof/top

canopy over MS framework, including

aluminium cleats, brackets, fixing

accessories, cutting, bending, grooving,

24 sealing joints with approved sealant, and 99 SqM ₹5,000.00 ₹495,000.00

providing necessary supports, complete

with all materials, labour, tools and tackles,

finished in approved shade and make,

complete as directed by Engineer-in-Charge

Empty boring through all sorts of strata for

providing 1.20 Mt. diameter R.C.C. bored

piles to required depth required depth

including providing necessary casing pipe

with all plants and equipments as required

Providing and laying controlled cement

concrete M-250 for R.C.C. bored piles of

26 1.20 Mt. diameter including ramming, 1131 CuM ₹4,711.10 ₹5,328,254.10

vibrating and finishing complete.

Providing and fixing in position Fe 500D

TMT for R.C.C. bored piles as per detailed

drawing, including cutting, bending hooking

tying and welding complete and including

cage and lowering it in position. (up to

Providing and casting in situ controlled

cement concrete M-200 for R.C.C. pile cap

28 including necessary formwork, vibrating, 29 CuM ₹4,803.33 ₹139,296.57

curing and finishing complete

Providing and placing in position High yield

strength deformed bars for pile cap

29 including cutting, bending hooking, and 5 MT ₹56,664.12 ₹283,320.60

tying complete as per detailed drawing

Providing, fabricating, supplying and

erecting curved/straight structural steel

girders as primary load-carrying members

for pedestrian bridge/boardwalk, made

from rolled steel sections (ISMB 300 / ISMB

350 or as approved) conforming to IS

(Grade E350), including cutting, bending to

30 required curvature, welding, bolting, 2 MT ₹145,000.00 ₹290,000.00

stiffeners, connection plates,

transportation, erection, alignment,

complete with hot-dip galvanisation

(minimum 80 microns) and epoxy primer

with PU finish, complete as directed by

Engineer-in-Charge

Providing, fabricating, supplying and fixing

secondary structural steel joists for

pedestrian bridge/boardwalk, made of

rolled steel sections / rectangular hollow

sections (RHS 100×50×4 mm or equivalent)

conforming to IS 2062 (Grade E350),

including cutting, welding, bolting to

31 primary girders, providing cleat plates, 2 MT ₹135,000.00 ₹270,000.00

stiffeners where required, transportation,

erection and alignment, complete with hot-

dip galvanisation (minimum 80 microns)

and epoxy primer with PU finish, complete

as directed by Engineer-in-Charge

Providing and fixing approved quality

pressure-treated hardwood decking planks

of minimum 30–35 mm thickness and

90–120 mm width over secondary steel

joists, including cutting, drilling, fixing with

stainless steel (SS 304) countersunk screws,

maintaining uniform gaps of 6–8 mm for

32 drainage and expansion, applying approved 420 SqM ₹10,000.00 ₹4,200,000.00

preservative treatment and marine-grade

exterior wood oil/sealer, complete with all

materials, labour, tools and incidental

charges, as directed by Engineer-in-Charge

Excavation for foundation upto 1.5 m

depth including sorting out and stacking of

useful materials and disposing off the

excavated stuff \ upto 50 Meter lead.(A)

Loose or soft soil

Providing and laying cement concrete 1:3:6

(1-Cement : 3- coarse sand : 6- hand

broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

CC work M-25 for RCC footing using

aggregate of size 10-20 mm, centring,

curing, finishing etc. complete (without

CC work M-25 for Beam using aggregate of

size 10-20 mm, centring, curing, finishing

etc. complete (without reinforcement)

CC work M-25 for Column using aggregate

of size 10-20 mm, centring, curing, finishing

etc. complete (without reinforcement)

Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

38 and placing in position complete upto floor 10000 Kg ₹76.52 ₹765,200.00

Brick work using common burnt clay

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement :

-fine sand) (A) Modular

Extra for brick work in superstructure

above plinth level upto floor two level (A)

Providing 10mm thick cement plaster in

single coat on brick/concrete walls for

interior plastering upto floor two level and

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior

plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

Providing 20 mm thick double coat mala

cement plaster on interior brick / concrete

work for plastering comprising of base coat

of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough

43 finishing and 8 mm thick top coat of 177 SqM ₹281.14 ₹49,761.78

cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including

scaffolding curing etc. complete.

Water Proofing Treatment on Terrace and

Wall sides with smooth finishing including

material-labour etc. complete

Plastic Imulsion Paint (Two coats) (Asian

Paint, ICI, Dulux, Nerolac, Berger etc. of

approved type) (with Prime Coat)

Apex Color work on Outer side of Wall

(Two coats) (with Base Coat)

Supply & Fixing of Glazed tiles (1st Quality)

of required size in Cement Roga and joints

47 to be filled with white cement after 12mm 290.00 SqM ₹493.00 ₹142,970.00

rough plaster in proportion of 1:3

Providing and laying anti-skid matt-finish

ceramic/vitrified floor tiles (R11 slip

resistance), 300×300 mm or approved size,

8–10 mm thick, on cement mortar bed

including cutting, joint filling with

waterproof grout, forming required slopes,

cleaning and curing, complete as directed

Providing & fixing FRP door.

Supply & Fixing of Polished on both sides of

Kota Stone in thickness of 20-25 mm to fix

50 as Urinal Curtain and as per instruction 5 SqM ₹907.00 ₹4,535.00

machine cut should be done on this Kota in

all three sides

TOTAL AMOUNT ₹19,646,961.74

TOTAL AMOUNT ₹19,646,961.74

Providing and fixing wash down water

closet (European type WCpan) with sit

51 cover including jet spray and stop cock 15.00 Nos. ₹ 1,784.00 ₹

Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as

lead valve less syphon, 15mm nomInal size

brass ball valve with polythene float, C.P

brass handle unions and couplings for

connections, with inlet, outlet and overflow

52 pipes, 40mm dia. porcelain enamelled flush 10.00 Each ₹ 2,346.92 ₹

bend including cutting holes in walls and

making good the same connecting the flush

bend with cistern and closet (overflow pipe

to be measured and paid for separately)(A)

Vitreous China (I) In white colour

White porselin wash basin 560/410mm

indian make c.i. bracket with fitting

53 cromium platted topes 25cm plastic waste 13.00 Nos. ₹ 1,434.00 ₹

pipe and 12mm pillar cock with comp.

Providing and fixing Urinal or approved

quality including conecting the Urinal with

waste pipe , tap etc. complete.(A)

54 White earthenware flat back or corner type 10.00 Each ₹ 1,064.22 ₹

size 430mm x260mm x 350mm.

Providing and fixing C.P. brass waste for

washbasin or sink. (A) 32mmdia.

Providing and fixing M.I. fisher union for

washbasin or sink. (A) 32mm dia.

Providing and fixing chromium plated,

57 bottle trap with necessary couplings of 13.00 Each ₹ 292.87 ₹

approved quality for wash basin.

Providing and fixing 100mm sand cast iron

58 grating for gully, floor or Nahni trap. 15.00 Each ₹ 36.61 ₹

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

Providing and fixing toilet paper holder.(A)

60 C.P. Brass 15.00 Each ₹ 423.75 ₹

Providing and fixing screw down bib taps of

following size.(B) Brass chromium plated

screws down Bib Tap. (i)15mm dia.

Providing and fixing screw down bib taps of

following size.(B) Brass chromium plated

screws down Bib Tap.(ii) 20mm dia.

Providing and fixing pillar tap, capstan

head, screw downhigh pressure with

screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts. (ii) 20mm

Providing and fixing brass screw down stop

tap.(A) 15mm dia.

Providing and fixing brass screw down stop

tap.(B) 20mm dia.

Providing and fixing Gun metal check or

non-return fullway wheel valve.(A) 15mm

Providing and fixing Gun metal check or

non-return fullway wheel valve.(B) 20mm

Providing and fixing Gun metal check or

non-return fullway wheel valve.(C) 25mm

Providing and fixing Gun metal check or

non-return fullway wheel valve.(D) 32mm

Providing and fixing Rubber plug for sink or

71 wash basin. 13.00 Each ₹ 16.98 ₹

Providing and fixing ball cock of approved.

quality as directed.(A) Copper Metal (i)

Providing laying and jointing in true line

and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp

73 at every two metre C/C or shall be 100.00 Rmt ₹ 71.93 ₹

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all

Providing laying and jointing in true line

and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp

at every two metre C/C or shall be

74 concealed as directed including necessary 100.00 Rmt ₹ 90.93 ₹

fittings etc. including testing of pipe and

joints and fixing

the same with adhesive solvent, including

Providing laying and jointing in true line

and level 32mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp

at every two metre C/C or shall be

75 concealed as directed including necessary 50.00 Rmt ₹ 117.97 ₹

fittings etc. including testing of pipe and

joints and fixing

the same with adhesive solvent, including

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with

jali of the following nominal diameter of

76 self cleansing design with C.I scread down 15.00 Each ₹ 580.47 ₹

or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 75 mm diameter with jali

of the following nominal diameter of self

77 cleansing design with C.I scread down or 4.00 Each ₹ 568.89 ₹

hinged grating including the cost of cutting

and making good the walls.

Providing & Fixing Brass cock screw down

bolt type 15mm dia. fitting with fixing.

flushing valve brass cromium platted push

cock of handle type with flushing supply

79 and fixing 10.00 Nos. ₹ 811.00 ₹

Brass wheel valve 50mm dia. fitting with

Brass wheel valve 40mm dia. fitting with

Brass wheel valve 25mm dia. fitting with

Chini gully trape approved quality supply

with fitting and C.I. jali requaire size with

83 fitting 7.00 Nos. ₹ 480.00 ₹

Nahni trape 7.6cm of PVC fitting and fixing

Providing erecting and fixing double coated

ISI water tank of required capacity each

85 with all necessary fittings and connection 7000.00 Litre ₹ 3.91 ₹

etc. complete on terrace

RCC precast frame with supply, fitting,

fixing with complete as per specification

Providing and fixing in position cowel went

to pipes.(C) 100mm dia

R.C.C. Spun pipe IS. N.P.-3 class pipe,

should of the standard design and also

have corresponding standard diameter as

per length including collar joint in it, all

taxes, insurance, transportation, loading

along with unloading and reaching the

store or site and carrying out necessary

inspections along with providing supply

88 work and required hemp, wata (from CM. 456 Rmt ₹976.00 ₹445,056.00

1:1) and also line level. And complete

including lying, jointing, curing with

required hemp in grades. for pipe of NP -

class of 300 m.m. dia.for Only supply And

Drainage house connection should

construction either ( square / round )

withg brick masonry type ( 0.50m* 0.50m)

in which the bottom should be of CC 1:3:6

with brick masonry 1:4 cum plaster 1:3 cm

coping CC 1:1:2 and also benching around

89 it with 1:2:4 should be done with 2 NOS ₹2,742.00 ₹5,484.00

finishing,curing and fixing frame cover.

(excluding excavation or suplly of frame

cover) (More than 0.45 meter and up to

0.60 meter depth)

Manhole 1.20m/0.90m size 1.20m deep

with exavation cement concrete 1:2:4

brick meassonary 1:6 0.30mm thick,

90 foundation cement plaster 1:3, benching 5 NOS ₹7,551.00 ₹37,755.00

50mm thick, IPS 1:2:4, top 15cm thick CC

copping 1:2:4 with quaring finishing

(without cover plate)

iron work as per instruction for valve

Supply and Fixing of RCC Precast Circular

Manhole Frame and Cover 20 ton capacity.

TOTAL AMOUNT ₹512,620.00

TOTAL AMOUNT ₹512,620.00

Pipes Work: Supply, laying &

commissioning in position PVC pipe

conforming to IS:4985:2000 and suitable

for the respective working pressures

without all fittings and accessories e.g.

couplings, tees, bends, reducers, screwed

adapters, flanged tail pieces etc., complete,

as per the instructions of

Architect/Landscape Architect/Engineer In

93 PVC pipe 75mm-10 kg/cm²- MAINLINE 356 Rm ₹332.00 ₹118,192.00

95 PVC pipe 40mm-6 kg/cm² 18 Rm ₹92.50 ₹1,665.00

Supply,Fixing & commissioning of MS

98 Bracket fabricated from L-Angle with 50 Nos ₹900.00 ₹45,000.00

Anchor Bolts as wall/floor clamping

Supply, Fixing & Commissioning of flexible

16mm inline tubing PC Drippers with

pressure compensating, self flushing

mechanism, resistance to UV damage,

algae growth brown in colour, Longer

lateral run lengh with flow rate 2lph /

99 lph, pressure rating 0.58 to 4 bar , Dripper 500 Rm ₹69.00 ₹34,500.00

Spacing at 30 cm / 45 cm Spacing wall

thickness 1.1mm to 1.2mm etc., complete,

as per the instructions of

Architect/Landscape Architect/Engineer In

Charge. WITH ALL FITTINGS

Supply,Fixing & commissioning of 40mm

dia self-closing flushing valves that are

installed at the end of the irrigation line for

effecting flushing of the line at the

beginning of every irrigation cycle, thus

100 avoiding the clogging of the emitters 9 Nos ₹200.00 ₹1,800.00

/sprinklers through removal of particles,

sediments and other impurities from the

water. etc., complete, as per the

instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of 9 - Gauge

Galvanized Steel Rod Comes Sharp tips

provide easy insertion into all soil types,

Staple Distribution Tubing , XF Drip Line or

101 XBS Tubing to Finished Grade. Notched 400 Nos ₹20.00 ₹8,000.00

Sides. Corrosion -Resistant of TIE DOWN

STAKE etc., complete, as per the

instructions of Architect/Landscape

Architect/Engineer In Charge.

TOTAL AMOUNT ₹302,007.50

TOTAL AMOUNT ₹302,007.50

Providing & erecting PVC Corrugated

Flexible Conduit with required nos. of

coupling, PVC bushes, Check- nuts etc.

complete of following sizes.(2) 25 mm

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

103 with necessary clamps or in existing trench 300 Mtr. ₹269.00 ₹80,700.00

/ pipe at road crossing or floor of following

size of cables. (A) 4 core 2.5 Sq. mm

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

105 with necessary clamps or in existing trench 100 Mtr. ₹670.00 ₹67,000.00

/ pipe at road crossing or floor of following

size of cables (A) 4 core 10 Sq. mm

Solderless crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/2.5 to

SWITCHGEAR & DISTRIBUTION BOARD

providing and erecting Miniature circuit

breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

EXTERNAL LIGHTING

Providing, supplying, transporting, erecting,

testing and commissioning 5.0 metre high

decorative LED pole light complete in all

respects, made from GI tubular pole (114

mm OD bottom section – 2.0 m & 76 mm

OD top section – 3.0 m) with PP powder-

coated finish, fitted with aluminium post-

top LED luminaire of 500 mm diameter,

equipped with 100 Watt LED module using

high-efficiency LED chips and electronic

108 driver, including base plate 200×200×8 mm 30 Nos. ₹12,500.00 ₹375,000.00

thick, 600 mm long 12 mm dia J-type

foundation bolts with nuts & washers,

internal wiring with MCB and connector

strip, complete installation, alignment,

electrical connections, testing and

commissioning at site, including all

materials, labour, tools, tackles and

incidentals, as directed by Engineer-in-

Supplying and erecting approved make

Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and

shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box

consist of terminal plate of min 6mm

Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for

109 cable termination to be erected With 15 Ea. ₹5,501.00 ₹82,515.00

Suitable foundation (Included) as per

details given by manufacturer considering

site requirement. (B) 4 Mtr. Long 70 mm

Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 450mm long

with necessary G.I. J Bolts .Approx weight

Providing and erecting Street Light pole

bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for

mm /80mm / required size of pole top

having sufficient fasteners for fixing the

brackets and having spread of 1.5.mtr.

110 length with 110 deg.with vertical plane & 15 Ea ₹620.00 ₹9,300.00

suitable welded stays, reducer and with

check nuts complete painted with one coat

of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with

following nos of arms [A] Single Arm

Bracket 1.5 Mtr

Supplying & erecting approved make SMC

press moulded composite FRP . loop-in,

loopout approx. 2mm thick box complete

with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob

111 & hinged doors as per requirement having 15 Ea ₹890.00 ₹13,350.00

locking arrangements with mounting clamp

with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth

bolt of following size of box.(a) 300mm x

200mm x 100mm [deep]

Providing and erecting iron clad cable route

marker duly marked with ELE.CABLE of size

23 cm.X 12 cm. Flushed with ground in

cement foundation as directed by Engineer

Supplying and erecting B class Galvanized

iron pipe having smooth finished bore of

the pipe on both ends erected nuts and

113 bolts along the pole / wall shaping the pipe 68 Mtr. ₹179.00 ₹12,172.00

as per site requirement. Pipe dia as

following.(a) 25 mm dia

Providing 1:2:4 cement concrete

foundation & 70 % PCC from bottom

including excavation for the pole of size

x 45 x 100 cm. Deep in below ground level

114 with plinth of 45 cm x 45 cm (or 45 cm dia 15 Ea. ₹801.00 ₹12,015.00

x 45 cm) high upper ground level with

necessary curing and finishing in approved

manner.( for 4 & 6 mtr pole)

Supplying and erecting LED street light /

Flood light fittings with High power White

LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K, Uniformity

115 ratio >0.45, Luminaire efficacy> 100 15 Ea ₹4,948.00 ₹74,220.00

lumens/watt . LED driver efficiency >

%.CREE /OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/ BridgeLux (U.S.A.) make

LED used for luminaire. ( fittings required

LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.) (A) Street

Light (IP-65), Surge protection - 4KV

integral and 10 kv non integral ,Light must

have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line

Supplying & erecting IP 55 grade following

size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate

erection to work uniform until erected with

cement concrete foundation and 45 cm

high bricks work finishing with plaster etc.

hinged double door internally supported on

both side,with internal and outside looking

arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two

116 Nos. one is welded and other with nut and 15 Ea ₹1,866.00 ₹27,990.00

bolt for erecting Bakelite sheet. Painting

the Section Pillar inside and out side with

three tank powder coated paint. section

pillar roof should be without joint with

water leakage proof & tested as per IP

test & followed by IS 2147 of 1962 (C) 60 X

30 X 45 cm section pillar fabricated from

16 Gauge MS Sheet with angle iron legs

cm long made from 35 X 35 X 5 mm thick

Supplying & erecting approved make Digital

time switch having lithium cell 6 years

operative and operate battery backup

channel day clock with 14 memory

programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum

117 switching setup time 1 minimum & LCD 4 Ea ₹ 3,137 ₹

display. Also comprised permanent ON/OFF

switching. Programming switches & housed

in fire proof thermoplastic enclosure &

transparent cover erected as required with

necessary connection erected as directed.

(E) Under Water Light,12V DC including

Driver,IP-67 with die-cast/deep drawn

118 housing with impact resistance clear 125 Each ₹877.00 ₹109,625.00

toughened glass. (ii) 12 watts CAT II

CABLES AND WIRES

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall

119 with necessary clamps or in existing trench 1098 Mtr ₹189.00 ₹207,522.00

/ pipe of following size of cables (B) 4 core

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench

/ pipe of following size of cables (F) 3 1/2

core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type

brass double compression type cable

gland with rubber ring for PVC insulated

armoured cable complete with out going

tails, insulating tape etc for following size of

cables. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type

brass double compression type cable

gland with rubber ring for PVC insulated

armoured cable complete with out going

tails, insulating tape etc for following size of

cables.(C) 3 & 1/2 core 70 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

123 pressure tool & connected to switchgear 120 Ea. ₹25.00 ₹3,000.00

terminals with brass/cadmium plated nut

bolts in an approved manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

124 pressure tool & connected to switchgear 120 Ea. ₹45.00 ₹5,400.00

terminals with brass/cadmium plated nut

bolts in an approved manner. (G)

Making trench in soft soil of suitable width

of 90 cm deep for laying cable or locating

125 the fault all over the run and back filling the 1098 Mtr. ₹46.00 ₹50,508.00

same and making the surface as normal

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to

127 be erected as directed of following size. 125 mtr ₹135.00 ₹16,875.00

(E) 3 core 2.5 Sq. mm

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of

mm having 200- 250 Micron galvanising,

connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

128 applications with chamber and heavy duty 2 Ea. ₹10,489.00 ₹20,978.00

cover.(approved make OEM has to submit

test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 • / meter

testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be

capable to retainmoisture for long time

Necessary test report must be

submitted.(c) For Electrical Installation

covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive

Providing and erecting Pipe type earthing

with 40 mm dia 2.5 mtr long 'B' grade G.I.

pipe with necessary coupling buch buried

129 in specially prepared earth pit & G.I. earth 25 Ea. ₹815.00 ₹20,375.00

wire of 8 SWG erected & connected as

directed (For panel)

For using salt and charcoal / coke as

required for pipe type earthing.

Providing one bag of 25 Kg. Additional Back

131 Filling Compound (BFC) suitable for safe 25 Ea. ₹700.00 ₹17,500.00

earthing device.

Providing and erecting required size Copper

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc.

using copper clamp.

Supply, installing, testing and

commissioning 24- Chanel Video/Audio

Recording Network Video Recorder, Total

480/400 fps (NTSC/PAL), PTZ Control, Time

synchronization between NVR and time

server or other NVR as per instruction by

Supply, installing, testing and

commissioning of 1.3 Mega pixel Dome

Camera 1/3" CMOS sensor, 20m IR

distance, IP 66, PoE, IPv4/IPv6, ONVIF ver

2.0 with neccesary power supply

arrangment suitable for indoor

ceiling/surface mounted type as per

instruction by EIC/Consultant.

Supply, installing, testing and

commissioning of 1.3 Mega pixel bullet

Camera 1/3" CMOS sensor, 20m IR

distance, IP 66, PoE, IPv4/IPv6, ONVIF ver

135 2.0 with neccesary power supply 42 Nos. ₹6,000.00 ₹252,000.00

arrangment suitable for indoor ceiling/

surface/ wall/ column mounted type as per

instruction by EIC/Consultant.

Supply, installing, testing and

136 commissioning of 8 chanel POE switch as 6 Nos. ₹8,000.00 ₹48,000.00

per instruction by EIC/Consultant

Supply, installing, testing and

commissioning of central management

software for Viewing, multi-NVR

management, suppoerting all cameras at

137 one single screen and maximum devices 1 Nos. ₹15,000.00 ₹15,000.00

management, auto search configuration

and status monitoring as per instruction by

EIC/Consultant.

Supply, installing, testing and

commissioning of 8 TB video surveillance

hard disk as per instruction by

EIC/Consultant.

Supply, installing, testing and

commissioning of 24U rack as per

Supply and connection of 40" LED Monitor

140 as per instruction by EIC/Consultant 5 Nos. ₹30,000.00 ₹150,000.00

Supply, installing, testing and

commissioning of CAT-6 cable for

computer socket outlets from data switch

to computer point laid through

141 raceways/conduits/floor trunks etc. With 1088 Mtr. ₹42.00 ₹45,696.00

required termination arrangment to

complete the job.(Rates of

raceways/conduits/floor trunks shall be

TOTAL AMOUNT ₹2,330,074.00

TOTAL AMOUNT ₹2,330,074.00