Supply of GLF spares at Surat Airport, Surat.

Amount

Supply of 200W/6.6A HIRL bi - pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required.

supply of Bi Pin Lamp Holder For AMA make elevated type Runway/Papi/Taxi Light Fitting ( male type) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 105W, 6.6Amp Halogen lamp suitable for existing OCEM make Inset type runway Fitting as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 200w,20A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required..

Supply of 45w,6.6A/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required..

Supply of 360 deg. Bi-Directional Outer clear lens (doom, suitable for Ama make elevated type runway edge light fittings) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 360 deg. Bi-Directional inner clear lens (doom, suitable for Ama make elevated edge runway Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of Green Spreader Lens (suitable for Ama make elevated type Threshold fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of Red Spreader Lens (suitable for Ama make elevated type End light fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 180 deg. Clear inner lens,Right ( suitable for Ama make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 180 deg. Clear inner lens,Left ( suitable for Ama make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 180 deg. Red inner lens Right ( suitable for Ama make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 180 deg. Red inner lens,Left ( suitable for Ama make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 180 deg. Yellow inner lens,Right ( suitable for Ama make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 180 deg. Yellow inner lens,Left ( suitable for Ama make elevated type runway edge Fitting) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of rubber / neoprene Gasket suitable for base Plate of existing AMA make elevated type runway edge/Approach/End/Threshold fitting as per AAI specification complete as required.

Supply of rubber / neoprene Gasket suitable for outer lens of existing AMA make elevated type runway edge fitting , as per AAI specification complete as required.

Supply of rubber / neoprene Gasket suitable for Inner lens of existing AMA make elevated type runway edge fitting , as per AAI specification complete as required.

Supply of rubber / neoprene Gasket suitable for lens of existing AMA make elevated type Approach/Threshold/End fitting , as per AAI specification complete as required.

Supply of outer side O Ring suitable for existing OCEM make Inset runway edge Fitting/Approch (Model No:- SLAP-C-ST-300-O) /Threshold (Model No:- SLTH-G-RI-200-O),( between fixture and base base ) as per AAI specification complete as required.

Supply of inner side O Ring for existing OCEM make runway edge Fitting/Approch (Model No:- SLAP-C-ST-300-O) /Threshold (Model No:- SLTH-G-RI-200-O) ,(O-Ring around the dome ) as per AAI specification complete as required.

Supply of Air field LED signage Converter with dual input and inbuilt change over, suitable for existing signages installed at site etc as per AAI specification complete as required. Input 2.8 A - 6.6 A series circuit Output : 35 V DC , 72 watt

Supply of lower Breakable Coupling suitable for existing AMA make elevated type runway edge Fitting as per AAI specification etc. complete as required.

Supply of lens cover for LED light fitting for existing AMA make for landing-H as per AAI specification etc. complete as required.

Supply of Porceling connector suitable for existing AMA make elevated type runway edge Fitting, inset fitting, and approach fitting as per AAI specification etc. complete as required.

Supply of Aluminium Reflactor suitable for existing AMA make elevated type Threshold/Approach /End light fittingas per AAI specification complete as required.

Supply of Clear /yellow /Green/Red filter suitable for existing OCEM make inset type Runway edge/Approch (Model No:- SLAP-C-ST-300-O) /Threshold (Model No:- SLTH-G-RI-200-O) fittings as per AAI specification complete as required.

Supply of Base Plate with 6 sets of M-10 SS nut bolts suitable for existing AMA make elevated type Edge light/Approach/End/Threshold fittings as per AAI specification complete as required.

Supply of Bi-Directional Elevated High Intensity Halogen Type AMA AUN Runway Edge Light Fitting complete with prefocus lamp holder, 200 watt 6.6 A halogen lamp ,clear outer prismatic dome, clear inner prismatic lens, lens holding mechanisam, ball joint for easy leveling, breakable coupling, central column mounting assembly, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, spring & plain washers & other accessories etc. and confirming to particular specification etc. complete as required to meet latest ICAO requirement but excluding base plate.

Supply of L-Bracket suitable for existing AMA make elevated type Threshold/Approach/End Light fittings as per AAI specification complete as required.

Supply of Following Spares for AMA Make Mk-III PAPI Unit s per AAI specification etc. complete as required.

Upper Breakable Coupling (including leg plate and point)

Red Filter for PAPI

Base Plate for PAPI

Upper Leg Pipe for PAPI(Left Hand Threded)

Lower Leg Pipe for PAPI(Left Hand Threded)

Locking Nut (Left Hand Threded)

Locking Nut (Right Hand Threded)

Threaded Adjustment Sleeve for PAPI

Checking Stick Base Plate for PAPI

Aluminium Reflactor for PAPI

Lock Nuts for PAPI

Terminal Block(Porcelain Connector) for PAPI

AMA Private Limited

SHRI K.D.INDUSTRIES

Manish Electricals