Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹11.9 L+₹59,234.70 (5.25%)Rejected-AOC SHOP NO 1 KARGI CHOWK HARIDWAR BY PASS DEHRADUN UTTARAKHAND | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
PERIODICAL SERVICES INCLUDING PLASTERING OF WALL/ CEILING IN TECHNICAL AND RESIDENTIAL AREA OF DEAL UNDER GE (I) RND DEHRADUN
2023_MES_598294_1
GE(I)RND/9254/E8/23-24
Open Tender
Civil Works
Item Rate
180 days
Dehradun
Class E Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I RND DEHRADUN
₹30,000
Yes
7 Jul 2023
25 May 2023
24 Jun 2023
25 May 2023
22 Jun 2023
3 Jun 2023
25 May 2023 - 3 Jun 2023
Amount
M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and directed.
All as per item No 01 above but on Ceiling Surface,Complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.
All as per item No 03 above but on Ceiling Surface,Complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by using putty & applying Birla/JK white wall putty approx 1 mm thick in two layers as per manufacturer's instruction on existing prepared surface and Priming plastered and other surfaces with alkali resistant priming paint make the surface smooth by rubbing with sand papers etc and applying two coats of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by using putty and applying one coat of smart damp proof and applying two coats of distemper oil emulsion over a coat alkali resitant primer on old prepared surfaces of walls complete all as specified and directed.
M&L for preparing old decorated surfaces of walls plastered or un plastered by brooming down with steel or wire brush and scraping down smoke moulds moss and efflorescent salt and treading oil and greasy spots , washing rubbing down and stopping of distempered and painted surfaces & removing all vegtation and making good holes ,craks complete by using putty and applying one coat of aclyric plastic emulsion paint on old prepared surfaces of walls complete all as specified and directed.
All as per item No 07 above but on Ceiling Surface,Complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by electric angle grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by using putty & applying of Birla/JK white wall putty approx 1 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior paint silicon based on old decorated surfaces of walls over a coat of primer complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by electric angle grinder and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by using putty and stoping of distempered and painted surface of wall and applying one coats of cement based paint complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by electric angle grinder and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by using putty and applying Two coats of cement base paint on old prepared surfaces of walls complete all as specified and directed.
M&L for preparing of old painted wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of wooden complete all as specified and directed.
M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.
M&L for preparing of old polished wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by using putty and make the surface smooth by rubbing with sand papers etc and applying one or more coat of french polish on old prepared surfaces of wooden complete all as specified and directed.
M & L for taking down old cement plaster/Grit wash on stone wall or brick surfaces of walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed. Note: (Debris will be removed out side premises at contractor is own arrangement )
M&L for rendering 15 mm thick on other then fair faces of concrete/ brick surface in cement mortar 1:6 finished fair and even as in wall complete all as specified and directed.
M&L for prepration of newly plastered surfaces of walls applying of Birla/JK white wall putty approx 1 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer after complete all as specified and directed.
M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- (i) WPC shall be measured and paid for seprately as "supply only" under respective item of sch A/ BOQ.
M&L for prepration of newly plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.
M&L for prepration of newly plastered surfaces of wall and applying Birla/JK white wall putty approx 1 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying one coat of damp proof and two coats of exterior weather proof paint over a coat of primer complete all as specified and directed.
Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.
M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Chajjas of any height with and including formwork to chullah hoods, chajjas, troughs & similar items and with and including demolition of RCC in Roofs, floors, (other than ground floors), beams staircases, landing, chajjas, & similar suspended work and removal of demolished materials to a distance exc 500 metre but not exc 1000 metre complete all as specified and directed.
M&L PCC Type B1(1:2:4) using (20 mm graded crused stone aggregates) as in coping etc including weathering , slightly rounded or chamfered angles and throating with and including necessary formwork with and including demolition of plain cement concrete (unreinforced) of any description in any position and removal of demolished materials to a distance exc 500 m but not exc 1000m complete all as specified and directed.
M&L for rendering ceiling 10 mm thick on fair faces of concrete in cement mortar 1:4 using SBR Chemical as per manufacturers Instruction finished fair and even as in Chajja, facia , roof projection complete all as specified and directed. (Make- Fosrock or equivalent)
M&L for prepration of newly plastered surfaces of ceiling and applying two coat of cement base paint complete all as specified and directed.
M&L Mild steel TMT bars 8mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed
All as per Sl item No-26 above but 5mm dia and over and including 10mm dia as in stirrups, spacers and binders. complete all as specified and directed.
M&L for Cleaning exposed mineral substrate like stone/ Grit Wash/ Brick/ Concrete/ Cement paint and removing dirt, dust , bird dropping grease, oil, algae, fungus, vegetable growth etc, including providing, applaying cleaning chemical agents where ever required, with fine silica, mixing it with clean water, with out causing any scratching /damag to the surface. And then after providing and applying breathable, non-film forming, non-reactive, antifungal and water repellant silane/siloxane silicaone chemical as approved by Archaeological Survey of India/Engineer-in-Charge, of approved brand and manufacture, diluted with solvent Mineral Tupentine Oil in the ratio of 1:12 (One part of approved chemical :12 part of Mineral Turpenting oil), on the existing masonry surface with two coat at wet on wet woriking to give uniform application of ready to use chemical, complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement 4 coarse sand) follow the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 Part cement 1/2 coarse sand and 2 Part stone chipping 10mm nominal size) in pannels wih grooves all aroud as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified and directed.
M&L for Forming groves of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden batters nailed to the under layer including removal of wooden batters repair to the edges of panels and finishing the groove complete all as specified and directed.
M&L for removing the plants/ vegetation upto Six story height including penefreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) complete all as specified and directed.
M&L for writing letters or figures (Black, roman, Indian) not exc. 30cm high using synthetic enamel paint of requried tint complete all as specified and directed.
M&L for stops, commas, short lines, dashes, hyphens, brackets etc. using synthetic enamel paint of required tint complete all as specified and directed.
Note: (i) The work will be carried out upto 6th storey bldgs hence necessary safety precautions complete scaffolding and other arrangement will be managed by tenderer/ bidder accordigly. (ii) Tenderer kind attention is also invited to Srl clause 1.16 of Sec-I on srl page No 6 General rules for sefety in construction as specfied in SSR Part-I(2009) for safety measures / precautions. (iii) Steel scaffolfing is to be used in the work.
OM TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .