PROVN OF ELEVATED SENTRY POST WITH GUARD ROOM AND ATT TOILET AT REAR SIDE ADJACENT TO AIR PORT OF 311 FD HOSP AT AHMEDABAD CANTT

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : 01/LBW/STN HQ/A'BAD/2024-25/Q3 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

Surface Excavation N.exc (not Exceeding) 30 Cm Deep And Averaging 15cm Deep And Getting Out In Soft/loose Soil complete all as specified and directed

Excavating in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil complete all as specified and directed

Excavating in trenches, n.exc 1.5m wide & exc 1.5m in depth but n.exc 3.0 m; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil complete all as specified and directed

Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (area Of The Sub Structure In Contact With Backfill To Be Measured) complete all as specified and directed

Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface complete all as specified and directed

Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall complete all as specified and directed

Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area complete all as specified and directed

M & L Pcc (1:4:8) Type D2(40 Mm Graded Aggregate) For Footing complete all as specified and directed

Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft To Loose Soil complete all as specified and directed

Removing Excavated Soil Not Exc. 50m And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate for Foundation ,plinth beam,including Rafts As Mass Concrete complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Foundation,plinth beam complete all as specified and directed

S&F high strength deformed TMT steel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed

All as above item 1.13 But 5 To 10mm Dia In Stirrups, Spacers & Binders complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Column complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Column complete all as specified and directed

M &L Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, Mean Radius, Built In Cm (1:6) complete all as specified and directed

M&L Brickwork With old size subclass ‘B’ bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls, Built In Cm (1:4) complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Lintel Band and slab beam complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Lintel Band and slab beam complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Chajja complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Chajja complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Slab complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Slab complete all as specified and directed

M & L 10 Mm Thick 1:6 Cm Internal Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed

M & L 5 Mm Thick 1:3 Cm Plaster On Ceiling. Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed

M & L 15 Mm Thick (10 Mm + 5 Mm 1:6 Cm) External Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed

Supply Only water proofing compound complete all as specified and directed

M&L Pcc 1:3:6 Type C-0 for Filling In Door Frame complete all as specified and directed

S&F 105X60 MM Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick 2nd class hardwood Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (a); Supplied And Fitted To Chowkats complete all as specified and directed

S&F Wire Netting Of Stainless Steel Wire 1.4mm Dia Fixed With Tinned Tacks Of Stainless Steel Wire Staples complete all as specified and directed

S & F Solid Pvc Door Frame Of Size 50mm X 47mm Made Out Of 5mm Wood Grain Printed Pvc Sheet Reinforced With M.s. Square Tube, Suppling & Fixing In Opening complete all as specified and directed

S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (style) Consisting Of Frame Made Out Of M.s. Tubes For Top & Bottom Rails. M.s. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘c’ Channel Having A Pvc Sheet Strip Of 20mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.s. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site complete all as specified and directed

S&F Al Barrel Tower Bolt Of 200 Mm Long complete all as specified and directed

S&F Al Handles Cast Anodised 125 Mm Long complete all as specified and directed

S&F Al Drop Bolt Of 150 Mm Long complete all as specified and directed

S&F Floor Door Stoper Al Alloy 150mm Long complete all as specified and directed

S&F Ms Butt Hinges Of 100 Mm Long complete all as specified and directed

S&F Ms Work Such As Bands, Straps, Hold Fast, Clamps, Hooks & Similar Fe-410-o Or Fe-310-o complete all as specified and directed

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

S & F M&L for Powder coated aluminium ventilator having frame of Section 57x52 ,Series -B 20535 and shutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). complete all as specifiedcomplete all as specified and as directed.

S&F rolled mild steel section as in Roof trusses,trussed,purlins,crane gantries,railsand fastenings and heavy bracket framing including distance pieces,cleats,etc. complete all as specified and directed

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed.(Note : Corrugation colour and shape of sheet shall be approved by GE)

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws including neoprene and EPDM washers complete all as specified and directed.

S&F mild steel for Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.gde-e-165 complete all as specified and directed

M&L preparation of new steel surface and applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Steel Primer all as directed.

M&L preparation of newly plastered surface and applying Two Coats Of Oil Bound Distemper Over One Coat Of Wall Primer Over 3 Mm Thick Wall Care Putty All As Specified With Approved Colour Pattern On Walls, Beams, Soffits, Columns, Etc. complete all as specified and directed

M&L Preparation of newly plastered surface and applying Three Coats Of White Wash All As Specified On Ceilings, Etc. complete all as specified and directed

M&L preparation of newly platered surface and applyingTwo Coats Of Cement Based Paint Over One Coat Of Wall Primer complete all as specified and directed

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step or shelvesetc incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed

M & L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

M&L Cement Concrete 25mm Thick 1:2:4 Type B0 (40mm Graded Aggregate) As In Sub Base complete all as specified and directed

M&L Cement Concrete 75mm Thick 1:4:8 Type D2 (40mm Graded Aggregate) As In Sub Base complete all as specified and directed

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18Sqm but n. exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified

All as above item 1.56 but as in skirting including 10mm thick backing coat of tiles in CM(1:4) complete all as specified.

M&L Glazed Ceramic Tiles In Vertical Surface 350x 250x 7 Mm/ 450x 350x 7mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match over 10 Mm Thick 1:3 Cm Plaster On Walls complete all as specified and directed

M & L 75mm Thick Plinth Protection Pcc (1:3:6) Using 20mm Graded Aggregate.

M&L Hardcore Of Guage Exc 63mm But N Exc. 100 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rolled/rammed To A True Surface complete all as specified and directed

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete all as specified and directed

S & F Vitreous China Squatting Pan, ‘orissa’ Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (excluding Flushing Cistern And Flush Pipe) complete all as specified and directed

S&F 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed.

S&F Vitreous china urinals, Urinal Bowl Type 465x355x265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with & including 60 mm long brass screw, fixing flush pipe, brass CP grating and union for discharge pipe, PVC telescopic waste pipe of suitable length etc complete all as specified and directed

S &F PVC floor Traps with grating 75mm Bore complete all as specified and directed

S&F Vitreous china wash hand basin white flat back 550 x 400 mm with pedestal of standard size including chromium plated brass waste coupling, waste pipe, vulcanite plug with ring, pillar taps, PVC connection of suitable length, brackets and cutting for & pinning in ends of brackets etc complete all as specified and directed

S&F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 15 mm bore complete all as specified and directed

S&F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 20 mm bore complete all as specified and directed

S&F Stop valve/ angle valve , cast copper alloy, chromium plated (concealed or non concelad type) fancy type handle, screwed down, high pressure with push type handle screwed for 15 mm bore iron pipe and fixed.

S&F brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and directed

S& F 15mm Bib Taps, Cast Copper Alloy With Crutch Or Butterfly Handle Chromium Plated complete all as specified and directed

S&F 5.5 mm thick looking mirror size 600 x 450 mm with PVC frame of approved quality & make GE fixed in position with rawl plug and screws of appropriate size.

S&F Pvc Swr Pipe 110 Mm Soil Pipe complete all as specified and directed

S&F Pvc Swr Pipe 75 Mm Waste Pipe complete all as specified and directed

S&F Pvc Bend Suitable For 110 Mm complete all as specified and directed

S&F Pvc Bend Suitable For 75 Mm complete all as specified and directed

S&F Rotational moulded polyethylene (HDPE) water storage tanks, double layer (cylindrical vertical with closed top) capacity 1000 litres hoisted and placed in posiition on PCC platform complete all as specified & as shown on drawings

S&F Ball Valve 25 Mm Dia For Water Tank complete all as specified and directed

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types -Green Marble

Surface dressing n exc 15 cm deep in soft/loose soil. complete all as spd and directed.

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed

M&L precast cement concrete kerb stones macine pressed factory made PCC 1:3:6 type Co set in CM 1:6 including all necessary earthworks complete. finished fair, jointed including complete all as specified and directed

M & L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M& L providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick (M-35 grade) with grey cement and pigment of approved design complete all as specified and directed by Engr-in-Charge

Cutting existing steel tubing for alterations or additions of pipe size 40/50 mm bore and screwing complete all as specified and directed

Supply and lay pipe galvanized, :Medium Class", including fittings 20 mm (3/4") dia complete all as specified and directed

Supply and fix valve, globe conforming to IS 9338, 50mm (2") dia pipe complete all as specified and directed

S&F 20 mm dia , Stop valves, Cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated.

M&L for construction of brick masonarry 600mmx600mmx600mm (internal size ) new valve pit chamber of following size 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick built in CM 1:6 rendering in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame embbeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron appplying two coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified and directed.

M&L for cement concrete 1:4:8 type C2 using 40 mm graded agg. as in foundation of manhole all as specified and directed.

M&L for PCC 1:3:6 type B 1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete all as specified and shown in drawing

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels, benching for manholes all as specified.

M&L for Precast cement concrte type B1 1:2:4 using 20mm graded stone agg set in CM (1:6) in cover slabs for manhole and similar articles etc. complete all as specified and directed

M&L for MS TMT bars 8 mm dia, cut to length, bend to shape required including cranking, bending and binding with MS wire not less than 0.90 mm dia or securing with clips.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even & fair w/o using extra cement.

Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds materials/stoppage and complete all as specified

M&L for RCC Class NP-2 pipe laid in trenches, jointed 150 mm internal dia of pipes as specified and as directed by Engineer-in-Charge.

M&L for concrete cement 1:3:6 type C-2 to drain pipes including packing under and haunching agaainst the sides of the pipes after they are laid and tested for 150mm internal dia of pipe

Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Supply and laying or fixing through pipe, 1100 volt grade heavy duty cable with XLPE insulated, armoured aluminium conductor 25 Sqmm 4 core nominal cross section in service connection stranded counductor all as specified and directed.

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 (part 24) : 2017 Part II of outer dia 77 mm and inner dia 63 mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete all as specified and directed

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked fixing accessories and sunken galvanized modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable galvanized steel box, plate with cover for mounting of switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following . - Note : Including Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith all as specified and directed.

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with with suitable galvanized steel box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall complete all as specified and directed

S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed

S&F switch flush type, 6 amp, single pole, two way complete all as specified and directed

S&F bell push, flush type, 6 amp 240 volts complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed

S&F socket outlet 3 pin, 6 amp, flush type complete all as specified and directed

S&F ceiling rose 3 terminal polycarbonate body complete all as specified and directed

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed

S&F door bell, Multi Music type AC, 240 volts, single pole complete all as specified and directed

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes complete all as specified and directed

2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

Supply and Fix LED Batten 20 watt tube light fiiting complete with light output at 120 lumen/watt including all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core 6500K ( fittings shall be fitted on two plastic square/round block. Note power factor should not be less than 0.90.CRI>85, Built in surge protection 4KV, operating voltage 140 to 300 V AC, IP 20 ingress protection complete all as specified and directed

Supply and Fix in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W i.e 120 lumen/watt including LED tube 2 feet long of same make having inbuilt drivers, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core,6500K , PF>0.9. CRI>85, Built in surge protection 4KV, operating voltage 140 to 300 V AC, IP 20 ingress protection complete all as specified and directed

S&F LED Lamp 9 watt, 230 volts, 180 lumen/watt complete all as specififed and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed

Supply and Fixing Flood Lights 100W with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance complete all as specified and directed

Supply and Fixing Bldg Security Light 20W made up of pressure die cast housing with prismatic polycarbonate diffuser and individual's LED with secondary optics and IP65 protection complete with fixing arrangement and connections complete all as specified and directed

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed

S&F MCBs of 'B' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Double pole 10 to 32 amp.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

S&F desert cooler electric driven (single phase), having nominal fir flow capacity of 5000 CuM per hour (or nearest size)(Steel Body) complete all as specified and directed

S&F fans ceiling complete with electronic type regulator and accessories 230V, 1200mm sweep, BEE 5 star rated complete all as specified and directed

DMA PROJECTS (BID ID -3252933)