Providing Fencing ,Lightning,pitching and other Utilities at Garden Near Hiran-2 Dam under Hiran-2 Irrigation scheme.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description Unit Rate Qty Amount

Providing, Fabricating and

Fixing G.I. Chainlink 2 10 X

gauge (Galvanised) incluiding

compound gate assembely (if

required) incluiding cutting,

welding, 1 Coat of Primer coat

over new matel surface and two

coats of enamel paints over all

the surfaces or Specified by

Engineer-In-Charge.

2 Steel work, welded in built up

sections framed work including

cutting, hoisting, fixing in

position and applying a priming

coat of red lead paint. (A)In

beams and joists, channels

Quintal 9108.48 38.63

angles Tees, flats, with

connecting plates or angle

cleats as in main and cross

beams. Hip and jack rafters,

purlins conneted to common

rafters and the like.

Painting two coats (excluding

priming coat) on new steel and

other metal surface with enamel

paint, brushing, interior to give

3 an even shade including Sqmt 96.59 188.35

cleaning the surface an even

shade including cleanicn the

surface of all dirt, dust and other

foreign matter.

Prov. & Laying in position

sement sensrete using cement

sand and crushed metal coarse

aggregate by mass and machine

mix for PCC/RCC ind uding

necessary formworks

compaction by vibrator,curing

4 as directed with I lead & li P etc Cum 2946.00 58.26

complete. (Excluding cost of stel

) FOR .BODY WALL, APRON,

TRAINING WALL, SIDE WALL,

SPLAY WALL, KEY WALL,

CUT OF WALL ETC.4/A)

Concrete (1:3:6) and MSA-40mm

(cement level 220 kg/cum)

Excavation in all sort of strata

and formations incl. depositing

the unuseful excavated stuff as

and where directed incl.sorting

5 and stacking useful materials in Cum 176.00 22.19

measurable conditions as

directed upto 200mt lead and all

lift etc. complete incl.

Providing supplying and fitting

to supply water for plant at Site

including necessary

sprinklre,pvc pipe,valve,elbo

and others as required and as

directed by Engineer in charge

Providing and laying dry rubble

stone pucca pitching without

base , inverted filter and header

stone but with 10 cms thick

murrum layer ( for base )

incl.hand packing and trimming

& dressing slopes etc

complete.b) 23 cms thick stone

pitching with pointing in C.M.

Providing and fixing 2.5 Metre

high fencing with 2.5 Metre long

Precast CC M25 Grade posts and

White Washing 2 coats fixed at

Mt,C/c. with Eight Horizontal

lines of galvanised steel barbed

wire weighting 9.38 Kg. per

Metre, strained and fixed to

posts with G.I,staples including

fixing the posts in ground with

0.5 M x 0.5.M x 0.5 M. block in

C.C 1:3:6 etc complete.

Supplying and erecting

approved make Octagonal pole

made from HR sheet steel. The

pole should be made as per IS.

and shall be coated with hot dip

galvanizing as per IS

2629/2633/4759, suitable

suspend local wind speed with

integral Junction box consist of

terminal plate of min 6mm

Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal

and arrangement for cable

9 termination to be erected With Each 5501.00 28.00

Suitable foundation (Included)

as per details given by

manufacturer considering site

requirementwith metallic base

plate of 300 mm x 300 mm x 4mm

thick for using as a compound

light pole with approx. weight

Kg(B) 4 Mtr. Long 70 mm Top X

130 mm bottom dia, 3 mm

200mmX200mmX12mm base

plate, 4-M16 Bolts and 450mm

long with necessary G.I. J Bolts

.Approx weight 37 kg

Supplying and erecting LED

street light 7 Flood light fittings

with High power White LEDs

wattage of 3 Watt and above

assembled on single MCPCB,

efficiency more than 130 Im/w

and corrosion free High

pressure die cast aluminium

housing with smooth finish

powder coated and heat sink

extruded aluminium with

diffuser and Polycarbonate

optics/ lenses with company

mark/name engraved or

embossed 160 to 270 V,Power

Factor more than 0.95, THD <

10 %, CCT 3000 K to

5700K,Uniformity ratio >20.45,

Luminaire efficacy>

lumens/watt. LED driver

efficiency > 85 %.( ftings

requirec LM-79 & LM-80

certificates)(NOTE: Below

description have shown ranges

of Wattage capacity of LED

fittings.The Engineer incharge

may select any wattage capacity

betweer the ranges shown.)

(A) Street Light (IP-65) Surge

protection -4KV integral and

,Light must have 440VAC line

supply with over- voltage

protection. (iii)above 24 to

Bollards (B) LED Bollard fittings

of minimum height 600 mm' &

dia.100mm having

polycarbonate clear/milky

diffuser mounted on 3mm thick

11 aluminium finished powder Each 3130.00 97.00

coated pipe with base plate

160x160mm with erection by

M8x75mm fastner with required

RCC foundation.IP65 for 9 to

watt ,surge-4kv- cat-ll

Providing and erecting

XLPE(IS:7098)()-88 ISI armoured

cable multistrand Aluminium

conductor for 1.1 KV. to be laid

on wall with necessary clamps or

in existing trench / pipe of

following size of cables.(c)

Making trench in Hard Murrum /

Tar Road of suitable width of

cm or required depth for laying

13 any size of cable or locating the Mtr. 74.00 1000.00

fault all over the run and back

filling the same and making the

surface as normal ground.

Providing and fixing LED garden

spike light of 6 watt capacity with

die-cast aluminium housing,

powder coated finish, adjustable

head with clear glass/PC lens,

mounted on heavy duty ground

spike, IP-65 protection and 2–4

KV surge protection, complete

with LED driver, PVC insulated

copper cable, connection,

testing and commissioning

complete as required.

Floor mounted pathway light

fitting of 6 watt capacity having

die-cast aluminium housing with

powder coated finish,clear

polycarbonate diffuser, IP-65

protection suitable for outdoor

garden pathway illumination,

fixed on kerb/footpath.

Providing and erecting Street

Light pole bracket comprising

main B Class MS pipe of

cm/require outside dia.

complete with suitable B Class

M.S. sleeve tubing of approx.

45cms.length and suitable for

76.5 mm /80mm / required size

of pole top having sufficient

fasteners for fixing the brackets

and having spread of 1.5.mtr.

length with 110 deg.with vertical

plane & suitable welded stays,

reducer and with check nuts

complete painted with one coat

of Red oxide / PU base primer

and two coats of Aluminium / PU

paint. paint with following nos of

arms. [A] Single Arm Bracket

Providing cement concrete.

foundation or for concrete filling

in 1:3:6 ratio with 20 to 25 mm

stone metal duly plastered with

necessary curing for pole

muffing or any other purpose.

Supplying & erecting approved

make SMC press moulded

composite FRP. loop-in, loop-out

approx. 2mm thick box

complete with Bakelite

connector strip 5way(3P+N+E),

18 DIN rail for mounting mob & Each 3387.00 28.00

hinged doors as per

requirement having locking

arrangements with mounting

clamp with nuts, bolts & washers

suitable for erection on pole with

cable clamps& earth bolt of

following size of box. (I) 400mm

x 300mm x 190mm [deep]

Supplying & erecting approved

make SMC press moulded

composite FRP. loop-in, loop-out

approx. 2mm thick box

complete with Bakelite

connector strip 5way(3P+N+E),

DIN rail for mounting mob &

hinged doors as per

requirement having locking

arrangements with mounting

clamp with nuts, bolts & washers

suitable for erection on pole with

cable clamps& earth bolt of

following size of box. (A) 300mm

x 200mm x 100mm [deep POLE

Providing & erecting 240 V MCB

double pole switch for motor &

inductive load (C Curve) having

20 10 KA breaking capacity & Each 238.00 28.00

confirms to IS: 8828 in existing

box having followina capacity

(a)6 to 32 amp cat i

Supplying & erecting funnel

type earthing having earth plate

of following size burred in

specifically prepared earth pit

mtr. below ground with 40 kg.

charcoal and salt with alternate

layers of charcoal & salt,

20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering &

bricks masonry block, C.I.

Cover complete as per para

of IS 3043 with necessary length

of double Galvanised Iron /

copper earth wire No 6 SWG

bolted with lug to the plate and

covered in 12 mm dia. G.I. pipe

2.5 mtr long complete

connected to the nearest switch

gear with end socket as per

direction & duly tested by earth

tester confirming to IS (As per

drawing) with following

specification (A) With 30 x 30 x

0.35 cms: C.I. earth plate

Providing annual maintenance

of garden, plantation and

22 lighting system including Job 293400.00 1.00

watering, replacement, minor

repair and upkeep for one year

I/We am/are willing to carry out the work at… ...................... % above/below

percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Description of Item Rate

Item (with brief specification

Quantity Unit In In Amount

No and reference to book of

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: No. MIS 102010/17/K1, dtd. 30/07/2018 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor Executive Engineer

Gir Somnath Irrigation Division