Shifting of Transformer and Generator sets of School of Agricultural Biotechnology, at PAU, Ludhiana

Amount

LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS): LT PANELS: Designing, Supply, Erection, Testing & commissioning of Outdoor Type LT cubicalpanel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.

The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.

LT panel enclousre having provision Main Incomer MCCB 630 Amp as per Item No. 34.23 B (ix) and included two no of Outgoing Mannual Changeover 400 Amp and 200 Amp repectviely different Gensets and BUSBAR Chamber for Loose Cables entry Outdoor panels complete in all respect as desired by the Engineer-in-charge at site.

Supply and Erection of Nut & Bolt for Installation of Existing Transformer complete in all respect as desired by the Engineer-in-charge at site.

Dismantling shifiting & installation existing genset 2 nos, foundation & existing cable at desired location complete in all respect as desired by the Engineer-in-charge at site.

SANT RAM KATHURIA

Baba Farid Engineering Co.

SANT RAM KATHURIA

Baba Farid Engineering Co.