Completion of Incomplete Dwakra Building in Settipeta (V) of Nidadavole (M),Est Cost Rs:-8.00 Lakhs

Name of the work:-Completion of Incomplete Dwacra Building in Settipeta (V) of Nidadavole (M) , Est.Rs. 8.00 Lakhs,15%W&CW ZPGF 2025-26 Funds Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402)

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd Class for basement including cost and conveyance of all materials and all labour charges etc complete.

Plastering with CM (1:5), to 12 mm thick including cost and conveyance of all materials and all labour charges etc Complete.

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly manufactured using UPVC reinforced profiles of 65 mm x 58 mm x 2.0 mm for outer frames, 52 mm x 43 mm x 2.0 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick Tinted glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work.

Flooring with Double charged Vitrified tiles of 1st quality of size 600mmx600mm set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixedFlooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., complete for finished item of work.

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,complete for finished item of work.

Painting to new walls with plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.excluding VAT and seigniorage charges and including overhead charges complete for finished item of work as per SS 911 for Internal walls

Painting to new walls with plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.excluding VAT and seigniorage charges and including overhead charges complete for finished item of work as per SS 911 for External walls

Supply and fixing doors with Sal wood frame of section 100mm x 72 mm and ISI marked flush door shutters/Powder coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type with Commercial ply on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of Sal wood frame, flush shutter including fixing the all fixtures to door 6 Nos of MS. Butt hings 125 mm long, 3 Nos of MS, tower bolts 175 mm long, 4 Nos of MS Handles 125 mm long, 2 No of 300 mm long Aldrop and 2 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200 mm x 2100mm)

Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned TW box including all labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi

supply and run of 1 of 14/0.3mm (1.0sq.mm) FR PVC insulated flexible copper cable in existing pipe for Earth continuity including all labour charges etc, complete. CATEGORY -I

Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and 2 runs of 4.0 sq mm PVC insulated flexible copper cable and 1 run of 2.5 sq.mm flexible PVC insulated copper cable for earthing in the existing conduit pipe for power point including labour charges for 16A sockets.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make : Finolex / RR Kabel / KEI

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes : Anchor Penta cherry/ Gold Medal Olive /Million Zoom

Supply and fixing of 16A/6A 3 pin wall plug socket with 16 A switch control with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply of Stepped type Modular Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge..

Supply & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminium housing and polycarbonate cover, input voltage AC 220-260 volts

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges without bulb (for new installation).

Supply and fixing 12 way SPN Distribution board with IP-43 protection (Metal Door) suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for flush mounting etc., complete. 40A Double Pole isolater 1 No 10KA 6-32 A range SPMCBS 8 Nos for Outgoing. Make: Miltec / Sputnik / Crystal / Bentec.

Supply , Fixing & Transportation of 0.5 HP Single Phase Mono Block CI Body Motor Pumpset Supply and erecting approved makecentrifugal water pump including all Labour charges for fixing complete for finished item of work. 0.5 HP SP Motor Makes(ELEC-5.4.11 CATEGORY- I) : Crompton / Texmo / Havells Hi-flow V2

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and fixing of OD pipe CPVC Pipes and Fittings SDR 13.5 Class-2 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site,labour charges for fixing, complete for finished item of work at all floor levels. Makes : Ashirvad/ Ajay/ Astral Flowguard or equivalent ISI Mark 28.60mm OD pipe 28.60mm OD Pipe

Supply and fixing of OD pipe CPVC Pipes and Fittings SDR 13.5 Class-2 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site,labour charges for fixing, complete for finished item of work at all floor levels. Makes : Ashirvad/ Ajay/ Astral Flowguard or equivalent ISI Mark 28.60mm OD pipe 34.90mm OD pipe

Providing and placing on Terrace Polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrangements & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges etc., complete.

Supplying and fixing CP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , complete for finished item of work in all floors.