Renovation of LK Canal Right side of bank from latifshah wier to road (Km 0.00 to Km 0.650)

Providing, laying, spreading and compacting of stone aggragates 22.4-53 mm size in 75 mm compacted thickness to water bound macadam specification including spreading in uniform thickness, hand packing. rolling with smooth wheel roller 80-100 KN in stage to proper grade and camber applying and brooming stone screening, binding material to fill up the interstices of coarse aggregate, watering and compacting to required density grading -3 as per PWD specification

Providing and appying prime coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate 0.7 kg/Sqm using mechanical means as per Technical specification claue 502

Providing and applying tack coat with bitumen VG-10 pressure distributor at the rate of 0.30 kg. per sqm on the prepared bituminous / granular surface cleaned with hydrulic broom as per Techinical Specification No. 503. As direction by the E/l

Providing, laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13 2 mm to 11.20 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades as per Technical Specification Clause 510 (Including labour Material T&P etc complete as per direction of E/I

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510.

Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding 0.50 meter in depth and earth work in enbankment to be in 0.20m layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m lift and 30m lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m distance as directed by the E/I

Brick Edging on both side of road of first class brick 8 cm wide and 12 cm deep laid with mud mortar complete.

Fabrication and supply sign board on angle iron framd 40X40X6MM 25X5MM flat iron board sand MS sheet and one coat of red oxide primer and fixing in position including cost of letter writing and transport at site with all material, labour T&P etc required for proper completion of work.