REPAIRS TO DRAIN ,BOUNDRY WALL ,PLASTERING, PATHWAY,HARDSTANDING AND MISC WORKS AT 29 FAD AREA UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Demolition of brick/stone masonry built in cement mortar all as specified.

Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in mortar CM 1:6, complete all as specified and as directed by engr-in-charge.

.-Ditto- As item no.2 above but Except bricks

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slabs. complete all as directed by Engr-in-charge.

M & L 15 mm thick cement plaster on brick wall in cement morat 1:4 and plastered surfaces shall be even and smooth without using extra cement complete.

M & L 15 mm thick cement plaster on brick wall in cement morat 1:6 and plastered surfaces shall be even and smooth without using extra cement complete.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. complete all as specified and directed.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.

Demolition of cement concrete (unreinforced) of any description and in any position not ohterwise specifically provided for .complete all as sspecified

M&L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base.

M&L for laying machine pressed precast concrete interlocking reflective coloured (Glossy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming incl demolition of old tiles or blocks etc.complete all as specified.

M& L Chequared Cement Concrete (Glossy finish) Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 incl demolition of old tiles or blocks etc.complete all as specified.

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.

M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed.

Extra for forming fair finished drain or channel 30 cm inner girth or more in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified

M&L PCC type B1 1:2:4 (20 mm Gr. Agg ) 50mm thick as in leveling course for floor finishes etc all as specified and as directed.

Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed.

M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

Demolition of and breaking up drain pipes (salt glazed ware) 450 mm dia set in cement mortor complete all as specified.

Demolition of and breaking up drain pipes (salt glazed ware) 300 mm dia set in cement mortor complete all as specified.

Demolition of and breaking up drain pipes (salt glazed ware) 200 mm dia set in cement mortor complete all as specified.

M&L for 450 mm bore Reinfirced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified.

M&L for 300 mm bore Reinfirced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified.

M&L for 200 mm bore Reinfirced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified.

M& L for PCC 1:4:8 type C-2, (using 40mm graded stone aggregate) as in bed of drain for 450mm bore pipe incl packing under and completely surrounding pipes with concrete after they are laid and tested for 300mm dia pipes complete all as specified and ditected by Engr-in-Charge.

All as item No. 32 above but for 300 mm dia RCC pipe.

All as item No. 32 above but for 200 mm dia RCC pipe.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

M&L for machine cut kota stone slab flooring 20-22 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing to receive mirror finish over 20 mm th screed bed in CM 1:6 complete all as specified and as directed.

Ditto all as above item ser No 36 but on skirting over 10 mm th backing coat in CM 1:4 complete.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete.

M&L Machine cut kadappa stone slab 20-25 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match.

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises.

M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in sub base for leveling course.complete all as specified.

M&L for joint free non-skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor.

Ditto above item No 42 but on skirting over 10 mm th rendering in CM 1:4 complete.

M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.

M & L Glazed ceramic coloured tiles 300 mm x200 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.

M&L for vitrified coloured tiles 8 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete

Ditto above item No 46 but on skirting over 10 mm th rendering in CM 1:4 complete.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for 75 mm thk Cement conc type C-2, 1:3:6 (40 mm grade Agg) as in plinth protection finished even and fair .

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

H S TAKHI

KARPE AND SONS CONSTRUCTION

M/S B.A. GAIKWAD

Samyak Engineers

RAMESH PATIL

DR J S CHADHA AND SONS

Star Construction

Santhi Enterprises