LOT 1 Restoration of Residential Colony situated at Joya in District Amroha.

Amount

Scraping old colour or white washing/ snowcem/cement

Dismantling old plaster including raking out joints and disposal of defuse within 60 meter also include all cost of labour

12.50 mm thick Cement plaster with cement mortar in proportion of 1:6 (1 cement : 6 coarse sand) Neat cement punning i/c cost of all material, labour and T&P etc complete including making groove in plaster.

Dismantling door or window including chaukhats but encluding hold fast and including stacking of materials as directed by engineer in charge with in a distance of 60 meter.

Providing wall putty on all surface with approvel quality material of berger/J.K./Birla or similsr make two coat.

Snowcem washing in two coats including all material T&P etc.

Dismantling cement concrete or brick or granolithic floor including base concrete and including stacking of dismantled material as directed by engineer in charge with in a distance of 60 meter.

P/L integral cement based water proofing treatment BIRCK KOBA including preparation of surface as required for treatment of roofs, consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 including adjoining walls upto 300 mm height. b) Laying brick bats with mortar with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 to required slope including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Supply & fixing 32mm of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally

Applying primer coat over new wood work and other metal surface after paint including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel /wood scraper sand preparing and knotting including cost of all supply of material ,labour,and t&p etc. required for proper completion of the work

Painting first coat over primer coat (but excluding cost of primer coat) on wood or steel other metal surface with superior synthetic enamel paint of standard make brushing to give even shade and finish and including cleaning surface dirt and other foreign matter and scoured with wire brushes fine steel /wood scraper sand preparing and knotting including cost of all supply of material ,labour,and t&p etc. required for proper completion of the work.

Painted old surface (but excluding cost of primer coat) on wood or steel other metal surface with superior synthetic enamel paint of standard make brushing to give even shade and finish and including cleaning surface dirt and other foreign matter and scoured with wire brushes fine steel /wood scraper sand preparing and knotting including cost of all supply of material ,labour,and t&p etc. required for proper completion of the work.

M.S. or iron work of small size and Door and Window frame such as holding down bolts, hold fast, tie rod grating etc. brought to required from including supply fixing reqired for proper completion of the work

Providing and fixing fly proof galvanised M.S.wire gauge to windows clerestory windows and door with second class teak wood beadind 62x19 mme. galvanised M.S. wire gauze with 0.63 mm dia wire and 1.40 mm wide aperture both side including cost of all materials, labour, tools and plants etc. required for proper completion of work.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty with Float glass panes of nominal thickness 4 mm including cost of material, labour and T&P etc.

Laying of 25 mm thick KOTA stone of size 45x45cm and above flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the dirtection of Engineer in-charge including cutting polishing with wax polish including supply of all materials labour and T&P etc required for proper complition of work

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings 32 MM DIA SEMI RIGID

Supply and fixing PVC pipes 75MM (working pressure 6 kg / cm²) Single socketed pipe i/c cost of all material, labour and T&P etc complete. 75MM dia

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including cost of material, labour and T&P etc.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal dia including cost of material, labour and T&P etc

Supply and fixing PVC pipes 100MM (working pressure 6 kg / cm²) Single socketed pipe i/c cost of all material, labour and T&P etc complete. 75MM dia

Providing and placing on terrace polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and over flow pipes but without fitting and base support for tank 7.1*500=3550.0

Providing and fixing white vitreous china wash basin including making all connection but excluding the cost of fitting size 630x450 mm

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S Trap, 10 litre low level white P.V.C. Flushing Cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Viterous China Orissa pattern W.C. pan of size 580x440 mm with internal type foot rests.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washners complete.

Providing and fixing Bright finished brass 150 mm brass tower bolt (barrel type), with necessary screws etc complete

Providing and fixing Aluminium Handles (125 mm) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc complete

Providing and fixing Aluminium Sliding door bolt ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc complete(300x16mm)

Supply amd wiring of sub main with two number 4 sq mm FRLSH PVC insulated 1100 v grade multistandersd single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit with one number 14 SWG copper earth continuity wire complete in all respect

Supply & Wiring of Submain FRLSH PVC insulated 1100Vgrade single core copper conductor cable in 20mm heavy duty PVC conduit with one no. 2.5 sqmm FRLSH PVC insulated multistrand copper conductor cable as earth contunity wire drawn in conduit.

Wiring points for fan and light duty exhaust fan. with 1.5 sq.mm. PVC insulated single core aluminium condutor cable in PVC conduit pipe on surface, complete with 1.5 sq. mm. PVC insulated aluminium conductor cable as earth continuity wire piano type switch and ceiling rose on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respects.as directed as per direction of Engineer in charge.

S&F of16 amp 240 V DP metal clad rewirable type switch fuse unit on M.D.F.E.G/ Teak wood board complete in all respect

S&F of 32 amp 240 V DP metal clad rewirable type switch fuse unit on M.D.F.E.G/ Teak wood board complete in all respect

Supply and erection of 63 amp tpn tap off box on rising main complete with hrc fuse etc. complete in all respect .

S&F OF 6 Amp to 32 amp SPMCB (10KA)C CurveCAT A

Erection and testing of ceiling fan and regulator for room height upto 3.5 m i/c supply 3 mm thick G.I. pipe 19 mm dia duly painted complete in all respect .

Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finish properly compelete in all respect deducation item no 1121

Supply and fixing of power plug with 15 amp /250 volt flush type switch and 5 pin 15a/250 v flush universal socket in suitable M.S. box of 175 mm x100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and fixing of power plug with 20 amp /250 volt flush type switch and 5 pin 20a/250 v flush universal modular socket switch on concealed M.S. box i/c all material labour T&P etc required for proper completion of work.

Providing and fixing 28 mm thick PVC Bath DOOR door shutter made of soild PVC foam profile with homegenous fine cellular structure having smooth outer integal skin having 71 mm width &28m thick as vertical &horizontal styles joints are made using solvent adhesive.

Providing and fixing JALI DOOR 30mm thick wire gauge shutters using galvanised M.S. wire gauze with 0.63 mm dia wire and 1.40 mm wide aperture for windows,clerestory windows and door.ISI marked bright finished off/black enamelled M.S.B. including cost of all materials, labour, tools and plants etc. required for proper completion of work.

S &F of LED tube light with batten suitable for upto 1x22 watt led tube light completed

Repanting letters super high grade enamel paint (such as dhalimar ,narolac etc) including supply all material, labour and T&P required proper compelete work 8cm to 15 cm

Centering & shuttering of Plywood or steel for Slab and RCC work i/c all cost of labour & T&P etc complete for proper completion of work

Earth work in filling in ordinary soil including 1 KM lead & 1.50 m lift complete including watering and ramming as directed by Engineer-in-Charge.

C.C. Work M-10 (1:3:6) (Cement: Coarse sand: Stone grit) including all cost of material, labour, Machinery etc Complete.

C.C. Work M-20 (1:1.5:3) (Cement: Coarse sand: Stone grit) including all cost of material, labour, Machinery etc Complete.

Steel Reinforcement for R.C.C. Work including straightening ,cutting,bending ,placing in position and binding with binding wire and also include the cost of steel etc complete

Laying of I shaped precast Interlocking tiles of thickness 100mm (Rubber moulded Grey) (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work including cost of material, labour and T&P etc.

Laying of I shaped precast Interlocking tiles of thickness 100mm (Rubber moulded red) (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work including cost of material, labour and T&P etc.

Ist Class Brick work in 1:6 cement mortar includes all Labour, Machinery & T&P etc Complete as directed by Engineer in Charge.

providing and fixing hand rail of approved size by welding etc. to steel ladder ralling. Balcony railing and staircase railing including applying a priming coat of approved steel primer ms tube

Dismantling Brickwork in Cement mortar and including stacking of material within a distance of 60 m as per Direction of Engineer in Charge.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular sub base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per technical specification clause 502.

Providing and applying Tack coat with VG-10 Bitumen over bituminous surface at the rate of 0.35kg per sqm on the prepared bituminous surface cleaned with hydraulic as per technical specification clause 503.

Providing laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumin or emulsion to required line, grade and level to serve as wearing course on a previously prepared bae including mixing in a sutable plant laying and rolling with a tree wheel 80-100 KN static roller capacity , finish to required level and grades to be followed by sal coat of type c as per technical specification clause 508

Providing and laying seal coat sealing the voids in a bituminus surface laid to the specified levels ,grade abd cross fall using type -c as er technical specification Clause 510

Patch Repaire Of Painted kilometer with tar or bitumen (Labour only )including heating of the Paint up to the required temprature pouring it on the surface spreading of necessary quantity of grit and ramming hard the same with hand roller or rammer also including cleaning with brush etc the existing surface after scarifying it to the water bound surface in rectangular shape and spreading the dismanteled matarial on the patries as directed by engineer in charge including fuel wood etc but excluding cost of grit and bitumin

Providing and fixing Chlorinated Pollyvinyl Chloride (CPVC)pipes having thermal stability for hot & cold water supply i/c all CPVC plain & brass threeded fitting This includes jointing of pipes & fittings with one step CPVC solvent cement trenching reflling & testing of joints complete as per direction of Engineer in charge. For 32mm nominal outer dia pipes

Same as per item no 59 but for 20 mm nominal outer dia pipes

Supply and erection of 32 amp TPN Rising main complete With HRC Fuse etc complete in all respect

Supply and erection of 63 amp TPN Rising main complete With HRC Fuse etc complete in all respect

Supply and erection of 100 amp TPN Rising main complete With HRC Fuse etc complete in all respect

Supply and erection of 200 amp TPN Rising main complete With HRC Fuse etc complete in all respect

Wiring points for fan and light duty exhaust fan. with 1.5 sq.mm. PVC insulated single core aluminium condutor cable in PVC conduit pipe on surface, complete with 1.5 sq. mm. PVC insulated aluminium conductor cable as earth continuity wire piano type switch and ceiling rose on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respects.as directed as per direction of Engineer in charge.

Supply and fixing of call bell of approved make on polished MDFEG/teak ply board including making connection etc complete in all respect

Eraction and testing of exhust fan on the existing hole with suitable size of rag bolt nuts and washers etc complete in all respect

Supply and laying of aluminium conductor PVC Insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a sushion of 75 mm thick sand all around and protected with burnt brickes on side and on top on surface the cable run shall be fixed ms clamps etc. For 6 Sq mm 2 core

Same as per item no 68 but for 10 Sq mm 2 core

Same as per item no 68 but for 16 Sq mm 2 core

Same as per item no 68 but for 4 Sq mm 3 core

Same as per item no 68 but for 6 Sq mm 3 core

Providing and fixing glass strips of 4mm thick in joints of floor and skirting at the time fo laying Including labour, T&P etc. complete in all respect.

Cement concrete (1:2:4) floor upto 40 mm thick finished with a floating coat of neat cement with base concrete.

Sath Shaib Associates (BID ID -4916867)

Rakendra kumar mishra (BID ID -4916053)

Arvind Kumar (BID ID -4919552)

M/S S R CONSTRUCTION (BID ID -4920042)