PWD/SE/KEC/NIT-01/20-21

Amount

Supply and Delivery of Hooded type Feeder Piller Box of size 1425x1000x500mm with both side opening & accessable door and locking arrangement made of 5mm M.S plate fixed to be on massonary base as per dirrection of EIC. The box should be comprising of the following accessories: 1) S&F 415V, 63A TPN SFU with 3nos Fuse link ---1no. as incoming 2) S&F 415V, 32A TPN SFU with 3nos Fuse link-- 3nos 3) S & F 415V, 200A ,Copper busbar Chamber (40x6 for Phase & neutral)---1no 4) S & F Time switch GIC make type FM quartz----2nos 5) S & F 3-Pole power contractor -2nos 6) Auto/Manual Toggle switch ---2no 7) Diode type neon Indicator Lamp (R,Y,B)-3nos 8) S & F 415V, 300A, capacity 4 way Bakelite terminal AC/DC make ---3nos 9) S & F 3/4" wide wooden plank of size 1000x900mm ---1No The complete arrangement must be wiring by suitable size PVC insulated Cu wire with suitable sockets/lugs. (Accessories Make- L&T/Siemens/ABB)

Errection of Feeder Piller Box of above size on 10" brick padestal of 10" size 1200X1200X600mm (height 600mm bellow Goround leveland 600mm above G.L) incl.sand cement plastering and neat cement finishing. Inside the brick padestalwill be filled up by loose sand where the incoming & outgoing cable will be rest

Supply & delivery of 12.0 Mtr Long MS Steel Tubular Pole (Bottom Length 5.8 Mtr, dia 165.1 x 4.85 mm, Middle Length 3.10 Mtr, dia 139.7 x 4.50 mm, Upper Length 3.10 Mtr, dia 114.3 x 3.65 mm, weight 197 Kg) including S&F of Sole Plate, Top Cover. (Designation 410 SP - 59 ) (Mk. Bansal Utkarsh / Jindal).

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly---Upto 12.0 mtr. Size 0.6x0.6x1.70 mts

Extra on items 4.00 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Making slot cutting and jacketing by 3mm M.S. Sheet to the pole for cable in and out upto a avg. hight of 4' from G.L. to the above pole as per design approved by the EIC incl arrangement for cable gland and S&F 4-Way terminal block above wooden board

S & F 1.5 mtr. Long 40mm dia detachable type Triple arm bracket with pole sleeve made of 50mm dia M.S. Black pipe having 2 nos. through nut bolts with 6nos. Set screw.(120 degree apart and 15 degree inclined with horizantal plane) as per design approved by EIC

S & F 1.5 mtr. Long 40mm dia detachable type Twin arm bracket with pole sleeve made of 50mm dia M.S. Black pipe having 2 nos. through nut bolts with 6nos. Set screw.(180 degree apart and 15 degree inclined with horizantal plane) as per design approved by EIC

Supply and Laying one No. cable 4 core 16 sqmm Al armoured cable in existing pre-laid pipe. The cable should conform to IS: 7098(Part-I):1988/1554 (Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984 / 3975:1970 /8130:1984/ 3961:1967/ 10418:1982 / 10810:1984 as amended upto date, in respect of component materials and tests. (PWD approved make)

Supply and Laying one No. cable 4 core 25 sqmm Al armoured cable in existing pre-laid pipe. The cable should conform to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984 / 3975:1970 /8130:1984/ 3961:1967/ 10418:1982 / 10810:1984 as amended upto date, in respect of component materials and tests. (PWD approved make)

Supplying and fixing compression type gland and finishing the ends complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of PVC armoured cables (a) 4core 16 sqmm

Do-----Do-----Do (b) 4core 25 sqmm

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint---(i) One coat of red lead/Zinc chromate priming (ii) 1st coat of synthetic enamel paint over the primer(iii) 2nd coat of synthetic enamel paint over the 1st coat

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required---- 2 x 36/0.3 (1.5 sqmm)

Supply & fixing street light minimum 250 watt LED luminaries along with (lumen efficiency not less than 120 lumen per watt) with ncy fixing arrangement with 5 years warranty (Make: Philips-ModeNo BRP 322 LED 312 CW NR/WR FG S4 XTFC L GR or similar of Crompton/Wipro) LED fitting should be warrented for 5 years by the Manufacturer. LM-79 & LM-80 Test Report/Certficate from the Manufacturer should be uploaded.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By Tata-Medium GI pipe

Excavation of Blacktop Road/Morrum Soil and filling & ramming.

Excavation of soil for installation of Earth Electrode and filling & ramming.for Soft Soil

Dismantling of the existing all type of light fittings and handing over these dismantled items to the existing local authority

Dismantling of the existing damaged poles (icluding uneven poles height wise) and handing over these dismantled items to the existing local authority

Micro tunneling including supply of HDPE pipe 40mm dia as per appropriate specification in single lengths for each individual tunnel.

Bituminious Road cutting by using Jack Hamour Compressor Machine, Fuel, Mobile, Compressor Operator and Three Breaker

Dismantling and withdrwing the existing cable from S.T pole and excavation the soft/hard soil for entering the new cable including depositing the damaged cable to the local authority. N.B: (a) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. (b) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. (c) If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

RELIABLE CONSTRUCTIONS

JADOB ELECTRIC CO.

RASH ELECTRICAL WORKS

T.D.K. ENTERPRISE

KANJILAL and SONS

C. CHOWDHURY AND CO

JAYBEECO

M/S N. C. HORE