Road safety work on various roads in Auraiya district

Repeted Bar Marking with HotApplied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

TRAFFIC SIGNS - HAZARD MARKER Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

60 cm equlateral tringle with diffnitation plate (,Kakor SH 21

60 cm equlateral tringle with Rumble Strip (JuaBr, Vaisundhara Junction @ MDR, PBRP Sehud,,Kakor SH 21

60 cm circular with diffnitation plate (JuaBr, Vaisundhara Junction @ MDR, PBRP Sehud,,Kakor SH 21

Reflective Raised Pavement Markers (Road Studs/Cat Eye)- Supply and fixing of relective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylontrite) of HIPS (Hi impact Polystyrene) of acrylonitrile butadiens styrenc (ABS). The marher shall supported a load of 1355 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35 + 50 to base and ares of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100mmx100mmx10mm, 9C/c

Providing and fixing of Standard Metal Delineator as per IRC 79- 2019 of minimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non metalic retro reflective sheeting on each side conforming with IRC 67-2012 and meeting the coefficient of retro reflection values as per ASTM D minimum 40 microns thickness. The delineator shall be painted with powder coat of pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of te delineator should be curved with a radius of not more than 200mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree to increase the visibility of the delineator for veghicles moving in continuous curves, The delineator shall have grooves across the length to mage the reflective sheets vandal-proof) The retor reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & Proof of the same in form of government report shall be uploaded which quoting tender. If somehow tendor pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median traffic islands, dangerous bends, roundabouts,narrow bridges etc. of as desired by site engineer.