Repairs for Govt. Girls Middle School at Budgam

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundatiodisposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-

Providing and laying of stone soling nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, approved nearest sources to site of work complete

Dismantling doors, windows and clerestory windows (steel or wood shutter including chowkhats, architrave, holdfasts etc. complete stacking within 50 meters lead :Of area of 3 sqm. and below

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material \within 50 meters lead as per direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade including curing but 1;4;8 excluding the cost of centring and shuttering. All work upto plinth

Providing and laying in position cement concrete of specified grade including curing but 1;3;6 excluding the cost of centring and shuttering. All work upto plinth

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) counter slab

Centering and shuttering including strutting, propping etc. and removal of form for: found

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level vide item above

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2mm thick

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4 incl carriages complete job

12 mm thick cement plaster in 1:4 mix

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 Size of tile 600x600m m

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete 19.2.1.3 PN-16 pipe , 25mm OD(SDR-7.4

Providing and fixing PPR Unions 19.2A.2 PPR Union 25mm

Providing and fixing of 15mm niminal bore C.P. brass angle value for basin mixer and geyser points of approved make conforming to IS 8931

p/f of 100 mm dia pvc pipes type B incl all fittings and joints

p/f of 75 mm dia pvc pipes type B incl all fittings and joints

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm Thick

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200mm

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (15 mm nominal bore).

carriage of materilas by MT

Stone agg lead of 10 km

sand lead of 20 km