Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAdmitted-Finance 00 AGRA AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | ₹1.1 L | L1 | Admitted-Finance |
| 2 | L2₹1.1 L+₹1,050.26 (0.99%)Admitted-Finance HIMACHAL PRADESH HP | ₹1.1 L+₹1,050.26 (0.99%) | L2 | Admitted-Finance |
| 3 | L3₹1.1 L+₹3,019.06 (2.85%)Admitted-Finance GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | ₹1.1 L+₹3,019.06 (2.85%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Ajay Kumar L2 | Rakesh Kumar L3 | PAWAN KUMAR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation In Foundation And Trenches Etc. Including Dewatering/ Bailing Out Or Pumping Out Water During Excavation In Foundation.in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each deposited layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres. and to the entire satisfaciton of Engineer-in-charge. | 31.42 | cum | 1,070 ₹33,619.4 | 1,090 ₹34,247.8 | 1,047 ₹32,896.74 Lowest |
| 2.00 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars, ladders, railling, brackets and similar works. | 0.7 | Qtls | 11,030 ₹7,721 | 11,050 ₹7,735 | 11,000 ₹7,700 Lowest |
| 3.00Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in. | ||||||
| 3.01 | in foundation and plinth | 1.62 | cum | 9,530 ₹15,438.6 | 9,550 ₹15,471 | 9,500 ₹15,390 Lowest |
| 4.00Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain concrete work in. | ||||||
| 4.01 | Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like. | 7.2 | sqm | 415 ₹2,988 | 435 ₹3,132 | 400 ₹2,880 Lowest |
| 5.00Providing circumferential butt welded joints by electrical arc welding to below mentioned dia and wall thickness MSERW/GMS pipe welded in three number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 including Die pentration test, at site of work complete in all respects, including manual/machanical handling of pipe in all leads and lifts to the entire satisfaction of Engineer in charge. | ||||||
| 5.01 | 65 mm dia | 10 | Joints | 310 ₹3,100 | 330 ₹3,300 | 300 ₹3,000 Lowest |
| 6.00 | Providing and fixing double flanged cast steel Sluice valve of 65 mm dia of Vir Kartar Kirloskar / Leader/KSB make toconforming to BS: 1414/API-600 Class ASA-300 ncluding M.S. flanges as per IS 6392-1971 table-17 includingwelding of flanges and capable of with tanding of normal seat pressure with upto date endments includingcarriage within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | each | 44,050 ₹44,050 | 45,000 ₹45,000 | 44,000 ₹44,000 Lowest |
Tender Value
₹1.2 L
EMD Value
₹2,400
Closing Date
9 Sept 2026, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Dharampur Bharari
Deposit work (NDF/2026/71) Restoration of rain damages LWSS Bid Bantloo in GP Sajao Tehsil Dharampur Distt. Mandi HP
2026_HPIPH_142413_1
7029-78 Dated 31-08-2026
Open Tender
Civil Works
Item Rate
90 days
Dharampur
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
Executive Engineer
₹2,400
15 Sept 2026
31 Aug 2026
10 Sept 2026
31 Aug 2026
9 Sept 2026
31 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation In Foundation And Trenches Etc. Including Dewatering/ Bailing Out Or Pumping Out Water During Excavation In Foundation.in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each deposited layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres. and to the entire satisfaciton of Engineer-in-charge. | 31.42 | cum | 100 | ₹3,142 |
| 2 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars, ladders, railling, brackets and similar works. | 0.7 | Qtls | 100 | ₹70 |
| 3Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in. | |||||
| 3.01 | in foundation and plinth | 1.62 | cum | 100 | ₹162 |
| 4Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain concrete work in. | |||||
| 4.01 | Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like. | 7.2 | sqm | 100 | ₹720 |
| 5Providing circumferential butt welded joints by electrical arc welding to below mentioned dia and wall thickness MSERW/GMS pipe welded in three number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 including Die pentration test, at site of work complete in all respects, including manual/machanical handling of pipe in all leads and lifts to the entire satisfaction of Engineer in charge. | |||||
| 5.01 | 65 mm dia | 10 | Joints | 100 | ₹1,000 |
| 6 | Providing and fixing double flanged cast steel Sluice valve of 65 mm dia of Vir Kartar Kirloskar / Leader/KSB make toconforming to BS: 1414/API-600 Class ASA-300 ncluding M.S. flanges as per IS 6392-1971 table-17 includingwelding of flanges and capable of with tanding of normal seat pressure with upto date endments includingcarriage within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | each | 100 | ₹100 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Form6.pdf
Tender Documents • 0.79 MB
Form8.pdf
Tender Documents • 1.28 MB
TC.pdf
Tender Documents • 0.28 MB
BOQ_211582.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .