Repair and maintenance of Gen room,Street lights, Security lights,Garden lights , Motor pumps,Ac,Fan etc at HQ 42 BN BSF campus Fatikchera (SH Repair and maintenance of Gen room, panel switch gears and Street lights)

Providing & fixing MCCB, 250 amps, 3 pole, breaking capacity 25 KA, with suitable operating mechanism extended rotary handle in existing cubicle panel board including drilling holes in cubicle panel, making connections and dismentling of existing Switch gears etc. as required. Make C&S, Havells, L&T, ABB, Indo asian etc.

Providing & fixing of 125 amps, 415 volt, type FN(TPN) switch disconnector fuse unit in sheet steel encloser with suitable for DIN fuse link with door inter lock & pad lock facility, drilling holes i/c 04 Nos bolted fuse link cat. No.IHHTSD0125 and complete with connections, testing and commissioning and dismentling of existing fuse switch units (disconnectors) etc as required.

Supplying & fixing 4 pole on load change over switch, 125 Amp, 415 volts, 50 Hz in sheet steel enclosure including suitable size fastener/nut bolts for installation) and making connections etc. as required. Make - Havells/L&T/Standard/C&S etc

Repairing of 25/45 watt LED security light already installed on the steel pole / bracket including dismentling and reinstallation on street Pole/ Bracket along with all connections etc as required

Repairing of 70/100 watt LED Flood light already installed on the steel pole / bracket including dismentling and reinstallation on street Pole/ Bracket along with all connections etc as required

Supplying & fixing of SMC enclosure of size (140 x 140 x 95) mm with 6 amp SP MCB, terminals and accessories etc. as required. Make Sintex or equivalent

Supplying and fixing of FR PVC sheathed multicore round felxible industrial cable with bright annealed copper bare conductor working voltage upto 1100 V conforming to IS-694 of following size 2x1.5 Sqmm make KEI/Havells/Polycab/RR etc.

Supplying and fixing 200 amp 4 Way,415 Volt made of ETP grade copper Busbar Chamber complete with connection testing and commisioning etc as required.

PITC of outdoor type feeder piller, double door made out of 2 mm CRCA sheet duly primed & painted with synthetic enamel gray paint of required size 300 mm deep including SITC of 200 amps, 04 nos insulated aluminium bus bars,P & F of internal connection with suitable size copper wires lugs, following accessories & angle iron frame of suitable size made out of 45 mm x 45 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (Face area should be measured.)