MAINT OF ALUMINIUM, PVC, STEEL JOINERY AND FALSE CEILING TO BLDGS AT SOUTH SIDE OF RUNWAY AT AF STN JODHPUR

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down of shutter of any description, area exceeding 1 Sqm complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1.0 Sqm complete all as specified and as directed.

Dismantling boarding/ partition/ cladding of any description, fixed in any position with nail/ screw complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down of old deteriorated railing complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grained PVC sheet and edges will be painted to match with printed sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engineer-in-Charge. Note:- Stainless steel butt hinges and necessary SS screws shall be measured and paid separately under respective items.

M&L for 30mm thick flush shutter solid core construction with block board core and both face covered with decorative face veneer lipping with frame to match complete all as specified and as directed.

S&F stainless steel barrel tower bolts of 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel handles 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel sliding door bolt with hasp, staple bolt type and fixing clips of sheet of 300mm long complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel butt hinges of size 100mm complete all as specified and as directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification and drawing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with particle board core with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face complete all as specified and as directed.

S&F anodised aluminium frame/ shutter section for doors, windows, ventilators, partition etc with one or more rebates including joining cleat for fixing complete all as specified and as directed.

Add extra for powder coating on above item (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S&F 4.8mm thick sheet glass ordinary quality in square exceeding 0.50 Sqm each in each pane including necessary rubber beading etc. complete all as specified and as directed by Engr-in-Charge.

S&F 12mm thick prelaminated particle board, interior grade prelaminated both side of approved colour lamination, fixed with screws to any type of frame work complete all as specified and as directed by Engr-in-Charge.

S&F butt hinges, medium weight, cold rolled mild steel of size 100mm complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extuded section and fixed of 150 mm long complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type, anodised of 150mm long complete all as specified and as directed.

S&F in repair 150mm floor door stopper of aluminium alloy powder coated, with hard drawn steel spring complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed.

S&F in repairs cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repairs 20mm dia with 1 mm wall thickness drapery rod in any length, high strength stainless steel pipe including bracket/ finials as required complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/ spring clips etc. complete all as specified and as directed.

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm each in each pane complete all as specified and as directed.

S&F in repair venetian blinds, vertical/ horizontal type, pattern as directed 100mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons/ loops etc., fixed cuttings and alteration if necessary wherever AC/ coolers exists complete all as specified and as directed.

M&L in repair for 2.0 mm thick PVC tiles/ sheets, laminated plain coloured, homogeneous finish, laid with approved rubber based adhesive in floors complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 12mm thick perforated particle board/ tiles for insulation and accoustic purpose 60cm x 60cm in size fixed with staples on snap grid including preparation of surface and applying two coats of oil bound distemper on new or previously untreated surfaces of ceiling in patch work complete all as specified and as directed by Engr-in-Charge.

S&F solid PVC wall lining consisting of 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F in repairs 12mm solid PVC ply of 1st quality of both side white colour fixed with necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc. complete all as specified and as directed by Engr-in-Charge.

S&F solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repair stainless steel peg set of 06 hook complete all as specified and as directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E-165 including dismanting of old framed work complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repair 18/ 19 mm thick PVC moulded solid board, decorative of approved colour for cabinet boxes, shutters etc. with shelf and shutters full size fitted including coloured topping on all exposed edges under/ above kitchen cooking platform and other platform complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings.

S&F in repair continuous (piano) hinges width of flap 30 mm mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F in repair stainless steel handles 75mm long complete all as specified and as directed by Engr-in-Charge.

S&F in repair magnet catches fitting fixing at site with necessary arrangement, screws, strikes etc. complete all as specified and as directed.

Dismantling old unserviceable, rusted, broken (corrugated/ semi corrugated, etc.) asbestos cement/ any type of sheets in ridge and roof coverings complete all as specified and as directed by the Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated trapezoidal shape steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 50mm wide anti skid/ anti slip heavy duty black and glow self adhesive tape of make- 3 M or equivalent fixing on slippery floor/ staircase/ ramp etc. of approved colour and design complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, disposal of unserviceable materials, debris and rubbish outside MD land complete all as specified and as directed by the Engr-in-Charge.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) (nominal mix) as in fins, fascias, louvres, chajjas, shelves and similar articles complete all as specified and as directed. Note:- The rate quated by the contractor os inclusive of necessary formwork as directed by Engr-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for welding in repairs exceeding 2.5 cm and not exceeding 5 cm in length and thickness of metal not exceeding 6 mm complete all as specified and as directed.

S&F in repair solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors of best quality complete all as specified and as directed by Engineer-in-Charge.

Please Enable Macros to View BoQ information