Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAdmitted-Finance HIMACHAL PRADESH HP | L1 | Admitted-Finance | |
| 2 | L2₹1.7 L+₹4,301.50 (2.54%)Admitted-Finance HIMACHAL PRADESH HP | L2 | Admitted-Finance | |
| 3 | L3₹1.8 L+₹8,401.30 (4.96%)Admitted-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GULZARI LAL L2 | Raj Kumar Prop R.K. Construction L1 | Rajesh Kumar L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 93.66 | Cum | 420 ₹39,337.2 | 395 ₹36,995.7 Lowest | 450 ₹42,147 |
| 2.00 | Repair of gravity main by Cutting and Welding of GI Pipe diameter mentiond below i.e. by Butt Welding with gas welding two layers including cost of cutting of GI Pipe and carriage of welding set / DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts.80 mm diameter | 185 | Joints | 550 ₹1,01,750 Lowest | 550 ₹1,01,750 Lowest | 560 ₹1,03,600 |
| 3.00 | Manufacturing laying and jointing of GI bends of following dia (MC) of required degree conforming to relevant specifictions upto date ammendments having wall thickness mentioned below. The joint shall be jointes circumferencial butt welded joint wah croumferencial butt welded joints by electric arc welding in requisite what of weld rune so as to achive the ma the minimum effective thorat thickness and electrodes of 250 mm to 6.30 mm of Advani Gedikion (Ador) CITOUET / Faab length of weld conforming to 15816100 specification by using welding make conforming to 158141001. af site of work complete in all respects and to the entire satisfication of Engineerin Charge. 80mm dia | 28 | Nos. | 1,170 ₹32,760 | 1,100 ₹30,800 Lowest | 1,150 ₹32,200 |
Tender Value
₹2.0 L
EMD Value
₹4,000
Closing Date
21 Sept 2026, 10:00 amClosed
Executive Engineer
EE JSV Mandi
Repair and maintenance of Rising main by cutting welding and testing of old GI pipe 80mm dia at various RDs 1sr and 2nd stage under Jal Shakti Section Dhanyari
2026_HPIPH_143240_1
12442-541
Open Tender
Repair and Maintenance Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
₹4,000
24 Sept 2026
11 Sept 2026
21 Sept 2026
11 Sept 2026
21 Sept 2026
11 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 93.66 | Cum | - | - |
| 2 | Repair of gravity main by Cutting and Welding of GI Pipe diameter mentiond below i.e. by Butt Welding with gas welding two layers including cost of cutting of GI Pipe and carriage of welding set / DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts.80 mm diameter | 185 | Joints | - | - |
| 3 | Manufacturing laying and jointing of GI bends of following dia (MC) of required degree conforming to relevant specifictions upto date ammendments having wall thickness mentioned below. The joint shall be jointes circumferencial butt welded joint wah croumferencial butt welded joints by electric arc welding in requisite what of weld rune so as to achive the ma the minimum effective thorat thickness and electrodes of 250 mm to 6.30 mm of Advani Gedikion (Ador) CITOUET / Faab length of weld conforming to 15816100 specification by using welding make conforming to 158141001. af site of work complete in all respects and to the entire satisfication of Engineerin Charge. 80mm dia | 28 | Nos. | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
BOQ_212814.xls
BOQ • 0.23 MB
Form6.pdf
Tender Documents • 0.67 MB
Form8.pdf
Tender Documents • 1.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .