Specification No.33/2020-21

Amount

Dismantling and clearing away from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs

Providing of elastomeric and acrylic coating over the roof top using BASF Masteremaco SBR by which liquid membrane shall consists of a primer coat and two coats of top coats applied through spray, roller or trowel to arrest water leakage including racking out joints , flush pointing with the repair material, cost of all materials, labour,lead, lift etc., complete.

Brick Work in Cement mortar 1:5 using Chamber Burnt Bricks of size 9" x 4.5" x 3" including cost of all materials,labour lead ,lift etc complete.

Plastering the walls with CM 1:5, 12mm thick including cost of al materials,labour.lead.lift etc complete.

Flooring with good quality ceramic tiles/Non slippery tiles of size 305 mmx 305 mmx 6mm laid over 20mm thick CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,

Dadooing walls with glazed tiles of size 300 x 200 x 6 mm laid in cement mortar 1 : 2 , 10 mm thick and pointing with white cement using 0.4 Kg / m2 including finishing the joint and pointing flush with tiles surface etc., complete.

Painting the inside walls with two coats of best quality Acrylic Distemper of approved colour over a interior primer coat of all materials, etc., complete.

Providing PVC door of suitable size as instructed by the Engineer at site including cost of all materials, labour, hinges and other furniture fittings , lead, lift etc., complete.

Supplying and fixing of powder coated roofing sheet over steel section, rectangular tubes, angles, plates, flats, etc., including cost of all materilas, labour, etc., complete as directed by the field engineer.

Supplying and fixing in postion of Indian Water Closet (Oriya Type) of approved quality, colour with10 litre capacity PVC low level flushing tank with all internal fittings (wall mounting type) including all accessories, cost of all materails, labour, lead, lift etc., complete.

Supplying and fixing Colour lipped Mouth Porcelin flat back urinals with all accessories such as 32mm dia Bell mouth PVC connection,15mm dia G.M. wheel valve,15mm dia 'B' Class G.I.waste water pipe,15mm dia nylon connection,15mm dia brass nipple etc.,as directed by the Enginner in charge including cost of all materials,labour,lead,lift,etc., complete.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as brackets , waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixing of stainless steel sink having a size 600mm x 450mm x 200mm with all accessories such as brackets , waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.

Supply and fixing of Anodised Aluminium Towel Rail 60cm long and 20mm dia with Brackets including cost of all materials, labour lead, lift, etc., complete.

Supply and fixing of PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing size of 600mm x 450mm including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixining of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia including cost of all materials lead, lift, labour etc., complete

Supplying, fixing and laying of UPVC pipe ( schedule40) for water supply arrangement including cost of all materials, labour, lead, lift etc complete.

50 mm dia

40 mm dia

25 mm dia

20 mm dia

Supplying and fixing in position of CP Wall Mixture Tap 3 in 1 system with Hand Showers of best quality including cost of materials , lead, lift, labour, etc.,complete as directed by department Engineer at site.

Supplying and fixing 100 x 75 mmCast Iron Nahini / Floor Trap with Stainless Steel Grating in bath room with one pVC door bend shoe of 50 mm dia including cost of all etc.,complete

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Supply and fixing of Medium Density Fibre (MDF) Board 12mm thick Exterior Grade with both sides Melamine finish in cupboards properly as directed by the field engineer at site including all labour, lead, lift, etc., complete.

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 A F.T.switch with continuous earth wire connection of 14 SWG TC wire for open PVC light point/Fan Point.

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 1200mm (48”) sweep AC celling fan (High Speed) of Crompton make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x100mm x113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point

Supply and fixing of 30W LED street light fitting with LED ( Higher End Philips / Havells / Equivalent ) with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads with MS clarnps and aluminium painting.