Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 103 SAI GOVIND BHUVAN 400067 | MUMBAI | MUMBAI | MAHARASHTRA | 400067 | Admitted-Finance |
| 3 | Admitted-Finance 001 BHOOMI COLOSSA PLOT NO 04 SECTOR 19 AIROLI NEW MUMBAI 400 708 | NEW MUMBAI | THANE | MAHARASHTRA | 400708 | Admitted-Finance |
Tender Value
₹52.3 L
EMD Value
₹1.0 L
Closing Date
5 Feb 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM (Technical)
V floor, HWB, VS bhavan
Improvement work for entrance hall of Heavy Water Board at 5th Floor, South wing of Vikram Sarabhai Bhavan, Anushaktinagar, Mumbai
2024_HWB_789263_1
HWB/CIVIL/CO/2024/01
Open Tender
Civil Works
Item Rate
180 days
HWB, VS bhavan
As per NIT
6 documents required · 6 mandatory
₹0
₹1.0 L
23 Feb 2024
8 Jan 2024
12 Feb 2024
8 Jan 2024
5 Feb 2024
8 Jan 2024
8 Jan 2024 - 31 Jan 2024
Amount
Civil works
Wall demolition: Breaking of existing 6"-9" brick wall with plaster & tiles (if any) as per demolition layout as per approved drawing/as directed by Engineer In Charge, removing door / windows, stacking of all serviceable material and handing over the same to departmental stores, disposal of debris to designatd place at VS bhavan for onward transportation etc. complete with all leads and lifts and as directed by the Engineer In Charge.
Old Floor Removal: Removal of all kinds of PVC/existing vinyl flooring as per layout, inclusive of skirting, cleaning the surface and preparing for receiving the next floor, including disposal of debris to designated place at VS bhavan for onward transportation etc. complete with all leads and lifts and as per direction of Engineer-In-Charge.
False Ceiling Demolition: Removal of of existing false ceiling, Including careful removal of Electrical & service wires, handing over the same to departmental stores, disposal of debris to designatd place at VS bhavan for onward transportation etc. complete with all leads and lifts and as per direction of Engineer-In-Charge.
Rubble Collection & Disposal : Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground etc. complete outside BARC colony as approbed by EIC, with all leads and lifts and as directed by the Engineer In Charge.
Brick work
New Brick Wall: Providing and constructing 115mm thick brick wall in partitions using common burnt clay bricks, with 1:4 cement mortar, providing RCC (1:2:4) stiffeners 105x75mm size at every 900mm with Two nos 8 mm dia steel and 8mm dia stirrups @ 300mm C/C, in the RCC band and including scaffolding, form work, racking of joints, curing, labour, materials, transport etc. all complete as per specifications and as direcetd by the Engneer In Charge.
Extra brick work for making column: Providing and constructing brickwork for making columns faces using using common burnt clay bricks, with 1:4 cement mortar, including scaffolding, racking of joints, curing, labour, materials, transport etc. including preparation of old surface, providing wall conector ties of desired shape and spacing in the existing adjoining wall etc. all complete as per specifications and as directed by the Engneer In Charge.
Wall plaster :- Providing and applying 15 mm thick internal wall plaster with 1:4 cement sand mortar, including necessary scaffolding, curing etc. complete as per specifications and as direcetd by the Engineer In Charge.
Entrance
18mm thick Granite stone slab
Wall Cladding with Granite (below sill level): Providing and fixing 18mm thick Granite stone slab Granite of any colour and shade, gang saw cut, mirror polished, premoulded and prepolished, machine cut for facias, wall cladding and similar locations of required size, approved shade, colour and texture laid over 12 mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints reated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
Window & Door Openings - Granite Frame ( Main entrance) Providing and fixing 18mm thk. and 12" wide steel grey granite for door/windows frame, including cutting to size, moulding, polishing edge and face etc. fixing with araldite and cement, filling the joints with pigment mixed with cement, etc. complete and as directed by Engineer-In-Charge. Note: Measurement is for the face area of the stone actually laid in place.
Wall cladding with Thermo-ash wood & base frame : Providing and fixing in position the wall cladding of Thermo-ash wood of ARMSTRONG, VITO, NOVAWOOD, ARMSTRONG, EVOLEN, BARBOSA, CASTROWOOD or equivalant make approved by EIC, of width 90 -120 and thickness 21+1 mm , the thermo ash wood shall have one groove on one side horizontally on surface when fixed and plain on other side. The Cladding shall be fixed on Aluminium sections of 50 mm X 25 mm weighing not less than 0.75kg/metre filled with softwood stuffing , the aluminium section shall be fixed at a equal distance of 600mm with additional supports at supports at joints and near edge members as re quired and as direcetd by the engineer, should be firmly fixed on the wall with screws. The wood shall be fixed in such a way that no screw is visible when seen from outside. The cost of work shall be inclusive of all materials, labour, accessories and polishing etc. all complete as per direction of the Engineer in charge including making necessary arrangement for continuing the wall panel and pattern over the service shaft doors falling within the wall cladding, fixing with screws/nutbolts etc. ensuring smooth operation of the service shaft dooor after completion work etc. and including providing necessary new hardware to the door of approved quality, make and design to match the decor etc. complete.
Filling the gap upto 5mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over Closed cell backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
Entrance Glass Door & Fixed glass panels : Providing and fixing Twin shutter frameless glass door and fixed panels using 12mm thk. toughened glass using Saint Gobain/Modiguard - Extra Clear toughened glass with polished edges to be fixed with necessary S.S Brush finish brackets & support, Patch Fittings, Pivots and SS hardware of approved quality and make (Kich, Dorset, Ozone, Godrej , Enox or equivalant approved by EIC), including 32mm dia 900 mm long 'H' handles ( SS brush finished) both sides,for each shutter, door lock, 100 Kg double action floor springs etc. for each shutter and including providing and fixing perimeter profile, pvc buffer, stopper, making necessary holes for fixing required door fittings, including carefully removing the existing glass doors and handing over the same to departmental stores etc. complete as per design, drawing, make and samples approved by the Engineer in charge. Notes : 1) All edges of glass shall have Diamond cut polished edges. 2) Toughening process shall be from glass manufacturer approved processors.
Fase ceiling Lobby Area
Grid work Hanging grid in entrance lobby Area : Providing and fixing polyster powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of Box/Tee/Angle sections of approved Jindal/Hindalco/Indal make or equivalant appved by EIC, conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and all complete as per approved architectural drawings and direction of the Engineer-incharge.
Hangers : Providing and fixing 6 mm dia. G.I. level adjusting hangers (max upto 750mm length), for aluminium false ceiling grid, fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
Mesh : Providing and fixing Polyester powder coated hexagonal aluminium wire mesh of approved design/ pattern of make Indo German, Jindal, Hindalco, Indal or equivalant approved by EIC, (minimum thickness of powder coating 50 micron), with approved standard section and fixed to the frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the mesh to proper size for fixing and fixing approved anodised aluminium standard section around the edges etc all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment under this item) Note : Polyester powder coating shall be of Nerolac, Berger, J&N.
Potted Planters: Supplying and placing in position potted planters of size (2'-6" x 1'-6") with good quality artificial flowers, as Per approved pattern, design, style and make approved by EIC.
Hanging Planters: Supplying and placing in position hanging planters of size (2'-0" x 2'-0") with good quality artificial flowers as Per approved pattern, design, style and make approved by EIC.
False ceiling other areas
False Ceiling with Gypsum board including grid (common areas) : Providing and fixing false ceiling 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 with BIS certification marks of make Saint Gobain or equivalant approved by EIC, including providing and fixing of frame work made of special sections, power pressed M.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 of make Gypsteel ceiling framing system of Gyproc or equivalant approved by EIC, in line and level, consisting of ceiling section, perimeter channel, intermediate channel etc; angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction,including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, complete, with an over all grid spacing of 450x450 mm and fixing as per manufacturers recommendations including all accessories, expansion bolts, ceiling cleats and other fasteners, fixtures and fittings complete. Entire work shall be done as per standard specifications of Saint Gobin Gyproc India, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, epoxy and acrylic based jointing compound for seamless finish, painting with two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge. Note : Only finished visible surface area shall be measured for payment.
False Ceiling - Floating Panels (in passage and in viewers gallery ceiling highlighter strips) : Providing and fixing 12mm thick One side lamination HDF/HDHMR (of make Action Tesa or equivalant approved by EIC) base panel and finishing other face with approved 1.25mm thk. External decorative laminate of Royale Touch or equivalant approved by EIC, etc complete as per approved drawings/design, fixing of Aluminium back strip and hangers as required as direcetd by EIC. (Hangers and aluminum back strip to be paid separately)
Flooring - All areas
Flooring Installation: SPC Providing installing 5 mm thick SPC (Stone plastic composite) SPC Plank click & Lock flooring of approved make design/pattern of Wellspun (Eden category) or equivalant make approved by EIC and installed by company authorised installers including providing and laying 2mm biofoam sound buffer layer below the SPC flooring, including preparation of subfloor, levelling of small undulations with SBR polymer modified cement based screed/plaster of paris as may be required and as direcetd by EIC, filling of depressions in floor after dismantling of walls with 50-75mm thk. concrete screed (1 part cement :2 parts sand:4 parts zero size aggregate), finally cleaning the floor after layng with mineral spirit/stain remover etc complete as per manufacturers specifications, Inclusive of all materials and labour costs etc. complete and as directed by the Engineer.
Visitor Room
Glass Partition - Visitor's Lounge : 12mm thick frameless toughened glass partition using Saint Gobain - Extra Clear toughened glass with polished edges, inclusive of 12mm thick frameless toughened glass door to be fixed with necessary S.S Brush finish brackets & support, Patch Fittings, Pivots and SS hardware of approved quality and make (Kich, Dorset, Ozone, Godrej , Enox or equivalant approved by EIC), 32mm dia 600 mm long 'H' handles both sides, door lock, 100 Kg double action floor spring etc. and including providing and fixing including perimeter profile, pvc buffer, stopper, making necessary holes for fixing required door fittings, etc. complete as per design, drawing, make and sample approved by the Engineer in charge. Notes : 1) All edges of glass shall have Diamond cut polished edges as directed by EIC. 2) Toughening process shall be from glass manufacturer approved processors.
Supplying and fixing in position Roller blinds for windows (Vista/Mac/Armstrong/DECK or equivalent) made with fabric of approved quality, design, make and shade comprising of polymer coated fiber fabric approved by the EIC. The roller mechanism shall be a molded unit made from engineering grade plastic polymer with steel spring support. The fabric shall be finished on the sides with edge tape duly welded for waviness control. The fabric shall be attached to the roller tube with high quality selfadhesive tape, with smooth manual operation, with all fittings complete as per manufacturer's specifications. Rate should including removing existing vertical blinds and disposing the material as directed by EIC etc. all complete as per specifications and as directed by EIC.
Film on Windows and Glass partitions:
Providing and fixing of glass film of approved quality, make and brand including preparation of surface and fixing as per manufacturers specifications. and directed by EIC with all labour, materials, transport etc. all to the satisfaction of the EIC .
3M Frosted film and strips.
Custom design on premium quality Designer graphic glass decorative film of 3M TM FASARATM TM & Architectural film of 3M. Rate shall include necessary etching of LOGO and other graphics, cutting/printing of custom design etc complete.
Providing and fixing 3.5 mm thick UV PVC Marble sheet with UV coating, of approved make, design/pattern and shade approved by EIC for covering windows stone sills top and edges (approx. 300mm wide and 20mm thick) and wrapping of wooden members in windows frames (50mm depth and 50 mm width approx.) alround the window frame over a base of 6mm thick cement fiber board of approved make, by using PU based or other compatable adhesives recommended by manufacturer, including prepartion of suface, finishing the joints smooth, exposed edges sealed with colour-matched silicone sealant, finishing the surface unifirm to line, level and plumub etc. complete, in a workman like manner to the satisfaction of Engineer incharge etc. complete with all materials, labour etc. complete. Note: Surface area of UV PVC marble only measured for payment.
Over existing Stone window sills top and edges -Direct application.
Alround window frame - 3mm UV PVC Marble sheet over a base of 6mm thich cement fiber board.
Security Area.
Security Desk : 36" deep understructure carcass (with approved finish), as per drawing with all types of screws, fasteners, hardware as approved by Engineer as per design, site condition including carefully removing existing security desk, security change room partion and handing over the same to Departmental stores etc. complete and as directed by the Engineer-In-Charge. Approximate Dimension : Three segments each of size (L X W X H): 2100 X 900 X 740 or as per site condition, provided with 18mm adjustable buffer. Table top and Legs : Made of HDF/HDHMR fiber boards 50mm overall thickness, with 1.25mm thick decorative laminate finish on outer face and 0.8mm thick laminate on internal side with 50 x 50mm Powder coated MS / Solid Wood tie member below the table top; all exposed edges sealed with E3 PVC edge band 2.00 mm thick of approved brand and matching shade. Glass Ledge : 300 mm wide, 12mm thick Toughened glass with dimond cut polished edges, mounted on Six nos, 300 mm high SS mounts of 25mm dia as per drawing. Front Panel: 200mm wide structural Spine Box for wiring and switch board made with 18mm thick HDF/HDHMR with metal cable manager as per drawing, finished with 1.25 mm thick decorative laminate finish on extrernal face and 0.8 laminate finish on interal face. Drawer Unit : 2 units of 3 drawer set pedestal with casters for each table of overall external dimensions 450 (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of 18mm thcik HDF/HDHMR fiber board and provided. finished with 3 mm thick Teak veneer with PU Coating on shutters and 1mm thick decorative laminate on balance exernal surfaces and 0.8mm thick laminate on internal surfaces with all SS hardware & accessories, magnetic catchers, door handles/ knobs etc. Hardware : Drawer unit shutter shall be provided with Hinge-damping mechanism to enable soft closing of doors. Drawers shall be provided with Heavy duty telescopic full extension sliding channel, handles, suitable locking arrangement approvd by EIC. 4) Material - (a) All HDF/HDHMR boards shall be of make Action Tessa or equiavalant approved by EIC. b) Veneer shall be of make Timex or eqivalant approved by EIC and finished with Three coats of malamine polish. c) Laminate shall of Matt finish of make Royale Touche or equivalant approved by EIC. d) All hardware of approved quality of make Yale, ebco, hettich, godrej or equivalant as approved by Engineer. 5) All exposed edges shall have smooth edges & corners. 6) All the surface without teak veneer / laminate / balancing laminate shall be lacquered polished of approved shade. 7) Only plan area of finished product will be measured for payment.
Providing and Laying 8 mm thick toughened glass of make saitgobian or equivalent approved by EIC, with Mounding edges. All edges of glass shall have Diamond cut polished etc. complete as per the architectural drawings and the directions of engineer-in-charge.
Supplying and installation of 2.3 mm embossed HDF sheet (design shall be approved by engineer in charge) on 12 mm thick one side lamination (OSL) HDF/HDHMR board of make Action Tesa or equivalent approved by EIC, using adhesives of approved make and quality, including necessary screws/nails, polishing of embossed HDF/HDHMR surface with three coats of Matt malamine polish, including sealing the edges of the board with filling compound and applying two coats of primer on the edges and providing and fixing Designer boarder moulding made of pre-polished teak wood of size 25mmx12mm (design approved by EIC) alround the board etc.complete as per direction of Engineer -in -charge. Cost shall be inclusive of all materials, labour, manufacturing, printing, transportation and installation at site etc. all complete.
PROVIDING AND FIXING WICKET GATE of size 1.05 - 1.1 Mtr x 0.80-0.85 mtr as per design approved drawings, WITH BOTH SIDE LAMINATE - 30 / 32 mm thick flush shutter with both side laminate 1.25mm thick Royale Touch decorative laminate or equivalant approved by EIC, providing polished lipping with 2nd class teak wood battens 25 mm minimum depth on all edges, providing necessary hinge side supporting arrangement with Teak wood batten, polishing and finishing to the satisfaction of the EIC, incuding SS hinges with countersunk SS screws, S.S Handles, SS aldrop etc complete as directed by the engineer.
Providing & fixing 12mm soft board of size 3'x4' for pin up over a base of 5.5 mm thick HDF/HDHMR one side lamination (OSL) board of Action Tesa or equivalant approved by EIC, with 1st class Teak wood frame of size 1" x 1/2", soft board covered with plain fabric of approved quality, design (Min. Base rate of cloth Rs. 250 per Rmt. ), including Poishing teak wood frame with three coats of lacquer/ Malamine/PU polish etc. complete and as directed by EIC.
Fish Tank
Fishtank - Sectional Base and frame : Metal flanged Beams as understructure and frame for Fish Tank (standard)as per drawing in Steel work welded in single or built up sections, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
Providing and fixing concealed plumbing with 20mm dia heavy duty CPVC pipes including all CPVC plain & brass threaded fittings like control vales, stop cock etc., jointing the pipes with solvent cement, including making grooves in the walls, floors for concealing the pipes and making good the same, matching with the surroundings, including testing, finishing etc. complete.
Fish Tank/Aquarium: Providing, fabricating and installing in position custom built Fresh water fish aquariums / tank of size 10'x2'x4' (approximate water volume 2150 Liters) as detailed below: (i) Aquarium : 10 feet long, 2 Feet wide and 4 feet Hight tank made out of 19mm thick high-quality low-iron, tempered, ultra-transparent glass (extra clear glass), CNC machine cut, computerised polished, toughened glass of Saintgobian or equivalant make approved by EIC with support glass (additional braces) to ensure safety of the tank and with an extra safety metal frame for tank rim (at top) using powder coated Aluminium channel of size 60x60x6mm with necessary rubber cushion (ii) Metal Stand : Base frame of over all size 10'x2'x3' made out of 75x75x5mm powder coated MS angle/ C channel to carry the weight of the acquarium safely, as per approved drawing. Drawing to be submitted by the Agency for prior approval of EIC, before taking up fabrication. (iii) Cabinet - 10'x2'x3' cabinet Made out of 19mm thick Marine grade ply (confirming to IS 710) of Century or equavalant approved by EIC, with decorative laminate on front side and balancng lamination on the other side, frame and shutters with all fixtures and fittings, Heavy duty SS hinges of Godrej make or equivalant approved by EIC etc. complete as per approved drawings. Drawing to be submitted by the agency and got approved before taking up execution of work. (iv) Bed Ply & Support Pad: 19mm thick Marine grade ply (confirming to IS 710) of Century or equavalant make approved by EIC, with 12 mm thick rubber matt at tank base for placing the tank (v)/Back panel - Back painted/ Back laminate - with Vinyl paper plus stickering of approved quality, design and shade approved by EIC (vi) Filtration and disinfection system: Undergravel filter media of 2" thick layer with 2mm size aquarium grade gravels/sand of approved quality, power pumps, external canister filter with media, top filter, submersible aquatic pump, Air blower etc. with all fittings, UV steriliser and clarifier 36W, submersible return pump (silent pump) with controller. (vii) Plumbing : plumbing/fitting connections on tank end, Inflow pipe, outflow pipes, control valves etc. with necessary fixtures and fittings, making leaktight connections to the tank etc. complete. (viii) Aquascape : Proding acquscape with aquarium grade gravels, decorative rocks, driftwood, plants (Minimum 10 Nos assorted sinking plants of size 7" to 24") & fishes with wooden stems etc. as direcetd by EIC. (ix) Lights : customised light panels 4 Ft panels, LED lights, Automatic Timer for Lights etc. (x) Accessories: All accessories including magnetic alge scrapper pad, Automatic Fish Feeder, live bacteria and water supplements, digital water heater, thermo meter, oxygen cylinder, Air pump, Airline, bubble wand, eletctrical light source, silicon etc. including all materials, labour, equipment, fabrication, packaging, loading & unloading, transportation, insurance, site installation etc. complete and as directed by EIC.
Supplying Fish of fresh water variety of kind, size, age etc. as directed & approved by EIC. "Lot" is defined under item no. 39.1 of technical specifications.
Maintenance charges for Aquarium: Periodical Maintenance of Aquarium including cleaning and sanitization of fish tank, cleaning of media, servicing of filtration system, chaninging of Internal Filter with suitable new filter of approved quality & design whenever required, servicing and or replacing all machinery to keep the system up and runnung without any break, replacement of dead fish with similar or equivalant variety as approved by EIC, supplying Premium quality Fish Food of (of approved brand, source and make) throughout the year, providing Aqua Coat to remove Chlorine & Chloramines from the water, to maintain the water pH (and to help in developping slime coat on fishes), supplying and feeding nitrifying Bacteria and water suppliments (to help in degrade the organic waste and removal of odour and clear cloudy water), maintaining fish population and replenishing Fishes by replacing the dead fish with new ones, providing Medication to the fish whenever required to keep the fish healthy throughout the year including change the interior of the aquarium (landscape) after every 6 months to maintain a fresk look of the aquarium by changing Gravels, Rocks, Decorative items, Plants, Driftwood & Fishes, replacement of few or all the fishes with new varieties etc. complete as per specifications and as direcedt by the Engineer. Note : 1) Frequency of service - Services shall be rendered throughout the contract period at the frequency as per the activities isted in BOQ above. Unlisted activities as may be required to mainintain the Acquarium functional shall be rendered without any extra cost. Site visit - Once in 15 days or on need base/call based as may be required in case of any breakdown of machinery, filtration system etc. without any additional cost. 2) Mode of Payment - Payment is on Monthly basis subject to satisfactory maintenance as above and as direcetd by the Engineer.
Cupboards/Storage Units.
Renovation of Service Storage Units: 24" deep carcass - 1.30 Mtr width (with 4 panel Glass shutter) : Renovating the existing storage units by providing internal lining with laminated Fiber board, toughened glass shutters and toughened glass shelves etc. as per approved sample, indicative sketch /drawing and as detailed below. Shutters: 8 mm thick frameless toughened glass door shutter of saintgobian (or equivalant approved by EIC) in four panels as per drawing including providing and fixing top & bottom pivot type fixing arrangement with necessary supporting arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge. Glass shelves: 12mm thick toughened glass shutter of saintgobian (or equivalant approved by EIC), including fixing arrangement with SS glass holders etc. all complete as per direction of Engineer-in-charge Back panel : 8mm thick one side lamination HDF/HDHMR back panel, other side finihshed 1mm thick approved decorative lamination Sides, Top and Bottom: 8mm thick one side lamination HDF/HDHMR panel, other side finihshed 1mm thick decorative lamination of approved make, design and shade Edgebanding : 2mm thick E3 make PVC edge banding of matching shade. Hardware : All SS hardware & accessories, Pivots, Handles, locks, knobs, clips etc , SHOWER HINGES(SS 304) - CSFS-02 of CNR Architecture or equivalant approved by EIC, handles & lock etc. of approved make and quality. Note : 1) Material - HDF/HDHMR boards shall be of make Action Tessa or equiavalant approved by EIC . 2) Laminate shall be of Matt finish of make Royal Touch or equivalant apprived by EIC 3) Hardware " All SS hardware of godrej, Yale, ebco, hettich or equivalant make approved by EIC, 4) Glass Toughening process shall be from approved processors. All edges of glass shall have Diamond cut polished. 5) Front elevation area only shall be measured in Sqm for payment. Rate shall include all materials, hardware, labour, transport etc. for completing the woirk as per approved sample/design, including removing exsting shutters, shelves, lining material if any, disoposing the waste materials etc. complete as per specifications and as directed by Engineer-In-Charge.
Renovation of existing Service Storage Units: 24" deep carcass - 0.85 Mtr width (with 4 panel Glassshutter) : Renovating the existing storage units by providing internal lining with laminated Fiber board, toughened glass shutters and toughened glass shelves etc. as per approved sample, indicative sketch /drawing and as detailed below. Shutters: 8 mm thick frameless toughened glass door shutter of saintgobian (or equivalant approved by EIC) in four panels as per drawing including providing and fixing top & bottom pivot type fixing arrangement with necessary supporting arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge. Glass shelves: 4 Nos 12mm thick toughened glass shutter of saintgobian (or equivalant approved by EIC), including fixing arrangement with SS glass holders etc. all complete as per direction of Engineer-in-charge Back panel : 8mm thick one side lamination HDF/HDHMR back panel, other side finihshed 1mm thick approved decorativelamination Sides, Top and Bottom: 8mm thick one side lamination HDF/HDHMR panel other side finihshed 1mm thick decorative lamination of approved make, design and shade Edgebanding : 2mm thick E3 make PVC edge banding of matching shade. Hardware : All SS hardware & accessories, Pivots, Handles, locks, knobs, clips etc , soft close hinges, handles & lock, stopper, ornamental rails/bars as indicated in indcative sketch etc. of approved make and quality. Note : 1) Material - HDF/HDHMR boards shall be of make Action Tessa or equiavalant approved by EIC . 2) Laminate shall be of Matt finish of make Royal Touch or equivalant apprived by EIC 3) Hardware " All SS hardware of godrej, Yale, ebco, hettich or equivalant make approved by EIC, 4) Glass Toughening process shall be from approved processors. All edges of glass shall have Diamond cut polished. 5) Front Elevation area only shall be measured in Sqm for payment. Rate shall include all materials, hardware, labour, transport etc. for completing the woirk as per approved sample/design, including removing exsting shutters, shelves, lining material if any, disoposing the waste materials etc. complete as per specifications and as directed by Engineer-In-Charge.
Provind and fixing 6mm thick Cement fiber sheet on the Metal door of Electrical shaft and finished with 1mm thick lamination over the cement fiber board using PU based or any compatable adhesive suitable for the kind of surface, including providing and fixing 2mm thick E PVC edge banding of approved make and shade, heavy duty SS aldrop, handles and lock of approved brand, design, make and quality etc. complete as direcetd by and to the satisfaction of Engineer in Charge.
Electrical Storage unit/ DB mounting unit: Providing cabinet of approximate size 2.3mx1.4mx0.4m, made up of cement fiber board confirming to IS 14862 or cement bonded particle board conforming to IS 14276 as per approved drawing and as detailed below: Back & Side panel - 40mm thick plain cement boards fixing using necessary screws, clamps etc. Board front side visible edge shall be provided with powder coated aluminium U channel lipping suitable for 40mm board, fixed with silicon sealant. Shutters - Four shutters configuration as per drawings. Shutters made out of 12 mm thick prelaminated cement board (both side laminated) with powder coated aluminium U channel lipping of approved size and thickness suitable for 12mm board, alround, fixed with silicon sealant. Shelve: 20mm thick plain cement board. Accessories: Heavy duty SS Hinges of approved design & Make of Godrej or equivalant approved by EIC - 8 Nos (4x2), concealed or approved type SS door handles one for each shutter, suitable lock of godrej, with all acessories of approved design and make approved by EIC Ventilation: S.S Perforated jali/SS louvers of size 400mmx200mmx1.5mm one for each shutter, fixed with Aluminium beading/glazing clamps Painting: Cement boards shall be painted with one coat of primer on all surfaces and overcoating with three coats of acrylic emulsion paint (excluding prelaminated shutters) MS frame work: Mid Shelf supported by MS angle ISA 45X45X4 on three sides, necessary frame work for supporting/fixing Electric DBs in the cabinet as direcetd by EIC (MS frame work to be paid separately under relevant item) all as per drawings, with all fixtures and fittings, materials, labour, transport complete. as per specifications and as directed by EIC Note: Face area only shall be measured for payment. Rate shall be all clusive price per unit area for all the jobs as per BOQ.
Panelling for column/Beam.
Panelling for Columns with base of 12mm thick HDF/HDHMR one side lamination (OSL) fiber board of make Action Tesa or equivalant approved by EIC and other side finished with 3mm thk. veneer of make Timex or equivalant approved by EIC. Veneer finished with Three coats of malamine/ PU polish, including providing and fixing 0.10mm thick polythene sheet as moisture barrier as approved by Engineer in charge.
False Beam Panelling:- 6" deep carcass - custom design with 8mm thk. one side lamination HDF/HDHMR fiber board (of make Action Tesa or equivalant approved bt EIC) and other side (facia) finished with 1mm thick decorative laminate of Royael Touche or equivalant approved by EIC with 2mm thick E PVC edge banding of matching shade whereever required etc complete including providing 6"-12" deep, full width supports at 18" C/C, supports made out of 18mm thick HDF/HDHMR Both side laminated (BSL) fiber board (of Action Tesa or equivalant approved by EIC), fixed on three sides of the beam for boxing and including providing flush service door made out of 18mm thk. HDF/HDHMR shutter with 1mm thick decorative laminate of Royale Touche or equivalant apoproved by EIC, proving and fixing hydraulic gas pump fitting for the shutter with standard make hardware etc. complete and as directed by EIC.
Fish Tank Front Paneling - Base & Top : 12mm thk. Marine grade ply base (marine plywood conforming to IS: 710) as per design. Inclusive of 18mm thk. flush service door with Marine ply base, all exposed surfaces finished with 3mm thk. veneer of approved make and quality ad interal faces finished with 0.8mm thick laminate with necessary hardware etc. complete. Note : Veneer of make Timex and laminate of make Royale touch or equiavalant approved by EIC.
Painting & Punning
Painting - Ceiling/False ceing : Painting with two coats of premium interior emilsion paint (Royale paint of Aian Paint or equivalent approved by EIC ) over two coats of compatable primer as per manufacturer's recommendation (Royale base coat or equivalent approved by EIC) using expert labour including preparation of surface even and smooth, cleaning, etc. complete as per specfications and as directed by the Engineer.
Painting with wall putty - Walls & Beams : Painting with two coats of premium interior emilsion paint (Royale paint of Aian Paint or equivalent approved by EIC ) over two coats of compatable primer as per manufacturer's recommendation (Royale wall base coat or equivalent brand and make approved by EIC) using expert labour including Surface preparation, cleaning, appying Acrylic Wall Putty wall putty of average 1mm thickness using Asian Paints TruCare Acrylic Wall Putty or equivalant approved by the EIC over the entire wall surface to prepare the surface even and smooth etc. complete as per specfications and as directed by the Engineer.
Miscellaneous
Nameboard - Entrance : Fabrication and fixing in position Unit Logo comprsing of Government of India Emblem & Heavy water Board , Unit Description in 3 Languages (English, Hindi & Marathi) with 10mm Acrylic letters back lit, Custom Make, as approved by EIC.
Lettering, logo & photo on Fish Tank Caption Board Providing and fixing Unit Logo, Homi Bhabha Photo & Quote (Approx. 23 words or more as directed by EIC) with 10mm Acrylic letters w. Backlit, Custom Make as approved by EIC. of size 10' 9 long and 2"height above fish tank and 10' 9 long and 3"height below fish tank.
Custom Board (Welcome to HWB): Providing and fixing 50mm thk. custom design, White Acrylic Letters with backlit as directed by the Engineer In Charge.
HWB Plant - Potraits: HD quality Photo of HWB Plants (3'-0" x 5'-0") with lamination and frame using high quality photo paper and printing ink as approved by EIC.
HWB leaders - Photo Frames: HD quality Photo of Imminent Leaders as direcetd by EIC, of size (1'-6" x 2'-6")- with lamination and frame using high quality photo paper and printing ink as approved by EIC.
Polishing of aluminium windows using approved non solvent aluminium cleaner and restorer/polisher approved by EIC, including scrubing, cleaning the old aluminium windows with polishing paper of 4000 or higher grit number for cleaning/polishing and applying a two coats of protective coating with epoxy clear coat /aluminium resin/Car wax, etc. complete as per specifications and as direcetd by EIC.
Electrical & Management system.
Electrical Points: All wiring points - Ceiling & Wall. 3-core cables with PVC Conduits, 4 & 2 way junctions for 1.5mm2 light and switch points as per approved drawing & as directed by EIC.
Electrical Management System - Flooring: All wiring points - 3-core cables on aluminium raceways , 4 & 2 way junction boxes for all type wiring as per approved drawing & as directed by EIC.
Cable Management System: All wiring points - 3-core cables on perforated type trays and ladders, for all type wiring as per approved drawing & as directed by EIC.
Distribution Board: Supply, Installation, Testing & Commissioning of Distribution Boards for the lobby with MCBs / ELCBs and interconnections. 12 Way TPN DB- UPS DB as directed by EIC.
HDMI Cable: 15m HDMI Cable 340 MHz high speed (Main and Reserve) for Digital Wall & Security Wall as directed by EIC.
DATA Cable: 30m CAT7 UTP Cable upto 1GBps speed (Main and Reserve) for Data networking - Digital Wall, Security Wall, CCTVs & Security Desk as directed by EIC.
Earthing: 25mm x 6mm x 350mm Long Copper Bus (For Server Earth) with Earth Box as per approved drawing & as directed by EIC.
5 Amp Points: All wiring points - Ceiling & Wall. 3-core cables w. PVC Conduits & 4 & 2 way junctions for 2.5mm2 socket points as per approved drawing & as directed by EIC.
15 Amp Points: All wiring points - Ceiling & Wall. 3-core cables w. PVC Conduits & 4 & 2 way junctions for 4.0mm2 socket points as per approved drawing & as directed by EIC.
32 Amp Point - AC: All wiring points - Ceiling & Wall. 3-core cables w. PVC Conduits & 4 & 2 way junctions for 4.0mm2 socket points. AC Copper piping separately insulated and CPVC water piping.
Fans: Recessed fans Standard Make - High Speed Anti-Dust Energy Efficient Smart Fan.
Switch & Sockets: Switches and Sockets, with Switchboard. Inclusive of PVC concealed box. Coloured Switch & Acrylic / Glass Switchplate, Standard Make.
Light Fittings: 36W Tubelight (x 4 Nos.)-Aluminium Body, Standard Make as directed by EIC.
Light Fittings: 15W LED Panel Lights (x 16 Nos.)-Aluminium Body, Standard Make as directed by EIC.
Light Fittings: 9W COB Panel Lights ( x 8 Nos.)-Aluminium Body, Standard Make as directed by EIC.
Light Fittings: 2m track with 4 Spot Lights (x 4 Set)-Aluminium Body, Standard Make.
Light Fittings: 180 bulb/m LED Strip Mounted Caselight (x 16 Nos.) -Aluminium Body, Standard Make.
AC - 1.5 Ton 3 star Split Split AC with Indoor and outdoor unit of Voltas, Daikin, Blustar or equivalent make approved by EIC.
Shifting of Elctrical DBS. Shifting of following Distribution boards : 1) readymade,IP43, 4 way VTPN MCB DB with 100A 4P Isolator - 1 no., 16/25/32A,3P,10kA,C-curve,MCB - 4 each, Wire way box earthing and neutral links etc.---1 set (I/c cable 4C x 25 sq.mm Cu conductor PVC Arm cable O/g 4Cx6 sq.mm Cu conductor PVC Arm cable - 1 no.) 2) Readymade IP43, 4 way VTPN MCCB DB, 125A 4P Isolator(MCCB type) - 1 no., 40/50/63A,3P,10kA,C-curve,MCB - 4 each, Wire way box, earthing and neutral links etc. (I/c cable 3 1/2 C x 35 sq.mm Cu conductor PVC Arm cable O/g 4Cx16 sq.mm Cu conductor PVC Arm cable - 1 no.) 3) IP43, 12ways,PPI,ETPN MCB DB, 32A,10kA,C-Curve,4P MCB, 32A RCCB 30mA sensitivity - 3 nos., 6/10/16/25/32A, 10kA,C-Curve, SP, MCB - 30 nos. Wire way box, etc.earthing and neutral links etc.- 4) Readymade IP43, 12ways,ETPN MCB DB, 63A 10kA 30mA 4P RCBO, 16/25A 10kA C-Curve SP MCB - 36 each, Wire way box, earthing and neutral links etc. Scope of work including following : 1) disconnection / dismantling of DB's with incoming cables & outgoing circuits/ cables, reinstallation testing & commissioning of DB's.
Disconnection / dismantling of DB.
Reinstallation testing & commissioning of DB.
Circuit wires.
Supply, installtion,testing and commissioing of 1.5 sq.mm FRLS grade 1.1 kV PVC insulated flexible multi-stranded copper wires including termination of wires with suitable copper lugs at junction boxes/switch boards/MCBs as required in existing conduits/PVC casing & capping and instructed by EIC.
Supply, installation,testing and commissioing of 2 nos. of 2.5 sq.mm and 1no. of 1.5 sq.mm FRLS grade 1.1 kV PVC insulated flexible multi-stranded copper wires including termination of wires with suitable copper lugs at junction boxes/switch boards/MCBs as required in existing conduits/PVC casing & capping and instructed by EIC.
Supply, installation,testing and commissioing of 2 nos. of 4sq.mm and 1no. of 2.5 sq.mm FRLS grade 1.1 kV PVC insulated flexible multi-stranded copper wires including termination of wires with suitable copper lugs at junction boxes/switch boards/MCBs as required in existing conduits/PVC casing & capping and instructed by EIC.
Cabling works Supply, installation, testing & commissioning of 1.1 KV multi stranded copper conductor with XLPE insulation, extruded PVC inner sheathed, G.I strip/wire armoured, extruded FRLS PVC outer sheathed cable conforming to IS 7098 Part-I with latest amendments, fixed on wall/column/ slab/shaft on 5mm thick G.I. flat/angle support fixed with coach screws/grouted in wall/anchor fasteners, 2mm. thick G.I. fabricated saddle, all fixing accessories, etc. providing brass cable number tag as per enclosed detailed specifications & as per instructions of the E-I-C & of the following sizes.
4C x 16 sq.mm Cu conductor cable with GI strip armour on wall/column/slab/ shaft etc.
4C x 6 sq.mm Cu conductor cable with GI wire armour on wall/column/slab/ shaft etc.
4C X 25sq.mm Cu conductor cable with GI strip armour on wall/column/slab/ shaft etc.
3.5C X 35 sq.mm Cu conductor PVCA cable with GI strip armour on wall/column/slab/ shaft etc.
End termination : Providing end termination of following sizes of MV PVC/XLPE insulated armoured cables with solder less heavy duty tinned copper tube terminals(lugs), brass cable gland, insulation tape, duplicate earthing for cable gland with suitable sizes of brass earth tags inter connecting nearest earthing point with 8SWG copper wires etc. as per relevant IS specification and as per instruction of Engineer in-charge.
4C x 16 sq.mm Cu conductor cable.
4C x 6 sq.mm Cu conductor cable.
4C x 25 sq.mm Cu conductor cable.
3.5C X 35 sq.mm Cu conductor cable.
Supply & installation of Android smart TV 85” 4K ultra HD Display Unit of approve make and brand viz.samsung, sony, LG or equivalent, all complete as per technical specifications & as directed by EIC.
Networking components.
Supply of Cat 6A UTP Cable (300 mtrs. Box), confirming to TIA 568.2.D, Class EA - ISO/IEC11801:2002 Type: 23 AWG solid bare copper having schnider, digi link , D link or equivalent all complete as per technical specifications & as directed by EIC.
Supply of Cat 6A Information Outlet and CAT 6A Face Plate of approved make schnider, digi link , D link or equivalent, including all acessories all complete as per technical specifications & as directed by EIC.
Supply of Surface Mount Box for Face Plate, simplex type of approved make schnider, digi link , D link or equivalent all complete as per technical specifications & as directed by EIC.
CCTV related items.
Supply & installation of IR VARI-FOCAL Dome Cameras of 2.4 MP of approved make: Honeywell, CP Plus, Bosch, Godrej or equivalent, all complete as per technical specifications & as directed by EIC.
Supply & installation of Digital Video Recorder (DVR) 8 Channel with control devices- front panel, USB mouse, keyboards etc inclusive of all acessories & of approved make preferrably: Honeywell, CP Plus, Bosch, Godrej, all complete as per technical specifications & as directed by EIC.
Supply of 8 Port Ethernet Switch with 1GbaseT port for Out of Band Management & RJ-45 port for console and of approved make, preferrably : Netgear, D-Link, Digilink all complete as per technical specifications & as directed by EIC.
Supply, installation & commissioning of 5 KVA UPS with all acessories (Rack Mountable) having make APC, delta or equivalent, all complete as per technical specifications & as directed by EIC.
Supply & installation of 9U Wall Mount rack with dimension 750 mm x650x500 (LXWXH) along with all accessories having preferrable make Rittal, Valrack, Godrej, WQ India as per technical specifications.
Supply & installation of accessories like junction box, hard disk, coaxial cable, power cable as per technical specification and as directed by EIC.
Magazine stand : Single width 3 tier clear acrylic magazine stand having 1525mm hieight and base dimension as 440mm (w) x 360mm (d) with shelve size 230mm (w) x 350mm(h) as approved & directed by Engineer-In-Charge.
Bench Seating. Framed understructure with hardwood frame dowel jointed seat base and wood seat base w. melamine polish. 2" PU foam w. faux upholstery seat as directed by Engineer-In-Charge.
Custom Center Table :- Providing and fixing Centre table Size - 1100mm W x 500mm D x 365mm with with top made of 12mm thickk toughened glass of approved make. The understructure shall be made of 304 grade S.S. base of approved section.
Visitor chair : Premium visitor's chair with Hands of Godrej, Dumro or equivalant make as direcetd by Engineer.
Providing and fixing Corner/Side Table of size - 450mm W x 450mm D x 365mm with top made of 12mm thickk toughened glass of approved make. The understructure shall be made of 304 grade S.S. base of approved section.
Carpet at Entrance : Providing and laying PVC lawn-carpet of size 8ftx3ft and 40 to 60 mm thick of approved brand as directed by EIC.
Bombay Construction
P. K. Enterprises
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .