SPECIAL REPAIR TO BUILDING NO. P-1 (TYPE-I QUARTER), BUILDING NO. P-2 (TYPE-I QUARTER), BUILDING NO. P-3 (TYPE-II QUARTER), BUILDING NO. P-4 (TYPE-III QUARTER), BUILDING NO. P-12 (TYPE-IV

Amount

M&L for cleaning the roof surface inc taking out vegitaion, debris and previous treatment on roof completely including removal of screed bed/ concrete bed/ plaster/ mud phuska or any other treatment carried out previously over roof suface and making the mother slab (Roof slab) completey visible prior to carrying out any other treatment complete all as specified and directed.

M&L as in levelling course Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) complete all as specified and as directed by Engr-in-Charge.

M &L for 15mm thick screed bed in CM 1:4 (1 cement : 4 coarse sand) on new/old concrete surface to received APP membrane sheet complete all as specified and as directed.

M&L for providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layered 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete and applying two coats of aluminium paint. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane

M&L for dismantling tile work (thickness 10 to 25mm) in floors/wall including cement mortar and stacking material within 50 metres lead complete all as specified and as directed.

M&L for providing and laying joint free coloured non-skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38sqm laid over and incuding 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for providing and laying joint free coloured non-skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38sqm over and includning 10mm thick rendering in CM 1:4 on vertical surface such as skirting dado and riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for providing and laying Double charge vitrified tile polished finish of size 600 x 600 mm and 8 to 10 mm thick in floor in any colour and shade with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid over and including on 15 mm thick screed bed 1:4 set and jointing with neat cement slurry and pointing in white cement and matching pigments etc. complete all as specified and directed

M&L for providing and laying double charge Vitrified tiles polished finish of size 600 x 600mm and 8 to 10mm thick in any colour and shade with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over and including 10mm thick rendering in CM 1:4 set and jointing with neat cement slurry and pointing in white cement & matching pigments etc. complete all as specified and directed.

M&L for providing and laying anti skid Vitrified tiles in floor of size 600 x 600 mm and 8 to 10mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid over and including 15mm thick screed bed in CM 1:4 set and jointing with neat cement slurry and pointing in white cement and matching pigments etc. complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab colour black, Cherry/Ruby red for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelswith Area of slab over 0.50 sqm as per direction of Engineer - in - charge

M&L for Ist quality ceramic glazed wall tiles of size 450mm X 300mm X 7mm thick conforming to IS: 15622, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick rendering in cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

M&L for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

M&L for dismantling G.I. pipes of 15 to 40mm dia nominal bore including including all fittings manually/ by mechanical means and stacking of pipes within 50 metres lead as per direction of Engineer-in-charge .

M&L for providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

M&L for providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

M&L for providing and fixing 20mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and as directed.

M&L for providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm dia of approved quality complete all as specified and as directed.

M&L for providing and fixing 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete all as specified and as directed.

M&L for providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and as directed.

M&L for providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length

S&F White Vitreous china Orissa pattern W.C. squatting pan (Indian type) of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed.

M&L for providing and fixing 100 mm nominal dia Circular type PTMT grating of approved quality and colour.

M&L for providing and fixing circular 125mm nominal dia with 25mm waste hole PTMT grating of approved quality and colour complete all as specified and as directed.

Dismantling 75 to 80 mm dia pipe C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead

Dismantling 100 mm dia pipe C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead

S&F 75mm dia unplasticised Rigid PVC pipes single socketed conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion fixed to walls including necessary bracktes clamps or laid in verticle surafce of wall or beneath floor complete all as specified and as directed

ditto as per item 27 above but 110mm dia pipe

M&L for providing and fixing on wall face unplasticised - PVC moulded fittings/Bend 87.5° of 75mm dia for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

M&L for providing and fixing on wall face unplasticised - PVC moulded fittings/Bend 87.5° of 100 mm dia for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

M&L for providing and fixing on wall face unplasticised - PVC moulded Single tee with door accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion of size 75x75x75 mm.

Ditto all as per item ser No 31.00 here-in-before but of size110x110x110 mm.

M&L for providing and fixing on wall face unplasticised - PVC moulded Single tee without door accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion of size 75x75x75 mm.

Ditto all as per item ser No 33.00 above but of size 110x110x110 mm

S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M&L for providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

M&L for providing and fixing in repair White Vitreous China wash basin of size 630x450mm with C.I. brackets, single 15 mm C.P. brass swan kneck pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and as directed.

S&F in repair white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed.

M&L for providing and fixing 15mm nominal bore C.P. brass angle valve of approved quality conforming to IS:8931 complete all as specified and as directed.

M&L for providing and fixing 32 mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

M&L for providing and fixing in repair Stainless Steel A ISI 304 (18/8) kitchen sink without drain board of size 610x510 mm bowl depth 200 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and as directed.

S&F Health faucet mild steel chromium plated sutiable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making conncetion and fixed in position complete all as specified and directed.

M&L for providing and fixing PTMT towel rail 600mm long with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. all as specified and as directed.

M&L for providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms as specified and directed

M&L for providing and fixing PTMT Bottle Trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 260 gms for Wash basin and sink complete all as specified and as directed.

M&L for providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms as specified and directed

S&F in repair CP brass toilet paper holder complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L Kota stone 25 mm thick slabs 18- 20 mm thick in risers of steps, skirting, dado trade and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and mirror polishing complete

M&L Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand)

M&L for Steel work welded in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

Taking down cement plaster on brick, stone or concrete wall including racking out joints, hacking for key scrubing down with water complete all as specified and directed.

M&L for 15mm thick in cement plaster in CM 1:4 (1 cement : 4 fine sand) on brick or concrete surfaces with water proofing compound finished even and smooth w/o using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately

M&L for 5mm thick in cement plaster in CM 1:3 (1 cement : 6 fine sand) on ceiling surfaces finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for 10 mm cement plaster in CM 1:4 (1 cement: 4 fine sand) on rough side of single or half brick wall/PCC blocks /concrete surface of complete all as specified and directed.

M&L for distempering two or more coats with oil bound washable distemper of approved brand and manufacture to give an even shade on newly plastered wall or ceiling surfaces over a coat of water thinnable cement primer over 1 mm thick wall care putty complete all as specified and as directed.

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on newly plastered surfaces of wall (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

M&L distempering One or more coats on old work with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour over 1 mm thick wall care putty complete as per manufacturer's specification

M&L for prepration of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for prepration new wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for prepration old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for providing and fixing 25 mm thick Panelled shutters for cup board etc.Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws complete all as specified and directed.

M&L for providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. complete all as specified and directed by Engr-in-Charge.

M&L for dismantling doors, windows and clerestory windows (steel or wood or aluminium) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sqm and below complete all as specified and as directed.

M&L for taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead of area 3 sqm and below complete all as specified and as directed.

M&L for providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge

M&L for providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

M&L for providing and fixing aluminium work for powder coated (min thickness of powder coating 50 micron) aluminium frame for doors, windows, sliding windows,ventilators, partitions etc with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per and the directions of Engineer-in-charge.

M&L for filling the gap upto 5mm depth and 5mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

M&L for providing and fixing glazing with float glass panes of 5mm thickness (weight not less than 12.5kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge.

M&L for providing and fixing glazing with frosted glass panes of 4mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge.

M&L for providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer and fixed to opening/ alu windows with rawl plugs screws complete all as specified and as directed.

M&L for providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, using 30x6 mm flats for diagonal braces and central crss piece including all necessary fittings and applying a priming coat of approved steel primer complete all as specified and as directed.

M&L for providing kiln seasoned and chemically treated hollock wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

M&L for cutting holes into brick wall built in cement mortar up to 30x30 cm for inserting hold fast including making good the same with CM 1:3 or cement concrete 1:2:4 complete all as specified and as directed.

M&L for providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

M&L for providing and fixing aluminium hanging twin rubber floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

M&L for providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

M&L for providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

200x10mm size

150x10mm size

M&L for providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified

M&L for providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :

35 mm thick shutters

30 mm thick shutters

M&L for providing and fixing Kiln seasoned and chemically treated hollock wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

M&L for providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm.

M&L for providing and fixing oxidised M.S casement stays (straight peg type) of length 250 mm weighing not less than 150 grams with necessary screws etc. complete

M&L for Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of broken stone or boulder of 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and as directed.

Demolishing of brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

M&L for brick work with subclass 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolishing of R.C.C. work in overhead water tank ,chajjas etcmanually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

M&L for reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

M&L for centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges

M &L for TMT bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and as directed.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge

M&L for providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified

M&L for diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration complete all as spd & directed.

M&L for providing and fixing ball valve 25 mm nominal bore(brass) of approved quality, High or low pressure, with plastic floats complete

Supply only integral water proofing compound.

Taking down copper/aluminium point wiring for one light/fan/call bell point or buzzer controlled by one switch complete including fittings/fixtures such as switches,ceiling rose, holder, socket, etc & making good disturbed surfaces of walls, ceilings etc all as specified and directed by Engr-in-Charge

M&L for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required and complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/Aluminium submain wiring of any type for Socket or power point complete including fittings and fixures such as switches, sockets, GI box, industrial socket, etc. all as directed by Engr-in-Charge

M&L for wiring for circuit/ submain wiring alongwith earth wire with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

M&L for wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supply & fix brass bracket angle/batten holder

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. all as specified and directed by Engr-in-charge

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of single pole and Neutral the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 100 A rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Taking out unserviceable DBs of any type / capacity incl MCBs

Supplying and fixing 6 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 8 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of 4 ways(4+12) double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required and complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/Aluminium submain wiring of any size and type

M&L for wiring for circuit/ submain wiring alongwith earth wire with 2 x 6 sqmm + 1x6 sqmm size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

All as per item no 123.00 above but 4 X 10 sqmm 2X6 sq mm

M&L for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25 mm x 5 mm as earthing lead by means of bolt, nut, check nut and washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

M&L for providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc.as required.

Taking out old unserviceable GI strip

Taking out and refixing of existing LED tube light fitting in same position after wall/roof plaster, painting work,etc

Supply and fix LED tube light 20 W with fixture including taking down old unserviceable fittings

Supply and fix LED tube light 10 W with fixture including taking down old unserviceable fittings

Supply and fix LED bulk head 10 Watt light fitting including taking down old unserviceable fittings

Supply and fix LED bulb 9W

Supply and fix LED decorative wall bracket light fittings, stainless steel, rust free fixture with white glass diffuser suitable for 9 W LED lamp including taking down old unserviceable fittings

Taking down of ceiling fan from ceiling hook of size1200/1400 mm sweep for cleaning, scraping, painting, greasing and replacement of unserviceable bearing/bushing, etc and refixing at existing position

Taking down of exhaust fan of size upto 450 mm sweep for cleaning, scraping, painting, greasing and replacement of unserviceable bearing/bushing, louvers, etc and refixing at existing position

m/s harish kumar punera (BID ID -3288401)