Karnataka

To Be Opened

Works

Buildings

Providing Painting, Repairs to toiltes, Polishing to windows, doors, Renovation of kitchen, fixing of new wardrobe and other allied works to Room no 540, LH-4, Bangalore.( Reserved For SC).

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 29 Apr 2026Closed

Timeline

Published22 Apr 2026
Closed29 Apr 2026
Bid Opening30 Apr 2026

Tender Value

Refer Docs

EMD Value

₹8,100

Closing Date

29 Apr 2026, 10:35 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Providing Painting, Repairs to toiltes, Polishing to windows, doors, Renovation of kitchen, fixing of new wardrobe and other allied works to Room no 540, LH-4, Bangalore.( Reserved For SC)

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT21372/CALL-2

Reference Number

PWD/2025-26/BD/WORK_INDENT21372/CALL-2

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredAnnual turnover certificate along with UDIN

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

RequiredBid Capacity Calculation as per KW 1 Document

RequiredReserved Category Certificate along with domicile certificate, Should upload Domicile certificate for having been a resident of Karnataka for not less than 10 years issued by the competent authority

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-1 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Conditional tenders are not accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

The bidder should be a reputed company registered as a Class IV and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

The Tenderer should submit Latest GST clearance certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs of all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labours deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

Bidder should upload the bid capacity calculated as per KW-1 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

The Quoted Rates Shall be Excluding GST

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b)Satisfactory completion as prime contractor in any civil engineering construction works to an extent of 25% of the cost of the work i.e. Rs 1.60 Lakhs

Work Done Certificate

Capabilities of Vendor

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least one financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 6.42 lakhs

Audited CA Certificate of Annual Turnover

Financial Status

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 3 month. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 3 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹8,100

Important Dates

Last Activity

22 Apr 2026

Published

22 Apr 2026

Bid Opening

30 Apr 2026

Download Ends

24 Apr 2026

BOQ Preview

•

Providing Painting, Repairs to toiltes, Polishing to windows, doors, Renovation of kitchen, fixing of new wardrobe and other allied works to Room no 540, LH-4, Bangalore

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards.

•

Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour, lead, complete as per specifications.

•

Removing the mosaic tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete includ...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous c...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Premium

•

Providing and fixing 600x120x5 mm Glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws,...

•

Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...

•

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...

•

Providing and fixing Single lever Bib cock Long Nose (Lifting type cold water cartridge) with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary ...

•

Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - clas...

•

French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, s...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Repairs to existing Modular kitchen with Baskets, hinges, sliders/Drawer, planks including finishing cost of materials, labour, complete as per specifications

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Providing and fixing wall paneling, over the 50mm x35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled with 50mm thick 32kg density glass wool and top covered out of 1...

•

Providing and fixing jaguar Health Faucet with 1 mt long easy flex tube in chrome finish & wall hook of ALD - 565 or equivalent model ,including necessary fixing camps, screws etc , ,the rate includes...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

21372 - SC Kw-1.docx

Tender Document • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Buildings

Providing Painting, Repairs to toiltes, Polishing to windows, doors, Renovation of kitchen, fixing of new wardrobe and other allied works to Room no 540, LH-4, Bangalore.( Reserved For SC).

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 29 Apr 2026Closed

Timeline

Published22 Apr 2026
Closed29 Apr 2026
Bid Opening30 Apr 2026

Tender Value

Refer Docs

EMD Value

₹8,100

Closing Date

29 Apr 2026, 10:35 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Providing Painting, Repairs to toiltes, Polishing to windows, doors, Renovation of kitchen, fixing of new wardrobe and other allied works to Room no 540, LH-4, Bangalore.( Reserved For SC)

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT21372/CALL-2

Reference Number

PWD/2025-26/BD/WORK_INDENT21372/CALL-2

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredAnnual turnover certificate along with UDIN

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

RequiredBid Capacity Calculation as per KW 1 Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-1 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

Conditional tenders are not accepted.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal

The bidder should be a reputed company registered as a Class IV and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

The Tenderer should submit Latest GST clearance certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs of all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labours deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

The Quoted Rates Shall be Excluding GST

Technical Criteria

Past Experience

Work Done Certificate

Capabilities of Vendor

Audited CA Certificate of Annual Turnover

Financial Status

Others -- bid capacity

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹8,100

Important Dates

Last Activity

22 Apr 2026

Published

22 Apr 2026

Bid Opening

30 Apr 2026

Download Ends

24 Apr 2026

BOQ Preview

•

Providing Painting, Repairs to toiltes, Polishing to windows, doors, Renovation of kitchen, fixing of new wardrobe and other allied works to Room no 540, LH-4, Bangalore

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards.

•

Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour, lead, complete as per specifications.

•

Removing the mosaic tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete includ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous c...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Premium

•

Providing and fixing 600x120x5 mm Glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws,...

•

Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...

•

Providing and fixing Single lever Bib cock Long Nose (Lifting type cold water cartridge) with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary ...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Repairs to existing Modular kitchen with Baskets, hinges, sliders/Drawer, planks including finishing cost of materials, labour, complete as per specifications

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

21372 - SC Kw-1.docx

Tender Document • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid