Laying of pavers in front of colony gate including an approach to nearby medical unit and front wall fascia with granite at AgGBPS

Amount

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. -All kinds of soi

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level:1:3:6 ( 1 Cement:3 fine sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying 60mm thick factory made c.c interlocking paver block of M30 Grade made by block making machine with strong vibratorey compaction , of approved size , design and shape , laid in required colour and pattern over and including 50mm thick compacted bed of sand , filling the joints with fine sand etc. all complete as per specification and approval / direction of the Engineer-in?charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture. New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture.

Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for replastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- incharge.

14 mm thick Granite of any colour and shade duly approved:- Area of slab over 0.50 sqm

Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:3 ( 1 cement : 3 fine sand ).

12 mm cement plaster of mix : Cement mortar 1:4 (1 cement : 4 fine sand)

25mm thick PVC flush door shutters upto 737mm width of colour and shade as approved by Engineer-incharge made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1 mm ± 0.3 mm . PVC foam end cap ofsize 23 × 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm . An MS tube having dimensions 19mm × 19 mm is insetred along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25×11 mm . Door shutter shall be reinforced with special polymeric reinforcements as per manufacturers' specification and drawing to take up necessary hardware and fixtures complete. Stickers indicating the locations of hardware will be pasted at appropriate places.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer?In-Charge.

Bidder Name

Amount in Words

AMAL DEBNATH

SUBRATA DEBNATH

DIPAK DEBNATH

DIPAK DEBNATH

SUBRATA DEBNATH