ADDN/ALTN CUM SPECIAL REPAIR OF CERTAIN OTM ACCN AT GHUNGHORA GRN IN DEHRADUN

Amount

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wall and ceiling boards, fiber or pulp, insulation etc. in insulation boards slabs, blankets any thickness incl cover fillets complete all as specified and directed.

Dismantling timber scantling 40 sqcm & over in section unframed in any position complete all as specified and directed.

Taking down roof trusses or coupled rafters clear span 4 m and up to 8 m complete all as specified and directed.

Ditto as above in fillets, rails, posts, rafters, purlins, etc. unframed work under 40 sq. cm in section complete all as specified and directed.

Demolition of brickwork built in CM as in walls, parapets and pillars including all quoins, arches, pillars, etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

All as per item No 7 above, but except bricks including cleaning of bricks obtained from item No 6 above.

M&L for brick work with sub class 'B' bricks, in half brick thick wall built in CM 1:4 straight or curved on plan to any radius with old size bricks complete all as specified and directed.

M& L for 40 mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L RCC (1:2:4), type B1 as in n lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, copings benching, bedplates etc. including all necessary formwork etc. complete all as specified and directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 13 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders.

S&F mild steel work as in tubular or other section conforming to Fe-290 (Gde E165) as in main and cross beam hip and tack trusses, rafter and purlins where commenced to common rafter fixed with and including cleats or other coonnected plates complete all as specified and directed

M & L for mild steel bands, straps, including bolts, if required, handmade sliding bolts, clamps. hold fasts; wall ties, hooks for hanging fans, plain angle cleats for securing purlins to trusses or rafters two way or three-way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for preparing new steel or iron surfaces over 10 cm width or girth and applying two coats of black Japan paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F Pre - Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self-tapping screws complete all as specified and directed.

Supply & fixing false ceiling of Designer ceiling tiles Ivory painted ready to use (made of high-quality Fibre cement boards ) of size 595x595mm, 4mm thick and any one of the design (Cascade or Electra texture )

in true horizontal level, suspended on exposed inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights complete all as specified and directed.

Demolition of cement concrete in ground floors, pavings and plinth protection n exc 15 cm thick (below or above ground level) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete as directed and specified.

M & L 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) including necessary form work as in sub base for flooring etc., complete all as specified and directed.

M & L for 18 to 22 mm thick machine cut pre polished Kota stone tile as in flooring, with and including 15 mm thick screed bed in CM 1:6, Kota stone shall be in single piece for treads and staircase, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing incl full round bull nosing complete all as specified and directed.

M & L for 12 to 15 mm thick machine cut pre polished Kota stone tile Kota stone as in riser of steps / staircase, in full length in single piece without joint, with groove cutting in double line of stair width / skirting with and including 10 mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) and bull nosing complete all as specified and directed.

M & L 15-16 mm thick granite (colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform / dado / skirting / platform counter top WHB including cutting holes for oval shape etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) of size 600 x 600 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, complete all as specified and directed.

M&L Glazed ceramic tiles coloured 300mmx 450mm , 7 to 8 mm thick, on vertical surface of wall such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1, (20 mm graded crushed stone aggregate) as in plinth protection finishing even and smooth without using extra cement including forming construction joint 30 mm deep x 10 mm wide, filled with mastic filling 1 part bitumen and 3 parts of sand complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil complete all as specified and directed.

Returning filling in, including spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in any type of soil complete all as specified and directed.

Removing excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5m above the starting point, soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in surface channels and drains (Saucer Drain) complete all as specified and directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings and laid in trenches, 20 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F 500 litre rotational moulded triple layer polyethylene water storage tanks white colour (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs 1000 litre rotational moulded triple layer polyethylene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I complete all as specified and directed.

S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore chromium plated, fancy type. long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs PVC SWR floor trap outlet dia 75mm, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC SWR gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC SWR pipe 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F in repairs PVC SWR pipe 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F in repairs PVC SWR bends 75 mm complete all as specified and directed.

Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

Raking out joints/ pointing to brick work/stone masonry in wall etc built in cement mortar complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and fair complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair without using extra cement. Complete all as specified and directed.

M & L for preparation of new wall surface and applying 0.75 to 1 mm thick Birla white/ JK wall care putty over internal and external plaster to make the surface smooth complete all as specified and directed.

Preparation of new plastered or un plastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted complete all as specified and directed.

Preparation of new plastered or un plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each including cutting holes for taking out of holdfast & making good in CM (1:4) after fixing new chowkats/ frames complete all as specified and directed.

All as per item No 56 above but not exc 1.5 Sqm each.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one or more rebate including necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

M&L for cement concrete 1:3:6, type C-0 (12.5 mm graded stone aggregate) as in bedplates, filling in pressed steel door frames etc. including all necessary formwork etc. complete all as specified and directed.

M&L framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; railings; framework of water tanks and similar work conforming to Fe. 290.Gde-E-165 complete all as specified and directed.

S&F factory made steel window (Box type) with side hung shutters precoated (colour coated/powder coated) with double shutters (glazed and gauged shutter both) with frame complete all as specified and directed on drg TD 158 sheet 1/2 & sheet 2/2 Note : Measurement shall be taken and paid compositely for frame, glazed and gauged. Grill shall be measured and paid separately under respective item. No extra claim shall be entertained on this ground.

Blank

S&F second class hard wood, 35mm thick glazed, and skeleton factory made door shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels including both sides prelaminated, commercial type on both sides complete all as specified and directed.

Blank

S&F first class hard wood (shesham) small fittings such as brackets of any type, door stoppers and like including all necessary labours, articles n exc 200 cucm each complete all as specified and directed.

Material and labour for 4mm sheet glass, ordinary quality and glazing with oil putty / pins /spring pins and wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed.

S&F powder coated mild steel butt hinges medium weight cold rolled, size 100 mm complete all as specified and directed.

All as per item No 70 above but 50 mm size.

S&F powder coated mild steel pressed handles, oval type, of 150 mm size complete all as specified and directed.

S&F Mild steel barrel tower bolts, powder coated with bright bolt and fixed, 200 mm length of bolt complete all as specified and directed.

S & F floor door stopper of powder coated aluminium body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140 mm and fixed to door shutters complete all as specified and directed.

S&F 300 mm long, powder coated mild steel sliding door bolts, plate type, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F 20 mm dia Stainless Steel 1 mm thick curtain rod including fancy type brackets, end caps etc. fixed to wall and 8 Nos curtain rings per RM (minimum) complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F anodised aluminium ornamental grills including cutting opening for ACs/ Coolers etc complete all as specified and directed.

S&F aluminium gate and shutter, hooks and eyes plate type -II, 125mm size complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc complete all as specified and directed.

Use and waiste form work to sides and soffits of cantilevers, shelves incl supports overhang etc, rough finished surfaces of concrete flat, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanized, width of flap 30 mm complete all as specified and directed.

M&L for construction of Soakage wells 2.40 m internal dia and 3.00 m effective depth complete all as specified in PS here in after and shown on drawing No CEBZ TD Drawing No. 309 Sh 1 to 4/4.

S&F vitreous china wash hand basin white flat back of size 550x400mm, including brackets, CP waste coupling & waste pipe complete all as specified and directed.

S&F 15mm size PVC connection with PTMT nuts length 450mm long complete all as specified and directed.

S&F stop valves/ angle valve 15mm bore fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore brass CP fancy type pillar tap for wash basin screwed down for iron pipe and fixed complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified and directed.

S&F pre-cast cement concrete1:2:4 type B-1(20 mm graded stone aggregate) kerb stone of size 450x 300x 150 mm or 300x 300x150 mm (as directed) with plain fair faces including necessary earthwork and removal complete all as specified and directed.

M&L for preparing new plastered or concrete surfaces over 10 cm width or girth and applying two coats of synthetic paint over one coat of plaster primer complete all as specified and directed.

M&L for Sand filling under floors for laying paver block complete all as specified and directed.

M&L for Machine pressed glossy coloured finish precast concrete interlocking paver block made from grey cement with pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D-1 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified.

M&L PCC 1:2:4 type B-2 using 20mm graded stone aggregates as in foundation, posts filling and mass concrete complete all as specified and directed.

S&F mild steel angles, tees, flats, C section, MS square bars, MS Tubes etc as in steel gates, steel posts and struts in fencing, grills including embedding in concrete and screwing etc. including cut to shape as directed, drilling holes, notching for wire etc including all necessary drilling, bolting, welding or riveting and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS Galvanised fencing any size or type complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type Sqm B-0 (12.5mm graded aggregate) for laying floor finish complete all as specified & directed

M&L two coat of synthetic enamel paint over one coat red oxide primer red primer incl preparation of steel new surface complete all as specified & directed

M&L 16 to 20mm thick marble stone for flooring with including 15mm thick screeding bed in AM (1:6) complete all as specified and directed

M&L Chequered Glossy finish tile of size 300 x 300 x 25mm thick machine pressed set jointed and pointed in neat cement slurry over 15mm thick screeding bed in CM (1:6) in floor with grey cement and pigment complete all as specified and directed.

M&L for new point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings with cutting chases and all accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continuous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed of the following. (Note: Colour code shall be maintained as per IE rule)

(a) One light point /bell buzzer point controlled by one-one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No 108.04 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

S&F switch piano flush, button type 5 Amp SP 230 V AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 230 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp 230 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp flush type complete all as specified & directed.

S&F stepped socket type electronic fan regulator flush type120watts complete all as specified & directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 230 V AC complete all as specified & directed.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified & directed.

M&L in replacement sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings with chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old sub main wiring .

Supply & fixing in replacement and Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earth bar and cable ties for cable management including Provision of MCCB 63 Amps, ICs=100%ICu, 16KA four pole as in comer including connecting terminal strip complete and SP MCBs as outgoing etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 including taking out old unserviceable DB and removing from site complete all as specified and directed. Note: - MCB/ MCCB shall be measured and paid separately.

S&F in replacement sheet metal enclosures 240 volt with 200 amps rated copper bus bar for double door 8-way IP-43DB's lk-09suitable for one MCB SPN as incoming and 6 MCB SP as outgoing, mounting flush on wall and making good disturbed surfaces including taking down old unserviceable DBs complete all as specified and directed. Note: - MCBs shall be measured and paid separately.

S&F MCB double pole 240 Volt 10 KA 40-63 Amp 'B' series conforming to ISI marked complete all as specified & directed.

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked complete all as specified & directed.

S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

S&F in replacement wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed including taking down old tube light fitting complete all as specified & directed. Make : BAJAJ CAT PART No. BC150.20W-WH (Batten), BLRB 20W LED (Tubes) CROMPTON – DIJB12LT.8.20 (Batten) LT 8.20-865 (Tube) HAVELLS – REGAL BATTEN BUPT01X20WJSBS (Batten) PHTON ULTRAE2.01213T118WLED865SPC (Tube)

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed. Make Havells/ Crompton /Philips

Supply & fix ceiling Fan 1200 mm sweep single phase 230 volts50 watts (Energy saving Fan) with down rod, canopy, blades etc including connecting with twisted three cord flexible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan and writing MES NO on fan complete all as specified and directed.

S&F air ventilation fan metallic body 300mm, 900 RPM with louvers, single phase, 230V AC including necessary, M&L for making hole fixing arrangement on wall with frame holdfast, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector complete all as specified & directed. Make : HAVELLS – Ventilair DS BAJAJ – Supreme DLX ISI USHA – Arocleon AF

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed.

Supply and Fixing Integral LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 35 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI bracket made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point complete all as specified & directed. Make : CROMPTON – LSTS-36.CDL-M WIPRO – LRO6-501-XXX-57-XX BAJAJ – ENXTP-35L WH POPCSD

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified & directed.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid.

Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.

Suppy and fix GI pipe 40 mm light grade galvanised with all fitting laid in trenches for protection of cable

RAMAPATI ENGINEERING SERVICES

MOHAN LAL GUPTA

M/s Arihant Builders

M/S Manmohan Singh Anand

m/s gupta construction

Alankar Traders

Som Prakash Gupta

Panwar Construction Co.