AUGMENTATION OF SEWER LINE AND CONTROL PANEL BOARD IN VARIOUS HEAD WORKS AT MAHUVA TOWN, MAHUVA DIST. BHAVNAGR UNDER 15th VIVEKADHIN SCHEME ( 4th ATTEMPT )

NAME OF WORK: - AUGMENTATION OF SEWER LINE AND CONTROL PANEL BOARD IN VARIOUS

HEAD WORKS AT MAHUVA TOWN, MAHUVA DIST. BHAVNAGR UNDER 15% VIVEKADHIN SCHEME (

SR. NO. DISCRIPTION AMOUNT

SCHEDULE AUGMENTATION OF SEWER LINE AND CONTROL PANEL BOARD IN VARIOUS

B-1 HEAD WORKS AT MAHUVA TOWN, MAHUVA DIST. BHAVNAGR UNDER 15%

VIVEKADHIN SCHEME ( 4th ATTEMPT )

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs.12,26,179.00 Tendered amount put to tender Rs.12,26,179.00

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Mahuva Nagarpalika Mahuva Nagarpalika

MAHUVA NAGARPALIKA

NAME OF WORK : - AUGMENTATION OF SEWER LINE AND CONTROL PANEL BOARD IN VARIOUS HEAD

WORKS AT MAHUVA TOWN, MAHUVA DIST. BHAVNAGR UNDER 15% VIVEKADHIN SCHEME ( 4th

Qty Unit Description Rate

Excavation for pipe line trenches for water supply, sewerage line,

manhole etc. all with shoring and struting if required as per required

1 gradient and line including safety provisions using site rails and stacking

excavated stuff including up to all required lead cleaning the site etc.

complete for all lifts and strata as specified.

Upto 0.00m to 1.50m

2.52 Cum In all sorts of soil and soft murrum 102.35

2.52 Cum In hard murrum, boulders 155.25

2.52 Cum In Soft Rock 187.45

17.64 Cum In Hard Rock 427.80

RCC pipes( horizontal cast) : Providing and supplying ISI standard RCC

pipes (of sulphate resistance cement) in standard length of following

class and diameter suitable for rubber ring joints, including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance, to departmental stores, staking etc.

Note: One collar should be supplied with each full length plain ended

RCC pipe, cost included in rates below. One rubber ring should be

supplied with each full length socketed pipe, cost included in rates

20.00 Rmt 5) Class NP3 test pressure 0.7 kg/sq.cm 300 mm Dia 755.00

Lowering, laying and jointing, RCC pipes in C:M 1:1 1/2 of following

diameters in proper position grade alignment, as directed by engineer in

charge, including, conveyance from store to site work, layout giving

hydraulic testing as per ISI code.

Refilling the pipeline trenches incl. ramming, watering, consolidating

desposal of surplus stuff as directed within a radius of 3 km.

S.I.T.C of LV ATS - MCC Panel totally enclosed, dust & bermin proof,

indoor type, minimum degree of protection - IP 52 as per IS:

operation on 3- Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments accomodating LED type

indicating lamps, control contactors as per IS: 13947, CT of accuracy

class- I as per IS: 2705, relays, meters & control MCBs, air insulated

electrolitic grade Aluminum busbar for three phase & neutral system

with incomming breaker- microprocessor based Air Circuit Breakers

(electrically operated drawout type)/ air break fixed type MCCB with

trip free mechanism, current limiting type as per IS: 8828, Motor

Contractor (as per type -2 coordination), Overload Relay with built-in

single phasing prevention feature & auxiliary feeders as per SLD

drawings, momentary contact type push buttons, equipment fittings, bus

bars, cable boxes, cable gland, incoming & ougoing cable connection for

1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated &

PVC sheathed armoured cable, 10% spare terminals, power wiring using

1100V grade, FRLS insulated copper conductor wires conforming to IS:

694 & 8130, cable compartments/ alleys of minimum 300 mm size, GI

earth bus bar for entire length. With required capacity of fixed / dynamic

APP type capacitor banks in MCC panels.

Each capacitor shall be provided with capacitor duty (AC 26 B)

contactor and MCB (only D Curve) of required amperage. The fixed

capacitor bank type panels should be suitable to improve power factor

from 0.85 lag to 0.95 considering total working load MCC shall be

fabricated from cold rolled, coled annealed (CRCA) sheet steel &

minimum thickness of various members shall be as follows: Base Frame/

Channel/ Gland Plate - 3 mm, Load Bearing Members/ Doors - 2 mm

and Internal Partitions - 1.6 mm - as per Technical Specification with

Encloser size of Minimum Depth 1500mm with 600 mm L x 2175 mm

H) or as per requirement ATS Strater minimun - 10 Kw incomming &

KW Two outgoing Working Feeder & Extra feeder 63 A - 1 No + 5KW

- 3 Nos. for Auxilary load + 32 A -2 No.

Microprocessor based Soft Starter with built-in by pass

contactor,Semiconductor Fuses, Harmonic Filters, cast resin type CT,

Digital MFM Analog Ammeter & minimum 10 Channel Temperature

Scanner with RS 485 communication port

3.00 No. 700 x 600 x 2175mm- 95HP Motor at Compose Pumping Station 275000.00

1.00 No. 700 x 600 x 2175mm- 25HP Motor at Gaghati Pumping Station 143000.00

1.00 No. 700 x 600 x 2175mm- 25HP Motor at Kishan Pumping Station 143000.00

1.00 No. 700 x 600 x 2175mm- 10HP Motor at Meldi Mata Pumping Station 88000.00

Total Net Cost in Rs.

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 12,26,179.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Mahuva Nagarpalika Mahuva Nagarpalika