Loading…
Loading…
Updated dates
ancellation of tender
This tender has been cancelled
All bids rejected in technical evaluation
cancelled_1.pdf
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
20 Mar 2026, 3:00 pmClosed
SK BARMAN
DGM (PURCHASE /Store)URANIUM CORPORATION OF INDIA LIMITED, PURCHASE DEPT ,VEMULA MANDAL, YSR DISTRICT, AP 516349.
Supply of BONIFIGLOLI GEAR BOX SPARES
2026_UCIL_264479_1
TMPL/RC/BONIFIGLOLI GEAR BOXES SPARES/383
Open Tender
Miscellaneous Goods
365 days
UCIL, Tummala Palle
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹10,000
Yes
18 Apr 2026
28 Jan 2026
21 Mar 2026
28 Jan 2026
20 Mar 2026
28 Jan 2026
Model-1: Model: AS55 DF P112, Code: 1900000950717270002, Batch:6/19, V1, i:33:2, Application : i) Neutralization tank agitator ii) Precipitation tanks in chemical house iii) Causticization tanks
Casing with flange (Part no. 2) for model-1
Cover (Part no. 3) for model-1
Internal support (Part no. 4) for model-1
gasket (Part no. 5) for model-1
gasket (Part no. 6) for model-1
Extended 1st reduced pinion (Part no. 7) for model-1
Bored 1st reduced pinion (Part no. 8) for model-1
Gear wheel 1st reduction (Part no. 9) for model-1
Gear wheel 2nd reduction (Part no. 10) for model-1
Pinion 3rd reduction (Part no. 11) for model-1
Gear wheel (Part no. 12) for model-1
Cap (Part no. 13) for model-1
Bored input shaft (Part no. 14) for model-1
Oil seal (Part no. 15) for model-1
Oil seal (Part no. 16) for model-1
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-1
Bearing (Part no. 21) for model-1
Bearing (Part no. 22) for model-1
Bearing (Part no. 23) for model-1
Bearing (Part no. 24) for model-1
Key (Part no. 25) for model-1
Key (Part no. 26) for model-1
Key (Part no. 27) for model-1
Key (Part no. 28) for model-1
Key (Part no. 29) for model-1
Level plug (Part no. 30) for model-1
Drain plug (Part no. 31) for model-1
Breather plug (Part no. 32) for model-1
Parallel pin (Part no. 33) for model-1
Parallel pin (Part no. 34) for model-1
Hex head screw (Part no. 35) for model-1
Hex head screw (Part no. 36) for model-1
Hex head screw (Part no. 37) for model-1
circlip (Part no. 38) for model-1
circlip (Part no. 41) for model-1
circlip (Part no. 42) for model-1
2 nd reduction pinioin (Part no. 45) for model-1
out put shaft (Part no. 47) for model-1
spacer ring (Part no. 48) for model-1
circlip (Part no. 58) for model-1
circlip (Part no. 39) for model-1
Extended input shaft (Part no. 50) for model-1
Key (Part no. 51) for model-1
Input Assembly
Output assembly
Model-2: AS60 DF P112, Code: I 11799930001,Batch:4/10, V1, I:37:1, Application : Feed tank agitator - SSR
Casing with flange (Part no. 2) for model-2
Cover (Part no. 3) for model-2
Internal support (Part no. 4) for model-2
gasket (Part no. 5) for model-2
gasket (Part no. 6) for model-2
Extended 1st reduced pinion (Part no. 7) for model-2
Bored 1st reduced pinion (Part no. 8) for model-2
Gear wheel 1st reduction (Part no. 9) for model-2
Gear wheel 2nd reduction (Part no. 10) for model-2
Pinion 3rd reduction (Part no. 11) for model-2
Gear wheel (Part no. 12) for model-2
Cap (Part no. 13) for model-2
Bored input shaft (Part no. 14) for model-2
Oil seal (Part no. 15) for model-2
Oil seal (Part no. 16) for model-2
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-2
Bearing (Part no. 21) for model-2
Bearing (Part no. 22) for model-2
Bearing (Part no. 23) for model-2
Bearing (Part no. 24) for model-2
Key (Part no. 25) for model-2
Key (Part no. 26) for model-2
Key (Part no. 27) for model-2
Key (Part no. 28) for model-2
Key (Part no. 29) for model-2
Level plug (Part no. 30) for model-2
Drain plug (Part no. 31) for model-2
Breather plug (Part no. 32) for model-2
Parallel pin (Part no. 33) for model-2
Parallel pin (Part no. 34) for model-2
Hex head screw (Part no. 35) for model-2
Hex head screw (Part no. 36) for model-2
Hex head screw (Part no. 37) for model-2
circlip (Part no. 38) for model-2
circlip (Part no. 41) for model-2
circlip (Part no. 42) for model-2
2 nd reduction pinioin (Part no. 45) for model-2
circlip (Part no. 58) for model-2
circlip (Part no. 39) for model-2
Extended input shaft (Part no. 50) for model-2
Key (Part no. 51) for model-2
Spacer ring (Part no. 46) for model-2
Out put shaft (Part no. 49) for model-2
circlip (Part no. 57) for model-2
Input Assembly
Output assembly
Model-3: AS60 DF P132, Code:I11800030001, Batch:4/10, V1, I:33:4,Application : i) Filtrate tank agitator - SSR & ii) GSM tank - SSR iii) Clarifier underflow tank
Casing with flange (Part no. 2) for model-3
Cover (Part no. 3) for model-3
Internal support (Part no. 4) for model-3
gasket (Part no. 5) for model-3
gasket (Part no. 6) for model-3
Extended 1st reduced pinion (Part no. 7) for model-3
Bored 1st reduced pinion (Part no. 8) for model-3
Gear wheel 1st reduction (Part no. 9) for model-3
Gear wheel 2nd reduction (Part no. 10) for model-3
Pinion 3rd reduction (Part no. 11) for model-3
Gear wheel (Part no. 12) for model-3
Cap (Part no. 13) for model-3
Bored input shaft (Part no. 14) for model-3
Oil seal (Part no. 15) for model-3
Oil seal (Part no. 16) for model-3
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-3
Bearing (Part no. 21) for model-3
Bearing (Part no. 22) for model-3
Bearing (Part no. 23) for model-3
Bearing (Part no. 24) for model-3
Key (Part no. 25) for model-3
Key (Part no. 26) for model-3
Key (Part no. 27) for model-3
Key (Part no. 28) for model-3
Key (Part no. 29) for model-3
Level plug (Part no. 30) for model-3
Drain plug (Part no. 31) for model-3
Breather plug (Part no. 32) for model-3
Parallel pin (Part no. 33) for model-3
Parallel pin (Part no. 34) for model-3
Hex head screw (Part no. 35) for model-3
Hex head screw (Part no. 36) for model-3
Hex head screw (Part no. 37) for model-3
circlip (Part no. 38) for model-3
circlip (Part no. 41) for model-3
circlip (Part no. 42) for model-3
2 nd reduction pinioin (Part no. 45) for model-3
circlip (Part no. 58) for model-3
circlip (Part no. 39) for model-3
Extended input shaft (Part no. 50) for model-3
Key (Part no. 51) for model-3
Spacer ring (Part no. 46) for model-3
Out put shaft (Part no. 49) for model-3
circlip (Part no. 57) for model-3
Input Assembly
Output assembly
Model-4: AS60 DF P132 V1, code: I 11520980002, I: 25.47, Application : Dirty wash water tank
Casing with flange (Part no. 2) for model-4
Cover (Part no. 3) for model-4
Internal support (Part no. 4) for model-4
gasket (Part no. 5) for model-4
gasket (Part no. 6) for model-4
Extended 1st reduced pinion (Part no. 7) for model-4
Bored 1st reduced pinion (Part no. 8) for model-4
Gear wheel 1st reduction (Part no. 9) for model-4
Gear wheel 2nd reduction (Part no. 10) for model-4
Pinion 3rd reduction (Part no. 11) for model-4
Gear wheel (Part no. 12) for model-4
Cap (Part no. 13) for model-4
Bored input shaft (Part no. 14) for model-4
Oil seal (Part no. 15) for model-4
Oil seal (Part no. 16) for model-4
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-4
Bearing (Part no. 21) for model-4
Bearing (Part no. 22) for model-4
Bearing (Part no. 23) for model-4
Bearing (Part no. 24) for model-4
Key (Part no. 25) for model-4
Key (Part no. 26) for model-4
Key (Part no. 27) for model-4
Key (Part no. 28) for model-4
Key (Part no. 29) for model-4
Level plug (Part no. 30) for model-4
Drain plug (Part no. 31) for model-4
Breather plug (Part no. 32) for model-4
Parallel pin (Part no. 33) for model-4
Parallel pin (Part no. 34) for model-4
Hex head screw (Part no. 35) for model-4
Hex head screw (Part no. 36) for model-4
Hex head screw (Part no. 37) for model-4
circlip (Part no. 38) for model-4
circlip (Part no. 41) for model-4
circlip (Part no. 42) for model-4
2 nd reduction pinioin (Part no. 45) for model-4
circlip (Part no. 58) for model-4
circlip (Part no. 39) for model-4
Extended input shaft (Part no. 50) for model-4
Key (Part no. 51) for model-4
Spacer ring (Part no. 46) for model-4
Out put shaft (Part no. 49) for model-4
circlip (Part no. 57) for model-4
Input Assembly
Output assembly
Model-5: AS80 DF P160, Code:I11837100001,Batch:5/10, V1, I:31:2 & Application : Crystalizer tank agtitator
Casing with flange (Part no. 2) for model-5
Cover (Part no. 3) for model-5
Internal support (Part no. 4) for model-5
gasket (Part no. 5) for model-5
gasket (Part no. 6) for model-5
Extended 1st reduced pinion (Part no. 7) for model-5
Bored 1st reduced pinion (Part no. 8) for model-5
Gear wheel 1st reduction (Part no. 9) for model-5
Gear wheel 2nd reduction (Part no. 10) for model-5
Pinion 3rd reduction (Part no. 11) for model-5
Gear wheel (Part no. 12) for model-5
Cap (Part no. 13) for model-5
Bored input shaft (Part no. 14) for model-5
Oil seal (Part no. 15) for model-5
Oil seal (Part no. 16) for model-5
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-5
Bearing (Part no. 21) for model-5
Bearing (Part no. 22) for model-5
Bearing (Part no. 23) for model-5
Bearing (Part no. 24) for model-5
Key (Part no. 25) for model-5
Key (Part no. 26) for model-5
Key (Part no. 27) for model-5
Key (Part no. 28) for model-5
Key (Part no. 29) for model-5
Level plug (Part no. 30) for model-5
Drain plug (Part no. 31) for model-5
Breather plug (Part no. 32) for model-5
Parallel pin (Part no. 33) for model-5
Parallel pin (Part no. 34) for model-5
Hex head screw (Part no. 35) for model-5
Hex head screw (Part no. 36) for model-5
Hex head screw (Part no. 37) for model-5
circlip (Part no. 38) for model-5
circlip (Part no. 41) for model-5
circlip (Part no. 42) for model-5
2 nd reduction pinioin (Part no. 45) for model-5
circlip (Part no. 58) for model-5
circlip (Part no. 39) for model-5
Extended input shaft (Part no. 50) for model-5
Key (Part no. 51) for model-5
Spacer ring (Part no. 46) for model-5
circlip (Part no. 40) for model-5
Out put shaft (Part no. 49) for model-5
circlip (Part no. 57) for model-5
Spacer ring (Part no. 59) for model-5
circlip (Part no. 39) for model-5
Input Assembly
Output assembly
Model:6 AS55 F P100, Code: I11825510001 / 2, Batch:5/10, V1, i: 25:84,Application : Mother liquor tank agitator -SSR
Casing with flange (Part no. 2) for model-6
Cover (Part no. 3) for model-6
Cap (Part no. 5) for model-6
Internal support (Part no. 4) for model-6
gasket (Part no. 6) for model-6
gasket (Part no. 7) for model-6
Extended 1st reduced pinion (Part no. 8) for model-6
Bored 1st reduced pinion (Part no. 9) for model-6
Gear wheel 1st reduction (Part no. 10) for model-6
Pinion 2nd reduction (Part no. 11) for model-6
Gear wheel, 2nd reduction (Part no. 12) for model-6
Bored input shaft (Part no. 13) for model-6
Extended input shaft (Part no. 14) for model-6
Oil seal (Part no. 15) for model-6
Oil seal (Part no. 16) for model-6
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-6
Bearing (Part no. 21) for model-6
Bearing (Part no. 22) for model-6
Key (Part no. 23) for model-6
Key (Part no. 24) for model-6
Key (Part no. 25) for model-6
Key (Part no. 26) for model-6
Key (Part no. 27) for model-6
Key (Part no. 28) for model-6
Level plug (Part no. 29) for model-6
Drain plug (Part no. 30) for model-6
Breather plug (Part no. 31) for model-6
Parallel pin (Part no. 32) for model-6
Parallel pin (Part no. 33) for model-6
Hex head screw (Part no. 34) for model-6
Hex head screw (Part no. 35) for model-6
Hex head screw (Part no. 36) for model-6
circlip (Part no. 37) for model-6
circlip (Part no. 38) for model-6
circlip (Part no. 39) for model-6
circlip (Part no. 40) for model-6
circlip (Part no. 43) for model-6
out put shaft (Part no. 41) for model-6
Spacer ring (Part no. 42) for model-6
Spacer ring (Part no. 46) for model-6
Input Assembly
Output assembly
Model-7: AS30 F P80 V1, code: I 11415010002, i- 24.19, Application : Agitators of Floculant Transfer Tanks(14 V - 13C/D)
Casing with flange (Part no.2) for model-7
Casing with reducer flange (Part no.2/1) for model-7
Cover (Part no.3) for model-7
Internal support (Part no.4) for model-7
Second recuction pinion (Part no.5) for model-7
1 st recduction gear wheel (Part no.6) for model-7
Extended 1st reduced pinion (Part no.7) for model-7
Bored 1st reduced pinion (Part no.8) for model-7
Bored input shaft (Part no.9) for model-7
Extended input shaft (Part no.10) for model-7
Gasket (Part no.11) for model-7
Gasket (Part no.12) for model-7
Oil seal (Part no.19) for model-7
Oil seal (Part no.20) for model-7
Gear head / box
In put assembly
Out put assembly
Bearing (Part no.16) for model-7
Bearing (Part no.17) for model-7
Bearing (Part no.18) for model-7
Key (Part no.21) for model-7
Key (Part no.22) for model-7
Key (Part no.23) for model-7
Key (Part no.25) for model-7
circlip (Part no.26) for model-7
circlip (Part no.27) for model-7
circlip (Part no.28) for model-7
circlip (Part no.29) for model-7
circlip (Part no.48) for model-7
circlip (Part no.49) for model-7
circlip (Part no.31) for model-7
Parallel pin (Part no.32) for model-7
Parallel pin (Part no.33) for model-7
Washer (Part no.34) for model-7
Drain Plug for mod-7
Hex head screw (Part no.35) for model-7
Hex head screw (Part no.36) for model-7
Hex head screw (Part no.37) for model-7
Stud bolts for mod-7
Hexagonal nut for mod-7
Spacer ring (Part no.38) for model-7
Key (Part no.24) for model-7
circlip (Part no.30) for model-7
Out put shaft (Part no.44) for model-7
2nd reduction gear wheel (Part no.45) for model-7
Spacer ring (Part no.46) for model-7
Cap (Part no.47) for model-7
Input Assembly
Output assembly
Model-8: AS45 F P100 V1, Code: I 11072210004, i-25.55, Application : AGITATORS of Floculant Preparation Tanks (14V - 12 A/B/C/D )
Casing with flange (Part no. 2) for model-8
Cover (Part no. 3) for model-8
Cap (Part no. 5) for model-8
Internal support (Part no. 4) for model-8
gasket (Part no. 6) for model-8
gasket (Part no. 7) for model-8
Extended 1st reduced pinion (Part no. 8) for model-8
Bored 1st reduced pinion (Part no. 9) for model-8
Gear wheel 1st reduction (Part no. 10) for model-8
Pinion 2nd reduction (Part no. 11) for model-8
Gear wheel, 2nd reduction (Part no. 12) for model-8
Bored input shaft (Part no. 13) for model-8
Extended input shaft (Part no. 14) for model-8
Oil seal (Part no. 15) for model-8
Oil seal (Part no. 16) for model-8
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-8
Bearing (Part no. 21) for model-8
Bearing (Part no. 22) for model-8
Key (Part no. 23) for model-8
Key (Part no. 24) for model-8
Key (Part no. 25) for model-8
Key (Part no. 26) for model-8
Key (Part no. 27) for model-8
Key (Part no. 28) for model-8
Level plug (Part no. 29) for model-8
Drain plug (Part no. 30) for model-8
Breather plug (Part no. 31) for model-8
Parallel pin (Part no. 32) for model-8
Parallel pin (Part no. 33) for model-8
Hex head screw (Part no. 34) for model-8
Hex head screw (Part no. 35) for model-8
Hex head screw (Part no. 36) for model-8
circlip (Part no. 37) for model-8
circlip (Part no. 38) for model-8
circlip (Part no. 39) for model-8
circlip (Part no. 40) for model-8
circlip (Part no. 43) for model-8
out put shaft (Part no. 41) for model-8
Spacer ring (Part no. 42) for model-8
Spacer ring (Part no. 46) for model-8
Input Assembly
Output assembly
Model-9: AS45 F P100 B5 V1, Code: 16A000006012210001, i-15.83,Application : Agitators for Floculant Transfer Tanks (14 V - 13 A / B)
Casing with flange (Part no. 2) for model-9
Cover (Part no. 3) for model-9
Cap (Part no. 5) for model-9
Internal support (Part no. 4) for model-9
gasket (Part no. 6) for model-9
gasket (Part no. 7) for model-9
Extended 1st reduced pinion (Part no. 8) for model-9
Bored 1st reduced pinion (Part no. 9) for model-9
Gear wheel 1st reduction (Part no. 10) for model-9
Pinion 2nd reduction (Part no. 11) for model-9
Gear wheel, 2nd reduction (Part no. 12) for model-9
Bored input shaft (Part no. 13) for model-9
Extended input shaft (Part no. 14) for model-9
Oil seal (Part no. 15) for model-9
Oil seal (Part no. 16) for model-9
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-9
Bearing (Part no. 21) for model-9
Bearing (Part no. 22) for model-9
Key (Part no. 23) for model-9
Key (Part no. 24) for model-9
Key (Part no. 25) for model-9
Key (Part no. 26) for model-9
Key (Part no. 27) for model-9
Key (Part no. 28) for model-9
Level plug (Part no. 29) for model-9
Drain plug (Part no. 30) for model-9
Breather plug (Part no. 31) for model-9
Parallel pin (Part no. 32) for model-9
Parallel pin (Part no. 33) for model-9
Hex head screw (Part no. 34) for model-9
Hex head screw (Part no. 35) for model-9
Hex head screw (Part no. 36) for model-9
circlip (Part no. 37) for model-9
circlip (Part no. 38) for model-9
circlip (Part no. 39) for model-9
circlip (Part no. 40) for model-9
circlip (Part no. 43) for model-9
out put shaft (Part no. 41) for model-9
Spacer ring (Part no. 42) for model-9
Spacer ring (Part no. 46) for model-9
Input Assembly
Output assembly
Model-10: AS45 F P100 V1, Code: I11415320003, i-27.45, Application : i) Product Holding Tanks ( 8V - 2A/B) & ii) Strong liquor OHT tank
Casing with flange (Part no. 2) for model-10
Cover (Part no. 3) for model-10
Cap (Part no. 5) for model-10
Internal support (Part no. 4) for model-10
gasket (Part no. 6) for model-10
gasket (Part no. 7) for model-10
Extended 1st reduced pinion (Part no. 8) for model-10
Bored 1st reduced pinion (Part no. 9) for model-10
Gear wheel 1st reduction (Part no. 10) for model-10
Pinion 2nd reduction (Part no. 11) for model-10
Gear wheel, 2nd reduction (Part no. 12) for model-10
Bored input shaft (Part no. 13) for model-10
Extended input shaft (Part no. 14) for model-10
Oil seal (Part no. 15) for model-10
Oil seal (Part no. 16) for model-10
Gear head / box
In put assembly
Out put assembly
Bearing (Part no. 20) for model-10
Bearing (Part no. 21) for model-10
Bearing (Part no. 22) for model-10
Key (Part no. 23) for model-10
Key (Part no. 24) for model-10
Key (Part no. 25) for model-10
Key (Part no. 26) for model-10
Key (Part no. 27) for model-10
Key (Part no. 28) for model-10
Level plug (Part no. 29) for model-10
Drain plug (Part no. 30) for model-10
Breather plug (Part no. 31) for model-10
Parallel pin (Part no. 32) for model-10
Parallel pin (Part no. 33) for model-10
Hex head screw (Part no. 34) for model-10
Hex head screw (Part no. 35) for model-10
Hex head screw (Part no. 36) for model-10
circlip (Part no. 37) for model-10
circlip (Part no. 38) for model-10
circlip (Part no. 39) for model-10
circlip (Part no. 40) for model-10
circlip (Part no. 43) for model-10
out put shaft (Part no. 41) for model-10
Spacer ring (Part no. 42) for model-10
Spacer ring (Part no. 46) for model-10
Model-11: (Newly added model) AS55 FP 112, Code: I11825510001 / 2, Batch:5/10, V1, i:25:84 Application : i) Mother liquor tank agitator- CCR ii) seal pot
Casing with flange(part no.2) for model-11
Cover (part no.3)for model-11
Internal support (part no.4)for model-11
gasket (Part no.5)for model-11
gasket (part no.6 f)for model-11
Extended 1st reduced pinion (part no.7) for model-11
Bored 1st reduced pinion (part no.8) for model-11
Gear wheel 1st reduction (part no.9)for model-11
Gear wheel 2nd reduction (part no.10)for model-11
Pinion 3rd reduction (part no.11) for model-11
Gear wheel (part no.12)for model-11
Cap (part no.13)for model-11
Bored input shaft (part no.14) for model-11
Oil seal (part no.15) for model-11
Oil seal (part no.16) for model-11
Bearing (part no.17) for model-11
Bearing (part no.18) for model-11
Bearing (partno.19)for model-11
Bearing (part no.20)for model-11
Bearing (part no.21) for model-11
Bearing (part no.22) for model-11
Bearing (part no.23) for model-11
Bearing (part no.24)for model-11
Key (part no.25) for model-11
Key (part no.26) for model-11
Key (part no.27) for model-11
Key (part no.28) for model-11
Key (part no.29) for model-11
Level plug (part no.30) for model-11
Drain plug (part no.31) for model-11
Breather plug (part no.32) for model-11
Parallel pin (part no.33) for model-11
Parallel pin (part no.34) for model-11
Hex head screw (part no.35) for model-11
Hex head screw (part no.36) for model-11
Hex head screw (part no.37) for model-11
circlip (part no.38) for model-11
circlip (part no.41) for model-11
circlip (partno.42) for model-11
2 nd reduction pinioin (part no.45) for model-11
out put shaft (part no.47) for model-11
spacer ring (part no.48) for model-11
circlip (part no.58) for model-11
circlip (pat no.39) for odel-11
Extended input shaft (part no.50) for model-11
Key (part no.51) for model-11
Input Assembly
Output assembly
Model-12: (Newly added model) AS 35 FP 100 ; V1, I:15.37 Application : i) Agitators of floculant preparation at UCTL-3 Chemical house
Casing with flange (part no.2) for model-12
Casing with reducer flange (part no.2/1) for model-12
Cover (part no.3) for model-12
Internal support (part no.4) for model-12
Second recuction pinion (part no.5) for model-12
1 st recduction gear wheel (part no.6) for model-12
Extended 1st reduced pinion (part no.7) for model-12
Bored 1st reduced pinion (part no.8) for model-12
Bored input shaft (part no.9) for model-12
Extended input shaft (part no.10) for model-12
Gasket (part no.11) for model-12
Gasket (part no.12) for model-12
Oil seal (part no.19) for model-12
Oil seal (part no.20) for model-12
Bearing (part no.13) for model-12
Bearing (part no.14) for model-12
Bearing (part no.15) for model-12
Bearing (part no.16) for model-12
Bearing (part no.17) for model-12
Bearing (part no.18) for model-12
Key (part no.21) for model-12
Key (part no.22) for model-12
Key (part no.23) for model-12
Key (part no.25) for model-12
circlip (part no.26) for model-12
circlip (part no.27) for model-12
circlip (part no.28) for model-12
circlip (part no.29) for model-12
circlip (part no.48) for model-12
circlip (part no.49) for model-12
circlip (part no.31) for model-12
Parallel pin (part no.32) for model-12
Parallel pin (part no.33) for model-12
Washer (part no.34) for model-12
Drain plug (part no.29) for model-12
Hex head screw (part no.35) for model-12
Hex head screw (part no.36) for momdel-12
Hex head screw (part no.37) for model-12
stud bolts (part no.36)for model-12
Hexagonal nut (part no.37) for model-12
Spacer ring (part no.38) for model-12
Key (part no.24) for model-12
circlip (part no.30) for model-12
Out put shaft (part no.44) for model-12
2nd reduction gear wheel (Part no.45) for model-12
Spacr ring (part no.46) for model-2
Cap (part no.47) for model-12
Input Assembly
Otput Assembly
Please Enable Macros to View BoQ information
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.28 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.06 MB
Annexure7.pdf
Tender Documents • 0.38 MB
TenderOpeningSchedule.pdf
Tender Documents • 0.04 MB
Annexure4.pdf
Tender Documents • 0.42 MB
Annexure3.pdf
Tender Documents • 0.27 MB
Text.pdf
Tender Documents • 0.05 MB
Annexure2.pdf
Tender Documents • 0.93 MB
Annexure5.pdf
Tender Documents • 0.43 MB
Annexure9.pdf
Tender Documents • 0.43 MB
Annexure-8.pdf
Tender Documents • 8.73 MB
Annexure6.pdf
Tender Documents • 0.49 MB
Annexure1.pdf
Tender Documents • 0.44 MB
BOQ_306972.xls
BOQ • 0.92 MB
Download all tender documents and submit your bid