Renovation and Repairing to Various department building at L.D.C.E, Ahmedabad. (Providing and Fixing Faculty cabin, table, Chairs, Computer table, wall mounted cup board, partition, Window, Door, False ceiling, Flooring work, Color work and other misc. Work)

Name of Work :- Renovation and Repairing to Various department building at L.D.C.E,

Ahmedabad. (Providing and Fixing Faculty cabin, table, Chairs, Computer table,

wall mounted cup board, partition, Window, Door, False ceiling, Flooring work,

Color work and other misc. Work)

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

1 13.00 Dismentling doors, windows, 187.71 Rupees One No

ventilators etc. (wood or steel) Hundred

shutters including chowkhats Eighty

architraves, holdfasts and other Seven And

attachment etc. complete and Paise

stacking them within all lead and Seventy One

lift.(i) Not Exceeding 3 Sq.M. in Only

2 383.00 Dismentling tiled of stone floors laid 47.72 Rupees Smt

in mortar including stacking of Forty Seven

serviceable materilas and disposal And Paise

of unserviceable materials with all Seventy Two

lead and lift. Only

3 128.00 Dismentaling Alluminium Partition 30.30 Rupees Smt

in ceiling or partition walls including Thirty And

trellies work including frames Paise Thirty

,stacking of serviceable materilas Only

and disposal of unserviceable

materials with all lead and lift.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

4 120.00 Removing and scraping of old 19.57 Rupees Smt

deteriorated plaster of any Nineteen

thickness from wall including And Paise

stacking of serviceable material Fifty Seven

and disposal of unserviceable from Only

site of work with all lead and lift

5 2853.00 Removing dry or oil bound 11.30 Rupees Smt

distemper by a washing and Eleven And

scraping and sand papering the Paise Thirty

wall surface smooth including Only

necessary repairs to scratches

6 120.00 Providing 15mm thick cement 176.58 Rupees One Smt

plaster in single coat on Rough Hundred

(Similar)side of single or half brick Seventy Six

walls for interior plastering upto And Paise

floor two level and finished even Fifty Eight

and smooth in (i) Cement mortar Only

1:3 (1-cement:3-sand)

7 383.00 Providing and laying 24" x 24" 1189.88 Rupees One Smt

Vitrified 8 mm thick tile flooring Thousand

over 20 mm (average) base of One

cement mortar 1:6 (1 cement : 6 Hundred

coarse sand) or by adhesive Eighty Nine

material including dismentalling of And Paise

existing flooring and jointed with Eighty Eight

colour cement slurry including Only

finished with flush pointing &

cleaning the surface etc.complete

For light shade

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

8 46.00 Providing and laying Vitrified tiles 1141.45 Rupees One Smt

8to10mm thick, 24'' x24'' in skrting Thousand

risers of steps and dedo on 10mm One

thick cement plaster 1:3 (1-cement Hundred

: 3 coarse sand) and jointed with Forty One

white cement slurry And Paise

9 2852.00 Applying two coats of Birla (white 40.59 Rupees Smt

cement based) or Asian (acrylic Forty And

lapy- putty) or equivalent & two Paise Fifty

coats of primer of approved brand Nine Only

and manufacture on new wall

surface to give an even shade

including thoroughly brushing the

surface free from mortar dropping

and other foreign matter and sand

papered smooth.

10 2185.00 Wall painting (two coats) with 79.22 Rupees Smt

plastic emulsion paint of approved Seventy

brand and manufacture on Nine And

undecorated wall surface to give an Paise

even shade including throughly Twenty Two

brushing the surface free from Only

mortar droppings and other foreign

matter and sand papered smooth.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

11 668.00 Wall painting (two coats) with 84.64 Rupees Smt

plastic emulsion paint of approved Eighty Four

brand and manufacture on ceilling And Paise

and sloping roof to give an even Sixty Four

shade including throughly brushing Only

the surface free from mortar

droppings and other foreign matter

and sand papered smooth.

12 54.00 Painting two coat (including 89.58 Rupees Smt

Priming coat) on previously Eighty Nine

painted steel & other metal And Paise

sufaces with synthetic enamel Fifty Eight

paint, brushing to give an even Only

shade incl. cleaning the surface of

all dirt dust & other foeign matter.

13 480.00 Providing and fixing pre-cast 686.90 Rupees Six Smt

Rubber Dye / steel Dye inter Hundred

locking concrete block 60mm thick Eighty Six

with grade of concrete M300 And Paise

pnumatic compressed / vibrated Ninety Only

mechanically and as per approved

design Confirming to IS 15658 :

2006 including 35 mm Sand layer

for levelling and filling the joint with

sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

14 810.00 Carring out plinth treatment to post 105.95 Rupees One Smt

construction/existing structure by Hundred

spraying chemical solution Five And

fortermite control treatment Paise Ninety

including labour and material Five Only

consistmentwith I.S.I

specification.Using Chlordene and

Chiorpurfiles 20 EC. As

Per6131_paret-II Consentration

Weight one percent

isrecommended i.e one litre 20 EC

chemical emulsionwith19 liter

give1%concrentration inclusive of

one litre chemical emulsion

appication at therateof 5 Litre

chemical / Sqm of surface

isrecommended as per I.S.

15 20.00 Engaging labour to Shifting of 100.30 Rupees One No

loose furniture items including Hundred

Table, chair, metal storage, rack, And Paise

cupboard etc from Library. building Thirty Only

(All floor) to LDCE campus and

Rate to be inclusive of arranging

furniture as directed and making

good all complete as directed by

Engineer-in-charge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

16 14.40 Providing and fixing window having 1713.70 Rupees One Smt

extruded aluminum Colour Thousand

anodized section frame main outer Seven

size 63.50 x 38.10 x 1.95mm, @Wt Hundred

1.094 Kg/Rmt,horizontal two track Thirteen And

member size 61.85 mm x 31.75 Paise

mm x 1.20mm @ wt.of Seventy

0.695Kg/mt,vertical member of size Only

wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size

0.456Kg/mt,vertical member of size

0.456Kg/mt,@Wt. 0.457Kg/mt with

5mm thick transparent bronze

colour tinted float glass with

powder coated aluminum fittings

and fixtures and transparent silicon

sealant glass fixing to frame as per

details etc complete for window.

17 5.63 Providing and fixing standared 1175.56 Rupees One Smt

extruded of alluminium section of Thousand

size 63mm x 38.10mm x 1.2mm ( One

Wt. 0.643 Kg/mt) with colour Hundred

anodized alluminium frame for Seventy Five

ventilation with 5 mm thick frosted And Paise

glass as details. Fifty Six

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

18 25.00 Repairing Existing Alluminum 1066.99 Rupees One Smt

extruded Fully / Partly glazed Thousand

sliding windows by replacing of old Sixty Six

rusted rollers, replacing mosquito And Paise

net, glass, hardware as per Ninety Nine

requirement & making good & Only

refixing shutters in position as

directed by Engineer In Charge.

19 40.00 Providing and fixing 19 mm thick 645.44 Rupees Six Smt

commercial plywood in cupboard Hundred

shutter/in table side top bottom with Forty Five

beading patti, necessary fixtures And Paise

and fastenings as per instruction by Forty Four

engineer in charge. Only

20 66.00 Providing and fixing laminated 243.32 Rupees Two Smt

sheet 0.8 mm thick out side on Hundred

existing cupboard/ table with Forty Three

necessary fevicol and nails as And Paise

directed. Thirty Two

21 30.00 Providing and fixing drawer lock in 151.00 Rupees One No

cupboard shutter/Table drawer of Hundred

approved quality with necessary Fifty One

fittings etc. complete. Only

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

22 60.00 Providing and fixing C. P. brass / 127.77 Rupees One No

powder coated S. S. handle 2" to Hundred

6" in cupboard shutter drawer with Twenty

necessay fittings etc. complete. Seven And

23 10.00 Providing and fixing Door closers 570.41 Rupees Five No

(Heavy type of 765 number) Hundred

Hardwire or Everite Prabhat or Seventy And

Equivalent. with necessary screws Paise Forty

etc. complete. One Only

24 1527.00 Providing modular partition full or 2861.23 Rupees Two Smt

low with 1.2m or more with whole Thousand

frame structure of Aluminium Eight

extruded alloy sections with all Hundred

sections powder coated (50 Sixty One

micron) having overall partition And Paise

thickness 80 mm (double skin) Twenty

flush on both sides using 12mm Three Only

prelam MDF board with no

screwing or gluing etc. visible as

specifed in specification sheet. etc.

complete or as directed by

engineer in charge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

25 57.60 Providing modular partition full 4084.75 Rupees Four Smt

height with whole frame structure Thousand

of powder coated Aluminium Eighty Four

extruded alloy sections with Twin And Paise

layers of Glass glued with Seventy Five

Aluminum glass section by 3M Only

taps.Horizontal venetian blinds with

swivelling mechanism are provided

between two glasses with out side

control as specifed in specification

sheet. etc. complete or as directed

by engineer in charge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

26 12.00 Providing and fixing single shutter 4825.06 Rupees Four Smt

door having powder coated Thousand

aluminum section frame, equivalent Eight

to jindal door section no.19633, Hundred

weight nos less than 2 kg/mt with Twenty Five

non teak wooden inserts for And Paise

durable grip of door hinges - Frame Six Only

86mm X 49mm, and 30 mm thick

solid core wooden flush shutter

confirming to IS-2202 and ISI

approved manufacturer and

coverded with 0.8mm thick

laminates on each shutter both

sides with 6mm thick polished teak

wood beading on periphery and

s.s. handles both side and s.s

fixtures and locking arangement on

each shutter and fixed with 4 nos.

150mm hIgh s.s hinges and other

S.S. accessories like stopper,

aldrop rubber data both side where

complete of any size any

pattern/color/texture on all floors

with all lead and lift as per direction

and approval of engineer incharge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

27 84.00 Providing Cabin Doors made from 4979.61 Rupees Four Smt

30mm Board with wood filled core Thousand

and 3 mm MDF sturdy and Nine

matching with partitions having Hundred

overall size as directed by Architect Seventy

,view glass and hardware like Nine And

handles, door closer and dead lock Paise Sixty

etc as specifed in specification One Only

sheet. etc. complete or as directed

by engineer in charge.

28 72.00 Providing and fixing Roller blinds of 1515.00 Rupees One Smt

Imported Fabrics as per approved Thousand

shade and matching head rail with Five

all accessories , material & labour Hundred

etc. complete. Material : Roller Fifteen Only

blinds shall be of best approved

quality the colour, design and

shade shall rail, fitting device shall

be in matching shade and colour

and of best approved quality.

Workmanship:- The head rail

shall be fixed at top of window as

directed. It shall be fixed with be

got approved from Engineer-in-

charge before commencement of

the work. Necessary head nails,

screws, by draining holes in wall or

R.C.C. surface. Necessary wooden

plug shall be used before fixing.

The vertical blind shall be current

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

The bond rails shall be fixed at top

in such a way that horizontal

movement of blinds shall be

controlled with the string movement

at the ends. Movement around

Horizontal axis shall also be

controlled at one end. It shall be as

per required height. The operation

of Roller blinds shall be smooth.

The whole work is blinds shall be

smooth. The whole works is to be

done up to full satisfaction of

Engineer-in-charge.Necessary

cutting of blinds for A.C. machine

shall be done without calming any

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

29 43.00 Providing and supplying Executive 12207.47 Rupees No

High back revolving chair made out Twelve

of MS powder coated steel tube Thousand

frame base, high density molded Two

PU with fabric upholstery in seat Hundred

and ergonomically contoured PP Seven And

designed backrest of high density Paise Forty

PU with contrasting or matching Seven Only

fabric upholstery with fixed type PU

padded arm rest with heavy duty

castors under structure of chair and

Polyurethane armrests confirming

to IS standard and fabric as per

sample approved of Make: ERGO,

BMC, ASHIRVAD, NILKAMAL,

BLUEBELL, HOF OR equivalent

brand by the Architect / Engineer in

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

30 110.00 Providing and supplying Medium 7304.12 Rupees No

back / computer revolving chair Seven

made out of MS powder coated Thousand

steel tube frame base, high density Three

molded PU with fabric upholstery in Hundred

seat and ergonomically contoured Four And

PP designed backrest of high Paise

density PU with contrasting or Twelve Only

matching fabric upholstery with

fixed type PU padded arm rest with

heavy duty castors under structure

of chair and Polyurethane armrests

confirming to IS standard and

fabric as per sample approved of

Make: ERGO, BMC, ASHIRVAD,

NILKAMAL, BLUEBELL, HOF OR

equivalent brand by the Architect /

Engineer in Charge.

31 114.00 Providing & Fixing post laminated 3625.58 Rupees Smt

Work Top with mounter and made Three

from 36mm MDF board with overall Thousand

size 1300/1500/1800 /2100 X 750 - Six Hundred

1050 mm or of any size as per Twenty Five

requirements and directed by And Paise

Engineer in charge, With 2mm Fifty Eight

edge bands. Only

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

32 81.00 Providing & Fixing Gable end to 1628.20 Rupees One Smt

support top having overall size Thousand

(1050-800-750-600) X 710 X 25mm Six Hundred

or of any size as made from 25mm Twenty Eight

MDF both side pre laminated And Paise

boards with 2mm edge bands.as Twenty Only

per requirements and directed by

Engineer in charge.

33 118.00 Providing and fixing modesty panel 975.21 Rupees Nine Rmt

of 600 mm high connecting Gable Hundred

end and partition made from 18mm Seventy Five

BSL boards. etc. complete or as And Paise

directed by engineer in charge. Twenty One

34 8.00 Providing & Fixing side screen of 2823.22 Rupees Two Smt

size 0.6 x 0.4 m. or as per Thousand

instruction of engineer in charge Eight

made from 12mm Glass mounted Hundred

through D brackets. Twenty

35 34.00 Providing & fixing pull out under 909.00 Rupees Nine No

desk adjustable movable of size Hundred

510 mm x 240 mm keyboard trays Nine Only

and CPU trolley of size 890 mm x

190 mm x 267 mm as per

instruction given by Engineer in

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

36 5.00 Providing and fixing Wall Mounted 7968.48 Rupees Smt

Cup board using 18mm thick Seven

waterproof Plywood,Teak Wood Thousand

Batten Patti (25x12)mm and teak Nine

wood framing and 1 mm thick Hundred

different colour laminate sheet with Sixty Eight

6mm thick sliding glass shutters And Paise

with channels runners lock glass Forty Eight

shelves with brackets including Only

fixing fixturesin labour etc.

complete as per design approved

by Engineer in charge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

37 24.00 Providing and fixing a complete 3858.20 Rupees Smt

aluminium 4-track sliding door Three

system for a clear structural Thousand

opening of 8.0 m (W) × 2.75 m (H), Eight

including a separate fixed panel Hundred

frame at the top measuring 8.0 m Fifty Eight

(W) × 0.6 m (H). The system And Paise

comprises 8 sliding shutters Twenty Only

opening on both sides, each 1.0 m

wide, fabricated using standard

Jindal aluminium sections—outer

frame: Top & Side: JAL-20835

(116×31.3mm), Bottom: JAL-20836

(116×31.75mm); shutter sections:

Top/Side: JAL-20553, Bottom: JAL-

20859; vertical interlocks: JAL-

20555; and glazing bead: JAL-

20979. Shutters shall be infilled

with 4mm thick hardboard panels,

secured with EPDM gaskets and

aluminium beadings,

and mounted with high-

performance sliding hardware

including rollers, locks, handles,

and stoppers. All aluminium

sections shall be powder coated

(approx. 8.5 kg/sqm) to achieve a

uniform architectural finish. The

work shall be completed in all

respects including design, supply,

fabrication, powder coating,

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

installation, and all necessary

accessories, ensuring smooth

operability, long-term durability,

and a high-quality aesthetic finish,

all as per approved drawings and

site conditions under the

supervision of the Engineer-in-

38 435.00 Providing and fixing eco-friendly 1648.96 Rupees One Smt

light weight calcium silicate false Thousand

ceiling tiles having Tegular edge & Six Hundred

15mm Thick Densified edges on Forty Eight

the Tile Periphery for Extra And Paise

Strength.The Light weight calcium Ninety Six

silicate ceiling tiles shall have,light Only

reflection 85% non-combustible as

per B.S.476 part IV,100% humidity

resistance and also having thermal

conductivity 0.043°w/mKC. for the

best thermal Insulation.TheLight

weight calcium Silicate tile shall be

of approved texture Finefissured /

Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC

value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on

true horizontal level suspended

interlocking metal grid of hot

dipped galvanized steel sections

(galvanizing @120 grams per sqm

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

including both side) consisting of

main„T?runner suitably space

adatjoints to get required length

and size of 24 X 38 mm made from

0.30 mm thick (minimum)

sheet,1200 mm centre to centre,

and cross„T?ofsize 24 X 28 mm

made out of 0.33mm (Minimum)

sheet spaced 1200 mm along

spaced between main„T?at

mmcentre to centret of or magrid

of1200X600 mm and secondary

cross?T?of length 600 mm and

size24x28 mm madeof 0.30 mm

thick (Minimum) sheet

39 42.00 Providing and fixing Drawer Unit 3350.58 Rupees No

made from 18mm both side pre Three

laminated MDF boards of size 600 Thousand

X 400 X 500mm with one drawer Three

and one locker. etc. complete or as Hundred

directed by engineer in charge. Fifty And

40 34.00 Providing and fixing Side rack 6953.71 Rupees Six Smt

made from 18mm both side pre Thousand

laminated MDF boards having size Nine

1200 X 710 X 450 mm or 900 X Hundred

710 X 450 mm with 2 drawers and Fifty Three

sliding shutters and Back storage And Paise

units with 710mm height including Seventy One

top. etc. complete or as directed by Only

engineer in charge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

41 13.00 Providing and laying Polished 578.79 Rupees Five Smt

25mm thick kota stone in Platform Hundred

Fitting on wall/Floor including Seventy

making grooves in the wall /Floor Eight And

and fitting with cementing Paise

/adhesives materials etc. Seventy

completed as per directed by Nine Only

engineer in charge.

Total : (Civil) A :

42 187.00 Point wiring for Light / Bell with 2- 449.45 Rupees Four Ea

1.5 sq.mm & earth wire of 1.5 Hundred

sq.mm (Green) both are of ISI Forty Nine

marked 1.1 KV grade FRLS PVC And Paise

insulated multi strand copper wires Forty Five

up to 10 mtr length , in below type Only

of pipe erected with 6A Modular

type switch / bell push &

accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate

modules erected on / in wall /

ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose

/ H.D.Connector as directed. (a)

with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete. Cat. III

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

43 67.00 Point wiring for FAN with 2-1.5 638.32 Rupees Six Ea

sq.mm & earth wire of 1.5 sq.mm Hundred

(Green) both are of .ISI marked 1.1 Thirty Eight

KV Grade FRLS PVC insulated And Paise

multi strand copper wires up to 10 Thirty Two

mtr length, in below type of pipe Only

erected with 6A Modular type

switch and hum free EME step

type electronic fan regulator

mounted and accessories with

earth continuity of following type

erected on PVC / Metallic/Wooden

box, single mounting base frame

textured/metallic/white front plate

modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose /

H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete. Cat. III

44 Providing following type of Modular Rupees Nil

Type Accessories mounted with

PVC / metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

, modules erected with necessary

connections as per site situation

directed by Engineer In charge.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

610.00 (1)One No. SP 6 Amp. Cat.III 151.50 Rupees One Ea

610.00 (2) One No 5 pin plug, Cat.III 151.50 Rupees One Ea

40.00 (8) Computer RJ-45 socket , 160.59 Rupees One Ea

Cat.III Hundred

170.00 (9) 16 Amp. SP one way switch , 180.79 Rupees One Ea

Cat.III Hundred

170.00 (10) 6/16Amp. Universal socket , 199.98 Rupees One Ea

Cat.III Hundred

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

45 770.00 Providing and erecting ISI mark 24.24 Rupees Mtr

Medium class RIGID PVC PIPES Twenty Four

of following size complete to be And Paise

erected on/in wall or ceiling Twenty Four

erected with necessary PVC fittings Only

& Junction boxes fixed with

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed (a)20 mm

46 30.00 Providing & erecting PVC 17.17 Rupees Mtr

Corrugated Flexible Conduit with Seventeen

required nos. of coupling, PVC And Paise

bushes, Check-nuts etc. complete Seventeen

of following sizes.(1) 20 mm Only

47 150.00 Supplying and laying UPVC cable 188.87 Rupees One Mtr

trunking system comprising Hundred

unplasticised polyvinyl, chloride Eighty Eight

rigid material with ignition free and And Paise

flame proof confirming BS with Eighty

necessary end caps Internal and Seven Only

external bend, flat bends, coupler,

tee etc..All necessary accessories

and measuring of following sizes

(3) 50 mm x 50 mm trunking

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

48 1600.00 Providing and erecting Mains with 82.82 Rupees Mtr

1.1 KV grade FRLS PVC insulated Eighty Two

ISI marked stranded Copper And Paise

conductor wire in following type of Eighty Two

pipe to be erected concealed in Only

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of

following size (A) With medium

class Rigid PVC pipe and

accessories.(b) 2 wire 2.5 sq. mm

49 730.00 Providing and erecting Mains with 112.11 Rupees One Mtr

1.1 KV grade FRLS PVC insulated Hundred

ISI marked stranded Copper Twelve And

conductor wire in following type of Paise Eleven

pipe to be erected in / on wall / Only

ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated

stranded wire of green colour for

earth continuity of following size.

(A) with medium class Rigid PVC

pipe and accessories. (a) 2 wire

100.00 (h) 4 wire 6 sq. mm 260.58 Rupees Two Mtr

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

50 900.00 Supplying & erecting approved 47.47Rupees Mtr

make LAN cable of following size in Forty Seven

existing pipe as per direction [C] And Paise

CAT - 6 Forty Seven

51 2.00 Providing and erecting Sheet Steel 2913.85 Rupees Two Ea

powder coated MCB distribution Thousand

board - flush / surface mounted Nine

fitted with busbar, neutral link, Hundred

earth bar and DIN rail, Conforms to Thirteen And

IS 8623-1 & 3, IEC 61439-1 & 3 Paise Eighty

without MCB to house appropriate Five Only

nos. of MCBs.(The DBs should be

used of same company of MCB to

be used) suitable for (B) three

phase incoming and single phase

horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel

double door (ii)6 way

52 36.00 Providing and erecting Miniature 112.11 Rupees One Ea

circuit breaker single pole 6A to Hundred

25A suitable to operate on 240 V Twelve And

A.C. system and having breaking Paise Eleven

capacity 10 KA to be erected in Only

existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

53 30.00 Providing & erecting 415V MCB 638.32 Rupees Six Ea

Four Pole Switch for Lighting Load Hundred

(B curve) having 10KA breaking Thirty Eight

capacity & confirms to IS :8828 in And Paise

existing box having following Thirty Two

capacity (b)40 Amp. Cat.III Only

54 46.00 Providing and erecting Approved 1969.50 Rupees One Ea

make RCCBs conforming to IS: Thousand

12640 and having sensitivity of 30 Nine

mA and Short Circuit withstand Hundred

capacity of 10 KA and suitable for Sixty Nine

operation on single phase 240 And Paise

V,50Hz. having characteristic of Fifty Only

quick action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max.

rating erected as directed. (i)

Amps.DP Cat. III

55 2.00 Providing and erecting Approved 4983.34 Rupees Four Ea

make Earth fault Relay suitable to Thousand

mount with inter connection Nine

suitable to following size of Hundred

moulded case circuit breaker Eighty Three

having CT ratio & MCCB rating as And Paise

following along with shunt trip 220V Thirty Four

AC. with all internal connections & Only

complete erected in existing

M.S.housing.. (2) 125 A -200 A

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

56 5.00 Replacing old & u/s by providing 6173.12 Rupees Six Ea

and erecting Approved make Four Thousand

pole moulded case circuit breaker One

having breaking capacity ICU of 25 Hundred

KA. at 415 V,having normal current Seventy

rating up to 25 A to 100A. with Three And

Fixed thermal & magnetic release Paise

suitable to work on A.C. supply 50 Twelve Only

c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S.

housing, ICS=100% of ICU only

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

57 307.00 Supplying and erecting LED indoor 373.70 Rupees Ea

fittings with LEDs of wattage 0.2 Three

Watt to 0.5 Watt assembled on Hundred

single MCPCB, with housing used Seventy

as a heat sink shall be made of Three And

thick sheet Steel conforming to IS: Paise

513/CRCA/ aluminium die cast Seventy

powder coated and high U.V. & Only

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than

0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy>

lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge may

select any wattage capacity

between the ranges shown.) (A)

Tube Light with integral driver (v)

(iv) 22-24 Watts, Surge - 2KV,IP-

20, conventional 4 feet, Cat-lll

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

58 80.00 Supplying and erecting LED indoor 758.51 Rupees Ea

fittings with LEDs of wattage 0.2 Seven

Watt to 0.5 Watt assembled on Hundred

single MCPCB, with housing used Fifty Eight

as a heat sink shall be made of And Paise

thick sheet Steel conforming to IS: Fifty One

513/CRCA/aluminium pressure die Only

cast powder coated and high U.V.

& corrosion resistance with

diffuser housed in aluminium

casted body with company

mark/name 160V to 270V,Power

Factor more than 0.95, THD <

%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 % (

fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.) (A)

Square/ Circular shaped

Surface/Recessed Mount

Downlight with provision for spring

loaded mounting clips

complete.IP20, (iv) 22-24 watts,

Surge-2 KV, Cat-lll

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

59 167.00 Supply, Installation, Testing and 2629.03 Rupees Two Ea

Commissioning of suitable sweep, Thousand

BEE 5 Star rated, Ceiling fan with Six Hundred

Brush Less Direct Current (BLDC) Twenty Nine

permanent ferrite magnet Motor, And Paise

class of insulation: B, Rust free 3 Three Only

nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing

provision, copper winding, Power

factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air

delivery minimum 215 CMM,

RPM,230v (tolerance as per IS :

374-2019), THD < 10%, compitible

with electronic regulator unit for

Speed Control and all remaining

accessories including safety pin,

nut bolts, washers, temperature

rise = 75 degree C (Max.), suitable

for 140 to 285 Voltage and rectifier

circuit with surge, over current

and overload protection , 50 Hz,

Single phase AC Supply, earthing

etc. Complete as required.[ Make

shall be approved by Engineer in

Charge] (A) 1200 mm Sweep (48")

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

60 40.00 Supplying and erecting approved 2534.09 Rupees Two Ea

make oscillating type bracket fan Thousand

A.C. 23OV. 50cy/s 400/450 mm Five

sweep wall mounted with height Hundred

adjustment and rotary tilting device Thirty Four

complete with guard, flexible Core And Paise

plug top complete erected with lead Nine Only

wires as directed.Cat.II

61 290.00 Replacing old & u/s by Supplying 46.46 Rupees Mtr

and erecting Flexible PVC Forty Six

insulated multi strand multi core 1.1 And Paise

kv grade ISI marked copper wires Forty Six

of following size to be erected as Only

directed.(e) 1.50 Sq.mm 3 core

round PVC sheathed

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

62 43.00 Replacing old & u/s by Supplying 4997.48 Rupees Four Ea

and erecting LED street light / Thousand

Flood light fittings with High power Nine

White LEDs wattage of 3 Watt and Hundred

above assembled on single Ninety

MCPCB, efficiency more than 130 Seven And

lm/w and corrosion free High Paise Forty

pressure die cast aluminum Eight Only

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy>

lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 &

LM-80 certificates)

(NOTE: Below description have

shown ranges of Wattage capacity

of LED fittings.The Engineer

incharge may select any wattage

capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line

supply with over-voltage protection.

(ii) above 48 to 60 Watts Cat-lll

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

7.00 (B) Flood Light (IP-65), Surge 7266.95 Rupees Ea

protection -4KV integral and ,Light Seven

must have 440VAC line supply with Thousand

over-voltage protection. (iv) above Two

90 to 120 watts Cat-lll Hundred

4.00 (C) Post Top Lantern LED fitting 4819.72 Rupees Four Ea

comprises of finish cast aluminum Thousand

spigot and spun aluminum canopy Eight

fixed with opal polycarbonate, pipe Hundred

arrangement for vertical mounting Nineteen

driver and accessories wired upto And Paise

terminal block.IP 65(ii)32-40WCat- Seventy Two

63 30.00 Repairing of existing indoor LED 886.78 Rupees Ea

light fixture(flood light/street Eight

light/bollard lights/decorative wall Hundred

lights/landscape light etc as per Eighty Six

sample )by suitable driver 4 And Paise

kv,IP65 according to LED PCB as Seventy

per requirement of following rating Eight Only

wattage capacity .(G) 50-80 watt

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

3.00 (H) 90-100 watt capacity 1344.31 Rupees One Ea

64 60.00 Replacing old & u/s by providing 270.68 Rupees Two Ea

and erecting Miniature circuit Hundred

breaker single pole 0.5A to 2A Seventy And

system and having breaking Paise Sixty

capacity 10 KA to be erected in Eight Only

existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

65 400.00 Replacing old & u/s by Providing 126.25 Rupees One Mtr

and erecting XLPE (IS:7098)(I)-88 Hundred

ISI armoured cable multistrand / Twenty Six

Solid Aluminium conductor for 1.1 And Paise

KV. to be laid on wall with Twenty Five

necessary clamps or in existing Only

trench / pipe of following size of

cables(B) 4 core 6 Sq. mm

175.00 (C) 4 core 10 Sq. mm 140.39 Rupees One Mtr

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

66 245.00 Making trench in soft soil of 55.55 Rupees Fifty Mtr

suitable width of 90 cm deep for Five And

laying cable or locating the fault all Paise Fifty

over the run and back filling the Five Only

same and making the surface as

67 75.00 Making trench in Hard Murrum / 74.74 Rupees Mtr

Tar Road of suitable width of 90 cm Seventy

or required depth for laying any Four And

size of cable or locating the fault Paise

all over the run and back filling the Seventy

same and making the surface as Four Only

68 345.00 Providing & laying approved make 62.62 Rupees Mtr

Double walled corrugated pipes Sixty Two

(DWC) of polyethylene(conforming And Paise

to IS 14930 II )with necessary Sixty Two

connecting accessories of same Only

material at required depth in

existing trench for laying of cable.

below ground / road surface for

enclosing cable (A)50 mm outer dia

69 20.00 Providing and, fixing heavy duty 38.38 Rupees Ea

flange type brass cable gland with Thirty Eight

rubber ring for PVC insulated And Paise

armoured cable complete with out Thirty Eight

going tails, insulating tape etc for Only

following size of cables.(B) 2 to

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

2.00 (C) 2 to 4 core 10 Sq. mm 38.38 Rupees Ea

70 80.00 Replacing old & u/s by Solder less 6.06 Rupees Six Ea

crimping type Aluminium lugs And Paise

conforming to IS suitable for cable Six Only

of following size evenly crimped

with high pressure tool &

connected to switchgear terminals

with brass/cadmium plated nut

bolts in an approved manner. (A)

8.00 (B) 10 Sq.mm 13.13Rupees Ea

71 6.00 Replacing old & u/s by Supplying & 4440.97 Rupees Four Ea

erecting Galvanized M.S pipe post Thousand

“B” class 88.9 mm O.D 6 mtr. Long Four

duly painted with two coats of Hundred

aluminium paint complete with Forty And

metallic base- plate of 300 mm x Paise Ninety

300 mm x 4mm thick for using as Seven Only

a compound light pole with approx.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

72 6.00 Providing 1:2:4 cement concrete 809.01 Rupees Ea

foundation & 70 % PCC from Eight

bottom including excavation for the Hundred

pole of size 45 x 45 x 100 cm. Nine And

Deep in below ground level with Paise One

plinth of 45 cm x 45 cm (or 45 cm Only

dia x 45 cm) high upper ground

level with necessary curing and

finishing in approved manner.( for

73 22.00 Replacing old & u/s by Supplying & 898.90 Rupees Ea

erecting approved make SMC Eight

press moulded composite FRP. Hundred

loop-in, loop-out approx. 2mm thick Ninety Eight

box complete with Bakelite And Paise

connector strip 5way (3P+N+E), Ninety Only

DIN rail for mounting mob &

hinged doors as per requirement

having locking arrangements with

mounting clamp with nuts, bolts &

washers suitable for erection on

pole with cable clamps& earth bolt

of following size of box.(A) 300mm

x 200mm x 100mm [deep]

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

74 4.00 Replacing old & u/s by Supplying 450.46 Rupees Four Ea

and erecting Street light pole Hundred

bracket comprising main B Class Fifty And

MS pipe of 4.2 cm/require outside Paise Forty

dia. complete with suitable B Class Six Only

M.S. sleeve tubing of approx.

45cms.length and suitable for

76.5mm /80mm /require size of

pole top having nuts and bolts for

fixing the brackets and having

spread of 0.5 mtr. Length with

deg.with vertical plane and suitable

welded stiffener reducer and nipple

with check nut complete painted

with one coat.of Red oxide / PU

base primer and two coats of

Aluminium / PU paint. paint with

following nos of arms. [A] Single

Arm bracket 0.5 Mtr

2.00 [B] Double Arm Bracket 0.5 Mtr 569.64 Rupees Five Ea

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

75 2.00 Replacing old & u/s by Supplying & 3168.37 Rupees Mtr.

erecting approved make Digital Three

time switch having lithium cell 6 Thousand

years operative and operate battery One

backup 1 channel day clock with 14 Hundred

memory programme, suitable to Sixty Eight

operate on 240V + 5%, 16A with, And Paise

floating contacts Minimum Thirty Seven

switching setup time 1 minimum & Only

LCD display. Also comprised

permanent ON/OFF switching.

Programming switches & housed in

fire proof thermoplastic enclosure &

transparent cover erected as

required with necessary connection

erected as directed.

76 2.00 Replacing old & u/s by Supplying & 2782.55 Rupees Two Mtr.

erecting power contactor ,AC3 duty Thousand

for time switch complete erected as Seven

per direction Cat III (D) 4 pole 440V Hundred

40 Amp. Eighty Two

Total : (Electrical) B :

Total : (Civil+Electrical) A+B=C :

Rs. In words : Rupees One Crore Twenty Lakh(s) Fifty Eight Thousand Eight Hundred Fifty

Seven And Paise Thirty Nine Only

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

I / We am / willing to carry out the work at __________ above / below __________ percentage

(should be written in figures and words) above / below the estimated amount mentioned above.

Amount of my/our tender works out as under.

Estimated Amount put to Estimated Amount put to

Deduct _________ % Below. Add _________ % Above.

Note : The comparision of Lowest Bidder will be made as under :

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated inS.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the costof difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5. Credit of Rs. 46,880.33 Shall be recovered from the payable bills towards cost of dismental

Dated Signature of Executive Engineer

the Contractor Navrangpura (R & B) Division