Installation of 150 HP clear water pump (newly procured) at 10 MLD Kotilingalapeta in Rajamahendravaram Municipal Corporation.

Commissioning of 180 HP Clear Water pumpset at 10 MLD Kotilingalapeta including pedestal concrete with alignment and balancing as required, including crane charges, all cost and conveyance and labour charges, including all incidental and operational cost as directed by the Departmental Authorities.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. For 150mm Sluice Valve PH 1.6Mpa

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. For 200mm Sluice Valve PH 1.6Mpa

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. For 200mm dia PH 1.6MPa

Labour charges for lowering and keeping in position of 150mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS.

Labour charges for lowering and keeping in position of 200mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS.

Jointing 150mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S.

Jointing 200mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S.

Manufacture, supply, delivery and fixing of required M.S. fabricated pipe and specials (Bends, Tees and Reducers etc.) using 8mm thick M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials conveyance to work spot and all labour charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of 150mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 200mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Commissioning of 180 HP Clear Water pumpset at 10 MLD Kotilingalapeta including pedestal concrete with alignment and balancing as required, including crane charges, all cost and conveyance and labour charges, including all incidental and operational cost as directed by the Departmental Authorities.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. For 150mm Sluice Valve PH 1.6MPa

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation. For 200mm Sluice Valve PH 1.6MPa

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. For 200mm dia PH 1.6MPa

Labour charges for lowering and keeping in position of 150mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS.

Labour charges for lowering and keeping in position of 200mm dia DI D/F Sluice valve in the readymade trench true to alignment and gradient as per SS.

Jointing 150mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S.

Jointing 200mm dia CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) including hire charges of testing equipment, labour and materials needed for testing etc. complete as per S.S.

Manufacture, supply, delivery and fixing of required M.S. fabricated pipe and specials (Bends, Tees and Reducers etc.) using 8mm thick M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials conveyance to work spot and all labour charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of 150mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Supply and delivery of 200mm dia x 15mm thick MS Flanges including cost of Bolts, Nuts, Rubber packing etc. complete and flange thickness confirming to IS: 7322 - 1985 and Flange dimensions confirming to IS: 1538-1993 excluding cost of M.S. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per S.S.

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%