CGHBBSP/AHC/NITNO 121

AMOUNT PUT TO TENDER

SCHEDULE OF ITEM FOR CONSTRUCTION OF COMPOSITE SUB REGISTRAR BUILDING FOR SUB REGISTRAR-01, SUB REGISTRAR-02 & SUB REGISTRAR-03 AT DISTT- BILASPUR CHHATTISGARH

S.No. Particular Amount

1 Cost of Civil Work RS. 9739227.00

2 Cost of Water Supply & Sanitary Work RS. 544803.00

3 Cost Of Septic Tank RS. 133436.00

4 Cost of Internal Electrification and Fixers RS. 2578076.00

5 Cost of Rain Water Harvesting RS. 79360.00

6 Cost of Borewell i/c Pump installation with required fittings RS. 188252.00

7 Cost of Boundary Wall 300.00m Length RS. 2426339.00

8 Cost of 7.50M Wide Rcc Road RS. 1001850.00

Say Rs. In Lacs 166.91 Lacs

SCHEDULE OF ITEM FOR CONSTRUCTION OF COMPOSITE SUB REGISTRAR BUILDING FOR SUB REGISTRAR-01, SUB REGISTRAR-02 & SUB REGISTRAR-03 AT DISTT- BILASPUR CHHATTISGARH

S. No. I. No. PARTICULAR UNIT RATE Rate ( In words )

1 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. cum 185.00 Rs. One hundred eighty five only

1.1.2 In ordinary rocks. cum 267.00 Rs. Two hundred sixty seven only

2 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 7.20 Rs. Seven & Ps. Twenty only

3 1.6 Extra for every additional lift of 1.5 m or part thereof.

1.6.1 All types of soils cum 26.50 Rs. Twenty six & ps. Fifty only

4 1.6 Extra for every additional lift of 1.5 m or part thereof.

1.6.2 Ordinary or hard rocks cum 47.50 Rs. Fourty seven & Ps. Fifty only

5 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in each deposited layer by ramming and watering with

For Footing (Total Excavated Earth) low laying area cum 65.00 Rs. Sixty five only

6 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.00 Rs. Thee hundred seventy one only

7 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.00 Rs. One hundred thirty nine only

8 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. Sqm 184.00 Rs. One hundred eighty four only

9 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297.00 Rs. Two hundred ninety seven only

10 2.1.7 Suspended floors, roofs, access Kitchen Platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.00 Rs. Two hundred thirty five only

11 2.1.8 Beams, lintels, cantilevers & walls sqm 202.00 Rs. Two hundred two only

12 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 Rs. Two hundred ninety four only

13 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230.00 Rs. Two hundred thirty only

14 3.1. Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). Cum. 2659.00 Rs. Two thounsand six hundred fifty nine only

15 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.00 Rs. Two thousand nine hundred seventy only

16 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). cum 3552.00 Rs. Three thousand five hundred fifty two only

17 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm cum 4163.00 Rs. four thousand onee hundred sixty three only

18 3.3 Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.

3.3.2 M-25 grade cum 4298.00 Rs. Four thousand two hundred ninty eight only

19 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

a GF cum 97.50 Rs. Ninty seven ps. Fifty only

b FF cum 195.00 Rs. One hundred ninty five only

c SF cum 292.50 Rs. Two hundred ninty two ps. fifty only

20 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.2 Thermo-Mechanically treated bars FE 500D ) kg 54.50 Rs. Fifty four ps. Fifty only

21 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. cum 4237.00 Rs. four thousand two hundred thirty seven only

22 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. kg 43.50 Rs. Fourt three ps. Fifty only

23 3.21 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete.

3.21.2 25mm thick Sqm 768.00 Rs. Seven hundred sixty eight only

24 PWD ROAD SOR ITEM NO. 4.1 A (i) Granular Sub-base Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

Plant mix method (with Mechanically crushed stone only) Cum 1423.00 Rs. One thousand four hundred twenty three only

25 PWD ROAD SOR ITEM No . 4.10 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.) Cum 1434.00 Rs. One thousand four hundred thirty four only

26 PWD ROAD SOR ITEM NO. 4.13 (B) Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete.

With smooth wheeled roller Cum 277.00 Rs. Two hundred seventy seven only

27 4.13 Grading roof for water proofing treatment with: Cement concrete 1:2;4 (1 cement : 2 coarse sand :4 graded stone aggrigate 20mm nominal size)

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 3817.00 Rs. Three thousand eight hundred seventeen only

28 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 Rs. Three thousand two hundred sixty three only

29 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

a GF cum 121.00 Rs. One hundred twenty one only

b FF cum 242.00 Rs. Two hundred fourty two only

30 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:

7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 382.00 Rs. Three hundred eighty two only

31 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:

Qty same as above sqm 11.00 Rs. elevan only

32 8.1 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.

8.1.2 Sal, bijasal, benteak, khair, haldu cum 61051.00 Rs. sixty one thousand fifty one only

33 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm. each 72.50 Rs. Seventy two ps. fifty only

34 8.4 Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.

8.4.3 Dash fastener 12x100mm each 39.00 Rs. Three nine only

35 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges

A 8.12.2 35 mm. thick (single leaf) sqm 2005.00 Rs. two thousand five only

B 8.12.3 30 mm thick (single leaf) sqm 1832.00 Rs. One thousand eight hundred thirty two only

36 8.15 Extra for double leaf shutter instead of single leaf. sqm 52.00 Rs. Fifty two only

37 8.120 Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickel plated iron nuts bolts and screws etc complete.

8.120.2 250x16mm each 141.00 Rs. One hundred fourty one only

38 8.121 Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.

8.121.2 250x12mm each 51.50 Rs. Fifty one ps. fifty only

39 8.122 Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete.

8.122.2 200 x10mm each 57.50 Rs. Fifty seven ps. fifty only

40 8.123 Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.

8.123.1 150 mm each 30.50 Rs. thirty ps. fifty only

41 8.132 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.

8.132.1 150x2.5mm (heavy) each 97.50 Rs. Ninty ps. fifty only

42 8.137 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.

8.137.1 300mm each 238.00 Rs. Two hundred thirty eight only

43 8.138 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.

8.138.2 250mm each 85.00 Rs. Eighty five only

44 8.139 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.

8.139.1 250 x10mm each 97.00 Rs. Ninty Seven only

45 8.140 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete.

8.140.1 150 mm each 24.50 Rs. Twenty four ps. fifty only

46 8.143 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete.

8.143.2 Double each 65.00 Rs. Sixty five only

47 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out ofextruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge rmt 346.00 Rs. Three hundred fourty six only

48 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter).

49 Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive.

8.152.2 Both side Pre-laminated panel PVC door shutter sqm 2832.00 Rs. Two thousand eight hundred thirty two only

50 9.6 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.

9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 68.00 Rs. sixty eight only

51 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.50 Rs. Sixty seven ps. Fifty only

52 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. sqm 791.00 Rs. Seven hundred ninty one only

53 9.39 Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/ wooden/ angle iron posts (straight or diagonal) including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete(Cost of posts, struts to be paid for separately) Mtr. 9.40 Rs. Nine ps. fourty only

54 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:)

a 9.47.1 For fixed portion kg 331.00 Rs. Three hundred thirty one only

b 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).

Qty same as above kg 338.00 Rs. Three hundred thirty eight only

55 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.2 With float glass panes of 5 mm thickness sqm 708.00 Rs. Seven hundred eight only

56 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 304 kg 525.00 Rs. Five hundred twenty five only

57 9.61 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately)

9.61.2 4mm thick sqm 1745.00 Rs. One thousand seven hundred fourty five only

58 10.41 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. rmt 68.00 Rs. sixty eight only

59 10.61 Providing and fixing at all height false ceiling consisting of frame work "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to

2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. sqm 658.00 Rs. six hundred fifty eight only

11.1 Providing and making 6mm thick cement plaster of mix:

60 11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.00 Rs. Eighty seven only

61 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:5 (1 cement : 5 fine sand) sqm 91.50 Rs. ninty one ps. fifty only

62 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.3 In Cement Mortar 1:5 (1 cement : 5 fine sand) sqm 113.00 Rs. One hundred thirteen only

63 11.5 Neat Cement punning. sqm 33.00 Rs. Thirty three only

64 11.40 Making groove in cement plaster while plastering upto10 mm deep and 10 mm wide. rmt 1.30 Rs. One ps. thirty only

65 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.00 Rs. Eighty six only

66 electrical sor 2020 item no.12.1 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, etc. (but without charcoal or coke and salt) as required. Set 3243.00 Rs. Three thousand two hundred fourty three only

67 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.

12.3.2 50 mm thick sqm 254.00 Rs. Two hundred fifty four only

68 12.8 Providing and fixing plain cement concrete fibre reinforced heavy dutydesigner glazed floor tiles with uniform colour (for coloured tiles) and texture conforming to IS: 1237 (for abrasion wear) and IS : 516 (for compressive strength) of approved make, colours, shades and size on cement Mortar bed and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

12.8.2 On floor, steps and risers over 20mm thick bed of cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 905.00 Rs. Nine hundred five only

69 12.45 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above)

12.45.3 Granite stone lakha red/ shahi red sqm 4200.00 Rs. Four thousand two hundred only

70 12.74 Providing and fixing rectified glazed ceramic tiles of 1st quality conforming to IS : 15622-2017 of approved make,in colours, shades over 20 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

12.74.1 Size 300x300mm thickness 7 to 8 mm sqm 779.00 Rs. Seven hundred seventy nine only

71 12.75 Providing and fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS : 15622-2017 of approved make,in colours, shades on wall /dado over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

12.75.1 Size 300x450mm thickness 7 to 8 mm sqm 710.00 Rs. Seven hundred ten only

72 12.76 Providing and laying Glazed Vitrified Floor tiles (GVT/PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours,shade and size mensioned below(+/- 10mm),laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete.

12.76.2 Size 800x800mm thickness 9 to 10 mm sqm 1153.00 Rs. One thousand one hundred fifty three only

73 13.19 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.

13.19.2 Granite work rmt 172.00 Rs. One hundred seventy two only

74 14.17.1 Painting exterior surface with TEXTURED exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm sqm 140.00 Rs. One hundred fourty only

75 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. sqm 94.50 Rs. Ninty four ps. fifty only

76 14.14.1 Finishing walls with water proofing cement paint of required shade to give an even shade.On new work (Two or more coats applied @ 3.84 kg/10 sqm) Sqm 41.00 Rs. Fourty one only

77 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. sqm 23.00 Rs. Twenty three only

78 14.11.1 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade.On new work (two or more coats) sqm 52.50 Rs. Fifty two ps. fifty only

79 14.22.1 Painting on new work (two or more coats) to give an even shade with:Satin synthetic enamel paint sqm 55.00 Rs. Fifty five only

80 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.1.3 White Orissa pattern W.C. pan of size 580x440 mm each 2899.00 Rs. Two thousand eight hundred ninty nine only

81 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.4.1 White pedestal type each 2882.00 Rs. Two thousand eight hundred eighty two only

82 18.10 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour:

18.10.2 45 CM length each 66.50 Rs. Sixty six ps. Fifty only

83 18.13 Providing and fixing white vitreous china urinal basin with waste fittingas per IS : 2556, and other couplings in C.P. brass complete:

18.13.1 Flat back half stall urinal of size 460x380x250mm each 1776.00 Rs. One thousand seven hundred seventy six only

84 18.16 Providing and fixing one piece construction white vitreous china

squatting plate urinal with an integral rim longitudinal flushing pipe. each 1401.00 Rs. One thousand four hundred one only

85 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

18.17.3 White size 450x325 mm each 1203.00 Rs. One thousand two hundred three only

86 18.22 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

18.22.2 560x410 mm bowl depth 215 mm. each 6210.00 Rs. Six thousand two hundred ten only

87 18.25 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

18.25.1 32 mm dia each 68.50 Rs. Sixty eight ps. fifty only

88 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599.00 Rs. Five hundred ninty nine only

89 18.31 Providing and fixing 600x120x5mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete. each 272.00 Rs. Two hundred seventy two only

90 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. a. 75mm dia Make: (Supreme/Finolex)

A 18.76.1 75mm dia pipe rmt 182.00 Rs. One hundred eighty two only

B 18.76.2 110mm dia pipe rmt 267.00 Rs. Two hundred Sixty seven only

91 18.77 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

A 18.77.1.1 75mm each 113.00 Rs. One hundred thirteen only

B 18.77.1.2 110mm each 154.00 Rs. One hundred fifty four only

18.77.2 Double "Y" with or without door

C 18.77.2.1 75mm each 129.00 Rs. One hundred twenty nine only

D 18.77.2.2 110mm each 224.00 Rs. Two hundred twenty four only

18.77.3 Vent cowel

E 18.77.3.1 75mm each 34.00 Rs. Thirty four only

F 18.77.3.2 110mm each 44.00 Rs. Fourty four only

G 18.77.6 Nahani trap 110x75mm each 90.50 Rs. Ninty ps. Fifty only

92 18.78 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

A 18.78.1 75 mm each 57.00 Rs. Fifty seven only

B 18.78.2 110 mm each 61.00 Rs. Sixty one only

93 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc.,

A 19.5.1 15 mm nominal outer dia .Pipes. rmt 133.00 Rs. One hundred thirty three only

B 19.5.2 20 mm nominal outer dia .Pipes. rmt 167.00 Rs. One hundred sixty seven only

C 19.5.3 25 mm nominal outer dia .Pipes. rmt 213.00 Rs. Two hundred thirteen only

94 19.9 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete:

19.9.6 50 mm dia. nominal bore meter 398.00 Rs. Three hundred ninty eight only

95 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc.and testing of joints complete

19.7.3 25 mm nominal outer dia pipes rmt 258.00 Rs. Two hundred fifty eight only

96 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

A 19.14.1 Bib cock (450gms) each 382.00 Rs. Three hundred eighty two only

B 19.14.3 Long body bib cock (500 grams) each 426.00 Rs. Four hundred twenty six only

D 19.14.4 Piller Cock (400 grams) each 398.00 Rs. Three hundred ninty eight only

E 19.14.5 Two way bib cock (800 grams) each 708.00 Rs. Seven hundred eight only

C 19.14.7 Angle valve for basin mixer and geyser points (450gms) each 382.00 Rs. Three hundred eighty two only

F 19.14.14 Soap dish plate each 163.00 Rs. One hundred sixty three only

G 19.14.16 Towel rail (600mm long x 20mm dia) each 338.00 Rs. Two hundred thirty eight only

J 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) each 774.00 Rs. Seven hundred seventy four only

97 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.00 Rs. Fifty one only

98 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

19.16.1 25 mm nominal bore each 436.00 Rs. Four hundred thirty six only

99 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ltr. 7.30 Rs. Seven ps. Thirty only

100 20.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 100mm dia pipe rmt 357.00 Rs. Three hundred fifty seven only

101 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all-round S.W. pipe including bed concrete 150mm thick as per standard design:150 mm diameter S.W. pipe 150mm dia pipe rmt 436.00 Rs. Four thousand three hundred thirty six only

102 20.7.1 Constructing brick masonry manhole with well burnt modular clay brickscrushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cementconcrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (lightduty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each NOS 6703.00 Rs. Six thousand seven hundred three only

103 20.28 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not lessthan 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. coverwith frame (light duty) 455x610 mm internal dimensions, total weight of coverwith frame to be not less than 38 kg (weight of cover 23 kg and weight offrame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bedconcrete etc. complete as per standard design

20.28.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : each 3796.00 Rs. Three thousand nine hundred ninty six only

20.28.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one ortwo inlets : each 4357.00 Rs. Four thousand three hundred fifty seven only

104 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.00 Rs. One thousand seven hundred nine only

105 21.1 Boring/drilling bore well perfectly vertical for the specified depth suitable toreceive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire &running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.150 mm dia

a 21.1.1.3 150 mm dia. RM 339.00 Rs.three hundred thirty nine only

b 21.2.2.3 150 mm dia. RM 424.00 Rs. Four Hundred Twenty Four only

106 21.3 Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.

21.3.3 150 mm nominal size dia. meter 540.00 Rs. Five hundred fourty only

107 21.4.3 Supplying, assembling, lowering and fixing in vertical position in bore wellunplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineerin- charge150 mm nominal size dia. RM 546.00 Rs. Five hundred fourty six only

108 21.14.1 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). [Agreemented Item No.-227, Page-39 of 45]

Stone boulders of size range 5 cm to 20 cm, in recharge pit. cum 863.00 Rs. Eight hundred sixty three only

109 21.14.2 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). [Agreemented Item No.-228, Page-39 of 45]

Gravels of size range 5 mm to 10 mm, over the existing layer of boulders cum 806.00 Rs. Eight hundred six only

110 21.14.3 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). [Agreemented Item No.-229, Page-40 of 45]

Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel cum 471.00 Rs. Four hundred seventy one only

111 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point ispayable) point 1502.00 Rs. One thousand five hundred two only

112 23.3 PWD Elect SOR Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as required.

23.3.2 1.5 HP, single phase Each 17589.00 Rs. seventeen thousand five hundred eighty nine only

113 23.4 PWD Elect SOR Supplying and fixing of following sizes 'B' class G I pipe with welded steel flange of suitable size at both the end of every pipe length, fixing with submersible pump and lowering with the pump in the bore well including necessary rubber gasket, nuts & bolts etc. as required.

23.4.5 40 mm dia. Mtr 268.00 Rs. Two hundred sixty eight only

114 23.7 PWD Elect SOR Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as required.

A 23.7.6 32 mm dia. Each 526.00 Rs. Five hundred twenty six only

B 23.7.7 25 mm dia. Each 455.00 Rs. Four hundred fifty five only

115 23.11 PWD Elect SOR Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 Rs. Four thousand thirty only

116 23.14 PWD Elect SOR Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as required

23.14.2 3x2.5 sqmm each 64.00 Rs. Sixty four only

117 23.15 PWD Elect SOR Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as required.

23.15.2 3x2.5 sqmm Each 261.00 Rs. Two hundred sixty one only

SCHEDULE OF ITEMS FOR INTERNAL ELECTRIFICATION WORK FOR SUB REGISTRAR OFFICE AT BILHA, DISTT.-BILASPUR (C.G.)

S.N. CSR Item No. Particulars of Item Unit Rate Rate In Word

01 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.7.1 Short Point Point 266.00 Two Hundred Sixty Six Rupees Only

1.7.2 Medium Point Point 424.00 Four Hundred Twenty Four Rupees Only

1.7.3 Long Point Point 588.00 Five Hundred Eighty Eight Rupees Only

02 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 Four Hundred Twenty Rupees Only

03 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 Two Hundred Sixteen Rupees Only

04 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.10.2 Medium Point Point 659.00 Six Hundred Fifty Nine Rupees Only

1.10.3 Long Point Point 922.00 Nine Hundred Twenty Two Rupees Only

1.10.4 Extra Long Point I Point 1302.00 One Thousand Three Hundred Two Rupees Only

05 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.11.3 Long Point Point 1350.00 One Thousand Three Hundred Fifty Rupees Only

1.11.4 Extra Long Point I Point 1807.00 One Thousand Eight Hundred Seven Rupees Only

1.11.5 Extra Long Point II Point 2315.00 Two Thousand Three Hundred Fifteen Rupees Only

1.11.6 Extra Long Point III Point 2825.00 Two Thousand Eight Hundred Twenty Five Rupees Only

06 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.13.1 3 X 1.5 sq. mm in 20mm conduit Mtr 92.00 Ninety Two Rupees Only

1.13.2 3 X 2.5 sq. mm in 20mm conduit Mtr 111.00 One Hundred Eleven Rupees Only

1.13.3 6 X 2.5 sq. mm in 25mm conduit Mtr 172.00 One Hundred Seventy Two Rupees Only

1.13.4 9 X 2.5 sq. mm in 32mm conduit Mtr 238.00 Two Hundred Thirty Eight Rupees Only

1.13.14 6 X 10 sq. mm in 40mm conduit Mtr 515.00 Five Hundred Fifteen Rupees Only

07 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5)

1.15.2 25 mm Mtr 53.00 Fifty Three Rupees Only

08 3.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010)

3.11.3 3 x 1.5 sq. mm Mtr 37.00 Thirty Seven Rupees Only

3.11.11 1 x 2.5 sq. mm Mtr 22.00 Twenty Two Rupees Only

3.11.21 1 x 4 sq. mm Mtr 30.00 Thirty Rupees Only

3.11.23 3 x 4 sq. mm Mtr 82.00 Eighty Two Rupees Only

09 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification and IS: 694 (2010) Mtr 19.00 Nineten Rupees Only

10 4.4 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as per specification.

4.4.1 75mmX75mm (1/2 Module) Each 99.00 Ninety Nine Rupees Only

11 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification.

5.4.4 15/16 amp switch Each 89.00 Eighty Nine Rupees Only

5.4.6 6 pin 15/16 amp socket outlet Each 120.00 One Hundred Twenty Rupees Only

5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 223.00 Two Hundred Twenty Three Rupees Only

5.4.11 Plug Top (Deluxe type) 3 pin 16 Amps (For power plug). Each 85.00 Eighty Five Rupees Only

5.4.17 Computer Outlet Jack Each 242.00 Two Hundred Fourty Two Rupees Only

5.4.22 Batten/ angle holder Each 41.00 Fourty One Rupees Only

5.4.18 25/32 amp A.C. Starter switch Each 246.00 Two Hundred Fourty Six Rupees Only

5.4.23 Blanking plate Each 28.00 Twenty Eight Rupees Only

12 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 Eight Hundred Sixteen Rupees Only

13 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 42.00 Fourty Two Rupees Only

14 6.12 Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan) Each 56.00 Fifty Six Rupees Only

15 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. (Only face area is to be measured)

7.19.2 Above 300 mm and upto 450 mm deep sqm 7525.00 Seven Thousand Five Hundred Twenty Five Rupees Only

16 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as required.

7.20.2 200 amp (30x5mm) Mtr 907.00 Nine Hundred Seven Rupees Only

17 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.

9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 One Thousand Four Hundred Eighty Three Rupees Only

9.1.2 3 pole MCCB, 80-100A, Fixed Thermal Release, 10KA Each 1600.00 One Thousand Six Hundred Rupees Only

9.1.10 3 pole MCCB, 250A, Adjustable Thermal - Magnetic Release, 35KA Each 13060.00 Thirteen Thousand Sixty Rupees Only

18 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)

9.4.4 4 way Double door Each 1716.00 One Thousand Seven Hundred Sixteen Rupees Only

9.4.5 6 way Double door Each 2038.00 Two Thousand Thirty Eight Rupees Only

19 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.

9.11.2 6 amps to 32 amps Each 148.00 One Hundred Fourty Eight Rupees Only

20 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.

9.16.5 63 amps Each 1316.00 One Thousand Three Hundred Sixteen Rupees Only

21 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 Ninety Four Rupees Only

22 10.18 Providing and fixing penal mounting following rating digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.

10.18.2 0-100 amps Each 372.00 Three Hundred Seventy Two Rupees Only

23 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.

10.20.2 Digital type Each 835.00 Eight Hundred Thirty Five Rupees Only

24 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification.

10.21.1 For voltmeter Each 189.00 One Hundred Eighty Nine Rupees Only

10.21.2 For ammeter Each 207.00 Two Hundred Seven Rupees Only

25 12.10 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification. Mtr 53.00 Fifty Three Rupees Only

26 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification:

12.19.2 With 2 metre long GI Pipes and 25 kg back filling compound. Each 8222.00 Eight Thousand Two Hundred Twenty Two Rupees Only

27 15.3 Supplying and laying following sizes one number FRLS PVC insulated, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/HUME/ STONEWARE/ METAL/HDPE pipe as perspecification, IS:9537 (2000,Part5)

15.3.16 3.5 x 120 sq. mm. Mtr 381.00 Three Hundred Eighty One Rupees Only

28 15.23 Supplying and making end termination with brass compression gland and aluminum lugs forfollowing size armoured aluminum conductor power cable of 1.1 KV grade as per specification..

15.23.13 3½ X 35 sq. mm (28 mm) Each 153.00 One Hundred Fifty Three Only

29 20.6 Supplying and erection of angle/channel iron cross arms/ bracket/ other fitting of approved size and shape including drilling of holes for insulator pins, bolts and nuts etc as per specification. kg 77.00 Seventy Seven Rupees Only

30 6.4 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, including connection, earthing etc. complete as per specification. Each 2662.00 Two Thousand Six Hundred Sixty Two Rupees Only

31 6.5 Supplying and fixing of wall/ cabin fan including connection etc. as per specification. P.F. should be greater than 0.9

6.5.2 400 mm sweep Each 2043.00 Two Thousand Fourty Three Rupees Only

32 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9

6.6.1 300 mm sweep Each 2446.00 Two Thousand Four Hundred Forty Six Rupees Only

33 6.15 Supplying, installation, testing and commissioning of following LED fitting (luminaries) down lighters in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.

6.15.6 18/20 Watt Each 868.00 Eight Hundred Sixty Eight Rupees Only

34 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.

6.19.3 18/20 watt {4 feet} Each 443.00 Four Hundred Forty Three Rupees Only

35 6.27 Supplying, installation, testing and commissioning of following LED Bulk Head fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP65

6.27.1 10 watt Each 1140.00 One Thousand One Hundred Forty Rupees Only

36 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.

6.28.6 45 watt Each 2729.00 Two Thousand Seven Hundred Twenty Nine Rupees Only

37 11.2 Supplying, installation, testing and commissioning following rating single phase in single phase out ON-LINE UPS including connection etc but without batteries as per specification.

11.2.2 3 KVA with DC bus voltage 72 V Each 33027.00 Thirty Three Thousand Twenty Seven Rupees Only

38 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification.

11.4.5 150 AH Each 14252.00 Fourteen Thousand Two Hundred Fifty Two Rupees Only

39 24.3 Supplying of approved make split type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 3 metre of copper piping with insulation, etc complete as per specification:

24.3.3 2.0 ton split type capacity 6000 kcal / hr (3 star). Each 48012.00 Fourty Eight Thousand Twelve Rupees Only

40 24.4 Installation of split type Inverter/Non Inverter Air Conditioner unit, cooling unit on wall inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification. (Extra length of copper piping and power cable shall be paid extra on linear basis) Each 2110.00 Two Thousand One Hundred Ten Rupees Only

41 24.7 Supply and fixing of approved make wall mounting type voltage stabilizer with input volts 160-250, output volts 200-240 volts and double step relay on desired location with necessary fixing material including connection etc complete as per specification.

24.7.2 5 KVA Each 4367.00 Four Thousand Three Hundred Sixty Seven Rupees Only

42 24.12 Supplying, connecting and fixing 15mm dia PVC flexible drain pipe (reinforced with nylon threads) in drain outlet of split type air conditioners etc complete as per specification. Mtr 14.00 Fourteen Rupees Only

43 27.46 Supplying, Installation, Testing and Commissioning of 9U Indoor Rack Wallmount 9U 630D With Front Glass Door Lock & Key 550 9U - (with 1U cable Manager,fan,6 socket PDU) complete as required. Each 4168.00 Four Thousand One Hundred Sixty Eight Rupees Only