CERTAIN REPAIR TO JOINERY CUP BOARDS AND INTERNAL PLUMBING ISSUES TO OFFRS QUARTER IN NORTH COMPLEX AT IMA DEHRADUN

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed.

Taking down steel window shutter n.exc 1 Sqm and refixing in the same opening after replacement of broken hinges including welding,grinding, painting etc each complete all as specified and directed.

Taking down shutter of any description n exc 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

M&L for 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L Preparation of wood or wood based materials new or old of any description and girth and treated with two coat of creosote complete all as specified and directed.

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed.

M&L for 1st class hardwood teak 40mm thick Framed louvred shutters with stiles and rails 100 to 120 mm wide and panels filled with fixed louvres from 10 to 15 mm thick complete all as specified and directed.

M&L for 1st class hardwood 50mm thick Framed louvred shutters with stiles and rails 80 to 100 mm wide with fixed louvres from 15 to 20 mm thick frame put together with glue, pinned at jointcomplete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:- Rajshree plastiwood/ Giza/ Ecocell.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:- Rajshree plastiwood/ Giza/ Ecocell.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Make:- Rajshree plastiwood/ Giza/ Ecocell.

M&L for 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed. Make : Ecocell (Kumar Arch Tech Pvt Ltd) / Giza / Rajshree plastiwood.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-B(18mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking etc complete all as specified and directed. Shutter Top & bottom size : 52.00 X 18mm X1.45mm Section No 20737 Shutter inner lock size 40.00 X 18mm X 1.55mm Section No 20736 Chowkhat bottom/ Top size : 92.00 X 31.75mm X 1.50mm Section No 20832 Chowkhat both sides size: 92.00X31.75mm X 1.50mm Section No 20831

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as specified and directed.

S&F 35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F factory made 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F Butt hinges, 100mm long, medium weight, stainless steel complete all as specified and directed.

S&F Butt hinges, 100 mm long, extruded aluminium alloy,with mild steel hinge pin anodised complete all as spacified & directed.

S&F Tee hinges, 150 mm long stainless steel tee hinges, complete all as spacified & directed.

S&F Butt hinges, 75 mm long, medium weight, stainless steel complete all as specified and directed.

S&F Butt hinges, 50 mm long, medium weight, stainless steel complete all as specified and directed.

S&F 250mm long stainless steel sliding door bolts, with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate complete all as specified and directed.

S&F in repairs 250mm long stainless steel sliding door bolts, with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 Cm in length, thickness of metal to be welded exc 9 mm and n.exc. 20 mm complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, including hacking out old broken glasses complete all as specified & directed.

M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer using mechanical means complete all as specified and directed.

M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer using mechanical means complete all as specified and directed

S&F in repairs Drapery rod in any length, high strength stain less steel pipe with corrugated stain less steel extrusion having outer dia 28mm a pair of brackets, complete all as specified and directed.

S&F in repairs Decorative finals stainless steel in matching colour of rod, complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal out side of IMA premises complete all as specified & directed.

M&L for 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 for receiving wall tiles complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout cement to match complete all as specified and directed.

M&L for Virfied ceramic Dark shade coloured tiles 8 to 9 mm thick (Square or rectangular) polished,area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same color tile grout to match complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid on verticale surface such as skirting, dado etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450x300x 6-7 mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.

Demolition of brick work, built in cement or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work or precast concrete articales including removal out side of IMA premises complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) including removal out side of IMA premises complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.

M&L for 22-25 mm thick heavy duty Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc concrete complete all as specified and directed.

M&L PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in coping/benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Desludging/cleaning of open drain of any depth by mechanically means and burring the sludge into the ground complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removal out side of IMA premises complete all as specified and directed.

M&L for 15mm thick ready mix external sand faced cement plaster on brick, concrete surfaces, jambs and Ceiling including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ Unicrete.

M&L 18 mm thick one side prelaminated colour WPC Sheet for cup board shutter and frame & fixed at site complete all as specified and directed.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

M&L Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) by mechanical means complete all as specified and directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

S&F 4mm thick E-board false ceiling (Classic) tile size 600mm X 600mm as in ceiling fixed on existing grid including straightening the grid and taking dowan carefully old board complete all as specified & directed.

Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore of pipe complete all as specified and directed.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore of pipe complete all as specified and directed.

S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Dismantling stone slab & tiles of any description or thickness, in floor, aprons etc, laid dry & pointed complete all as specified and directed.

M&L for Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone complete all as specified and directed.

S&F in repairs Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of CI 'P' or 'S' trap including concrete bedding and making good existing floor complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, of size 550x400mm including bracket complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe complete all as specified and directed. Make:- Cera/ Hindware/ Parry ware

S&F in repairs Stainless steel plate rack of size 31 inch X 36 inch X 10 inch complete all as specified and directed. Make :- Make:- Prayag / Blue star/ Nirali.

S&F in repairs 15mm bore short body bib tap chromium plated with wall flange and aerator complete all as specified and directed. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F in repairs Chromium plated pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F in repairs 15mm dia chromium plated concealed stop cock, heavy body with cap complete all as specified and directed. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 Cm long complete all as specified and directed.

S&F Corner glass shelf assembly 300 mm size with bracket complete all as specified and as directed.

S&F in repairs of toilet paper holder of stainless steel fiexed to walls with chromium plated brass screws, complete all as specified and directed. Make:- Jaquar/ Cera/ Prayag.

S&F CP brass hot & cold mixer cast copper alloy with centre hold for WHB and long shank fancy type 15m bore complete all as specified and directed. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy complete all as specified and directed. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy complete all as specified and directed. Make:- Jaquar/ Cera (Victor series)/ Prayag (7000 series).

S&F CP brass shower rose fency type 50mm dia with extension Arm pipes CP complete all as specified and directed. Make:- Jaquar/ Cera/ Prayag.

S&F in repair CP Helth fauset telephonic type with CP flexible pipe . Make : Jaquar/ Cera/ Prayag.

M/S RAJESH KUMAR GOYAL

M/S S P BUILDERS

M/S PUNDIR BUILDERS

Amit Traders

Sharda Enterprises